Preparation materials:

Operating steps: rubber stamp, ink stamp, transfer paper and pencil.

1, to start, first create a design and draw a simple cat in the tutorial. Because it is to be transferred to the rubber stamp, it must be drawn in pencil. Secondly, the pattern does not need to be painted backwards.

2, transfer to the rubber block, pay attention to this process, can't move, otherwise the pattern will be blurred.

3. The mode has been successfully transmitted.

4. Instead of carving knife for rubber stamp, use art knife, but OLFA knife is very sharp and easy to use.

5. Just missed a blade.

6. Cut the rubber with a fast-moving pattern.

7. Draw a line at an angle of 45 degrees. This is the key angle of carving. It can be an angle of 45 degrees or less, but it should not exceed it.

8, and then the same angle and depth, reverse carving.

9. From another perspective, the carved rubber block is a V-shape.

10. The line outline is also carved in the same way.

1 1, and then carve out the extra parts outside.

12, and then start carving the kitten's body parts.

13. Remove all unnecessary parts.

14. Start trial printing after completion. If there are any defects, they can be improved.