With the development of society step by step, we use more and more agreements, and signing agreements can effectively restrain breach of contract. So do you really know how to write a good agreement? The following is a sample of the construction safety responsibility agreement I collected for you. Welcome everyone to learn from it, I hope it will help you.
Construction safety responsibility agreement 1 Party A:
Party B:
In order to seriously implement the policy of "safety first, prevention first", ensure the safety of construction production, take safety protection measures according to regulations and implement safety production, safety production must be included in various economic contracts, and safety must be emphasized in efficiency and production. To this end, the two sides signed a letter of responsibility for the construction safety of this project.
I. Party B's responsibility for production safety:
1, strict safety management, seriously organize and implement the technical measures of construction safety in the construction organization design (or construction scheme), establish a unified and standardized five certificates and one map, and have safety signs, color codes and warning signs on site to achieve civilized construction.
2. Lead the team to hold regular safety work meetings, earnestly carry out weekly safety day activities, regularly check the safety management of the production site according to the construction safety checklist, carefully find out the hidden dangers of accidents, and formulate various safety technical measures to ensure safe production in the whole construction process.
3, organize learning safety operation procedures, and check the implementation, safety education must be carried out for new workers, especially the management education of labor and employment, educate workers to obey the rules and discipline, correctly use safety precautions and protective equipment, and be responsible for checking whether special operations personnel hold relevant certificates.
4, supervise and guide the team in strict accordance with the technical operation procedures and safe operation, to stop illegal command and risky operations.
5, site erection of "two networks" and installation of large machinery, electrical equipment (with machine controller) and other safety protection devices, there must be technical disclosure acceptance procedures, before use.
6, the unsafe hidden trouble, must be issued by the municipal or company security department engineering safety notice, and according to the notice of rectification within a time limit.
7. In case of industrial accidents, especially heavy casualties and major accidents, it is necessary to protect the site, immediately report the results of the accident investigation, fill in the report form, and implement the rectification measures, which shall not be concealed. Falsely reporting or deliberately delaying reporting, and it is even more impossible to deal with it without authorization.
8, the site to establish post responsibility system and fire prevention measures, and urge the relevant personnel to do a good job of construction safety technical information in the industry.
Second, the safety rewards and punishment regulations:
1. Party B guarantees that during the project construction, it will conscientiously implement the Labor Law, Technical Regulations for Safety of Construction and Installation Projects and a series of safety regulations, rules, regulations and decrees of the Ministry, province, city and company. Strictly abide by all safety instructions, prohibit illegal operations, and do a good job in all safety protection facilities on the construction site according to the standard requirements of "one standard and three specifications". Ensure that the frequency of minor injuries on the construction site is above 80 points (mainly including: ① safety management ② civilized construction ③ scaffolding ④ Sambo, four mouths and five limbs ⑦ construction electricity ⑧ tower crane, elevator ⑧ construction machinery ⑨ fire control and sanitation, etc. ) in the company's safety inspection and the regular or irregular inspection by the superior safety supervision department, it shall not exceed 1 person-time. At the end of the year, Party A will reward Party B with XX~4000 yuan.
2. If Party B fails to meet the safety requirements (the inspection score is lower than 70 points) in the safety inspection of the competent department or company, Party A will fine Party B XX~4000 yuan depending on the score.
3. In the safety inspection of the municipal safety supervision department or company, if Party B's safety protection facilities are found to be missing or unqualified, and all of them are unqualified after rectification within a time limit, Party A will fine Party B 3000~5000 yuan.
4. There was an industrial accident at the construction site, which was not reported to the company and was not properly handled. If the injured person complains to the relevant municipal departments and damages the company's image and reputation, Party A will fine Party B 5,000 yuan.
5. In case of heavy casualties on Party B's construction site, Party A will pay Party B a fine of 8000 ~ 15000 yuan depending on the severity of the accident. Anyone who violates safety regulations shall be investigated for criminal responsibility according to law.
This responsibility book is made in duplicate, each party holds one copy, which has the same effect. It will take effect after being signed and sealed by both parties.
Person in charge of Party A:
Person in charge of Party B:
Xx year xx month xx day
Construction Safety Responsibility Agreement 2 Party A: _ _ _ _ _ _ _ Party B: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
In order to implement the policy of "safety first, prevention first", clarify the responsibilities of both parties for production safety and ensure construction safety, both parties sign this agreement at the same time as signing the construction project contract, which must be strictly implemented by both parties.
I. Party A's responsibilities:
1. Seriously implement the laws and regulations on labor protection and safety in production promulgated by People's Republic of China (PRC), People's Republic of China (PRC) Fire Protection Law, People's Republic of China (PRC) Environmental Protection Law, People's Republic of China (PRC) Occupational Disease Prevention Law and Labor Law.
2. Conduct safety education for Party B's construction personnel.
3. Conduct safety technical disclosure for Party B's construction.
4. Urge Party B to seriously implement the safety production rules and regulations of this project department.
5. Supervise and inspect Party B's labor protection and occupational disease prevention.
6. Supervise and inspect Party B's environmental protection and civilized construction.
7. Urge Party B to rectify and check the hidden dangers of accidents on site.
8. Investigate and collect evidence of Party B's general accidents, and put forward suggestions for handling and rectification.
9. Actively cooperate with Party B's rescue work in case of safety accident.
Two. Party B's responsibilities:
1. Seriously implement the laws and regulations on labor protection and safety in production promulgated by People's Republic of China (PRC), People's Republic of China (PRC) Fire Protection Law, People's Republic of China (PRC) Environmental Protection Law, People's Republic of China (PRC) Occupational Disease Prevention Law and Labor Law.
2. Party B must strictly abide by the safety rules, regulations and operating procedures formulated by the Water Survey Institute and Party A, and strictly obey the safety supervision and management of Party A's personnel. And appoint a special person to supervise the safe construction.
3, all construction personnel must go through the three-level safety education, mount guard after passing the exam. Special operations personnel must hold corresponding valid special operations operation certificates and be trained to take up their posts. It is strictly forbidden to work without a license and without safety training.
4. Implement the principle that whoever works is responsible. If Party B's personnel cause casualties, fires, fires, machinery and other accidents during the construction period (including casualties of Party A's personnel, other personnel and pedestrians caused by Party B's responsibility), Party A has the obligation to assist in emergency rescue of the wounded, and Party B is responsible for accident report, economic compensation and after-treatment treatment.
5. After Party A notifies the construction, Party B shall carry out the construction within the designated construction scope. During the construction period, Party B shall carefully set up protection according to regulations, and shall not expand the construction scope without authorization. If it is necessary to expand the scope of construction, Party B must negotiate with Party A in advance and obtain Party A's consent before construction, otherwise Party B shall bear the consequences arising from construction.
6. During the construction period, underground pipelines and overhead lines within the construction scope must be protected. Due to Party B's reasons, all responsibilities and economic losses caused by signal and power interruption accidents in the construction process shall be borne by Party B, and Party B shall actively cooperate with Party A for emergency repair and pay corresponding emergency repair expenses.
7. After signing the construction contract, Party B shall voluntarily go through the temporary registration formalities at the public security organ of the temporary residence.
8. Party B shall check the labor protection of construction personnel before work every day, urge the construction site personnel to wear safety protection articles consciously, and explain the construction safety precautions.
9. Party B has the right to refuse the construction and report to Party A in case that personal and property safety may be endangered or there is no safe production environment.
If Party B violates the above terms and fails to make timely and effective rectification after Party A proposes rectification, Party A has the right to stop Party B's on-site construction; Party B shall be fully responsible for the safety accidents caused by Party B's failure to meet Party A's requirements or fulfill its own obligations.
Third, others.
1. This agreement is made in duplicate, with each party holding one copy;
2. This agreement shall come into force as of the date of signing, and shall automatically become invalid after the completion of construction.
Party A: Water Resources Exploration Institute of Bureau of Geology and Mineral Resources.
Party B: Water Resources Exploration Institute of Bureau of Geology and Mineral Resources.
Xx year xx month xx day
Construction Safety Responsibility Agreement 3 In order to create a safe and efficient construction environment and do a good job in the safety management of this project during the implementation of the construction contract, the owner of this project (hereinafter referred to as "Party A") and the contractor (hereinafter referred to as "Party B") hereby sign a safety production contract:
I. Responsibility of Party A
1, strictly abide by the national laws and regulations on production safety, and earnestly implement the relevant safety requirements in the project contract.
2. According to the principle of "safety first, prevention first" and "production must be safe", production and safety work are planned, arranged, inspected, summarized and evaluated at the same time.
3. Important safety facilities must adhere to the principle of "three simultaneities" with the main project, that is, design, approval, construction, acceptance and operation at the same time.
4. Hold regular safety production dispatching meetings to timely convey the central and local safety production spirit.
5. Organize the production safety inspection of Party B's construction site, and supervise Party B to deal with all potential safety hazards found in time.
Two. Party B's responsibilities
1, strictly abide by national laws and regulations on safety in production, Technical Specification for Safety in Highway Engineering Construction (JTJ 076-95) and Operation Specification for Road Construction Machinery issued by the Ministry of Communications, and earnestly implement the safety requirements in project contracting.
2. Adhere to the principles of "safety first, prevention first" and "safety must be in charge of production", strengthen publicity and education on safety production, enhance the safety awareness of all staff, establish and improve various safety production management institutions and safety production management systems, equip full-time and part-time safety inspectors, and organize and lead safety production activities. Leaders at all levels, engineering and technical personnel, production management personnel and specific operators must be familiar with and abide by the provisions of this clause, so that production and safety work can be planned, arranged, inspected, summarized and evaluated at the same time.
3, establish and improve the responsibility system for production safety. The safety production management system must be vertical from the project manager to the project implementation to the production workers (including temporary migrant workers), and no link should be missed; Everyone is responsible for the safe production responsibility system of all functional departments and personnel. The project manager is the first person in charge of production safety. The safety organization set up at the site shall be equipped with safety officers according to 1% ~ 3% of the construction personnel, and be fully responsible for the safety protection and accident prevention of all employees. Security personnel have the right to issue instructions according to relevant regulations and take protective measures to prevent accidents.
4. Party B shall take all reasonable preventive measures at any time to prevent its employees from any illegal, illegal, violent or disturbing public order.
5. Party B must hold the safety production certificate issued by the labor safety management department. Personnel participating in the construction must receive safety technology education, be familiar with and abide by various safety technology operating procedures of this type of work, and conduct regular safety technology assessment. Only those who have passed the exam can be allowed to operate at their posts. Personnel engaged in electrical, lifting, construction and installation, boilers, pressure vessels, welding, motor vehicle and boat driving, blasting, diving, gas inspection and other special types of work. After professional training and obtaining the Safety Operation Certificate, it is not allowed to work with certificates. The project manager must bear the management responsibility for the unlicensed operation of special operations on the construction site.
6. In addition to special custody, inflammable and explosive materials should also be equipped with adequate fire-fighting facilities, and all construction personnel should be familiar with the performance and use of fire-fighting equipment; Party B shall not give, exchange or otherwise transfer any kind of explosives to any other person, and shall not allow or tolerate the same behavior mentioned above.
7, the operator mount guard, must wear protective equipment in accordance with the provisions. The person in charge of construction and the safety inspector shall check the wearing condition of labor protection articles from time to time, and those who do not wear protective articles according to the regulations shall not take up their posts.
8, all construction machinery and equipment and aerial work equipment should be regularly checked, and have the signature record of the security officer, to ensure that it is always in good condition; It is forbidden to use unqualified machines, equipment and labor protection articles.
9. When new technologies, new processes, new equipment and new materials are adopted in the construction, corresponding safety technical measures must be formulated, and relevant safety signs must be provided on the construction site.
10. Party B must make emergency rescue plans for production safety accidents during the implementation of this project according to the characteristics of this project; In case of safety accidents, it is necessary to report to the relevant departments in a timely manner in accordance with the "Provisions of the State Council on the Investigation of Administrative Responsibility for Serious Safety Accidents" and other relevant regulations, adhere to the principle of "three noes" and severely deal with the relevant responsible persons.
Third, the liability for breach of contract
If a safety accident is caused by Party A or Party B's breach of contract, the responsibility will be investigated according to law.
The original of this contract is in duplicate, with each party holding one copy. This contract shall come into effect after being signed and sealed by the legal representatives of both parties or their authorized agents, and shall become invalid after all projects are completed and accepted.
Party A: Party B:
Legal representative or legal representative or its authorized agent:
;