There is a lot of blue screen information and cannot be fully explained in one article. However, their causes are often concentrated in incompatible hardware and drivers, problematic software, viruses, etc., so first of all, we provide Some common solutions have been provided. When encountering a blue screen error, you should first check these solutions to eliminate them.
1. Restart
Sometimes it is just a program or driver that makes a mistake temporarily. After restarting, they will correct their mistakes. (Note: Please refer to 7. Query the shutdown code at this time)
2. New hardware
First of all, you should check whether the new hardware is firmly inserted. This is Problems that many people ignore often cause many inexplicable failures. If it is confirmed that there is no problem, unplug it, try another slot, and install the latest driver. You should also check the hardware against the hardware compatibility category on the Microsoft website Is it compatible with the operating system? If your hardware is not in the list, check the hardware manufacturer's website or call their consultation hotline.
3. New drivers and new services
If you have just installed a new driver for a certain hardware, or installed a certain software, and it has added corresponding items to the system services (such as anti-virus software, CPU cooling software, firewall software, etc.), after restarting or using If a blue screen failure occurs in Windows, please go to safe mode to uninstall or disable them.
4. Check for viruses
Viruses such as shock wave and oscillation wave sometimes cause Windows blue screen of death, so check Antivirus is essential. At the same time, some Trojans and spyware can also cause blue screens, so it is best to use relevant tools to scan and check.
5. Check BIOS and hardware compatibility
For Newly installed computers often have blue screen problems. You should check and upgrade the BIOS to the latest version, and turn off memory-related items, such as caching and mapping. In addition, you should check your own hardware against Microsoft's hardware compatibility list. Also, if The inability of the motherboard BIOS to support large-capacity hard drives will also cause a blue screen, which needs to be upgraded.
6. Run "sfc /scannow" to check whether the system files have been replaced, and then use the system installation disk to restore.
Tips:
BIOS cache and mapping items
Video BIOS Shadowing (video BIOS mapping)
Shadowing address ranges (mapping address column)
System BIOS Cacheable (system BIOS buffer)
Video BIOS Cacheable (video BIOS buffer)
Video RAM Cacheable (video memory buffer)
7. Check the system log
In the Start--gt; menu, enter: EventVwr.msc, press Enter to display the "Event Viewer", pay attention to check the "System Log" and "Application" Items indicating "error" in "Program Log".
8. Query the shutdown code
Write down the dense E-texts in the blue screen, then go to other computers to access the Internet, and enter Microsoft Help Contact the support website?, enter the shutdown code in "Search (Knowledge Base)" in the upper left corner. If the search results do not find suitable information, you can select "English Knowledge Base" and search again. Under normal circumstances, you will find useful solutions here. Case. In addition, using the blue screen stop code or the following explanatory text as a keyword search in search engines such as Baidu and Google will often yield results.
9. Last Known Good Configuration
Under normal circumstances, the blue screen occurs after the hardware driver or new hardware is added and the driver is installed. At this time, the "Last Known Good Configuration" provided by Windows 2K/XP is A shortcut to solve the blue screen. Restart the system, press the F8 key when the boot menu appears, the advanced boot options menu will appear, and then select "Last Known Good Configuration".
10. Install the latest system patches and Service Pack
Some blue screens are caused by defects in Windows itself, which can be solved by installing the latest system patches and service packs.
Blue screen code meanings and solutions
It is common for a blue screen to appear when using Windows, and the system is often reinstalled because the source of the error is not clear, which is time-consuming and laborious. The following has collected some Windows crash passwords for your reference.
1. 0x0000000A: IRQL_NOT_LESS_OR_EQUAL
◆Error analysis: Mainly caused by problematic drivers, defective or incompatible hardware and software. From a technical point of view, it indicates that In kernel mode, a level process requests (IRQL) to access a memory address that it does not have permission to access.
◇Solution: Please try solutions 2, 3, 5, 8, and 9 in the previously introduced solutions. Exclude.
2. 0x00000012: TRAP_CAUSE_UNKNOWN
◆Error analysis: If you encounter this error message, unfortunately, the result of KeBudCheck analysis should be the cause of the error
Unknown.
◇Solution: Since Microsoft can’t help, you have to rely on yourself. Please carefully recall when this error occurred; what did you do to the system when it first occurred? Which operations; what operations were in progress when it occurred. Find out the possible causes from this information, and then select the corresponding solutions to try to eliminate them.
3. 0x0000001A: MEMORY_MANAGEMENT
◆Error analysis : This memory management error is often caused by hardware, such as: newly installed hardware, problems with the memory itself, etc.
◇Solution: If it occurs when installing Windows, it may be due to your The computer cannot meet the minimum memory and disk requirements for installing Windows.
4. 0x0000001E: KMODE_EXCEPTION_NOT_HANDLED
◆Error analysis: The Windows kernel detects an illegal or unknown process instruction, and this shutdown The code is usually caused by problematic memory or similar reasons to the previous 0x0000000A.
◇Solution:
(1) There is a problem with hardware compatibility: please check the previously mentioned Check the latest hardware compatibility list to see if all hardware is included in the list.
(2) Problematic device drivers, system services or memory conflicts and interrupt conflicts: If the driver appears in the blue screen message In the name of Rename or delete the file.
(3) If the error message clearly states Win32K.sys: It is most likely caused by third-party remote control software. You need to delete the software from the recovery console. The service is shut down.
(4) Appears when restarting for the first time after installing Windows: The most likely cause is insufficient disk space in the system partition or BIOS compatibility issues.
(5) If it occurs when closing a certain software: It is very likely that the software itself has a design flaw, please upgrade or uninstall it.
5. 0x00000023: FAT_FILE_SYSTEM
0x00000024: NTFS_FILE_SYSTEM
◆Error analysis: 0x00000023 usually occurs when reading and writing the system partition of the FAT16 or FAT32 file system, while 0x00000024 is due to an error in the NTFS.sys file (the function of this driver file is to allow the system to read and write .(NTFS file system disk). These two blue screen errors are most likely caused by physical damage to the disk itself, or damage to the interrupt request packet (IRP). Other reasons include: too many hard disk fragments; file reading Write operations are too frequent, and the amount of data is very large or due to some disk mirroring
Caused by software or anti-virus software.
◇Solution:
Step 1: First open the command line prompt and run "Chkdsk /r" (Note: It is not CHKDISK, it feels like This, but they refer to different contents) command to check and repair hard disk errors. If bad tracks are reported, please use the check tool provided by the hard disk manufacturer to check and repair.
Step 2: Then disable all software that scans files, such as anti-virus software, firewalls or backup tools.
Step 3: Right-click the C:\winnt\system32\drivers\fastfat.sys file and Select "Properties" to check whether its version is consistent with the Windows version used by the current system. (Note: If it is XP, it should be C:\windows\system32\drivers\fastfat.sys)
Chapter Step 4: Install the latest motherboard driver, especially IDE driver. If your optical drive and removable storage also provide drivers, it is best to upgrade them to the latest version.
6. 0x00000027: RDR_FILE_SYSTEM
◆Error analysis: The cause of this error is difficult to determine, but a problem with Windows memory management is likely to cause this stop code to appear.
◇Solution: If it is memory For management reasons, usually increasing the memory will solve the problem.
7. 0x0000002EATA_BUS_ERROR
◆Error analysis: System memory parity error occurs, usually due to defective memory (including It is caused by the device driver accessing a non-existent memory address when the physical memory, second-level cache or graphics card memory). In addition, the hard disk is damaged by viruses or other problems, so this stop code appears.
◇ Solution:
(1) Check for viruses
(2) Use the "chkdsk /r" command to check all disk partitions.
(3) Use Memtest86, etc. Memory test software checks the memory.
(4) Check whether the hardware is installed correctly, such as whether it is firm and whether the gold finger is stained.
8. 0x00000035: NO_MORE_IRP_STACK_LOCATIONS
◆Error analysis: Literally understood, it should be a stack problem with the driver or some software. In fact, the real cause of this failure should be a problem with the driver itself, or a quality problem with the memory.
◇Solution: Please use the driver and memory-related solutions in the conventional solutions introduced earlier to troubleshoot.
9. 0x0000003F: NO_MORE_SYSTEM_PTES
◆Error analysis: one Errors related to system memory management, such as: memory management problems due to performing a large number of input/output operations: defective drivers incorrectly use memory resources; an application (such as: backup software) is allocated A large amount of kernel memory, etc.
◇Solution: Uninstall all newly installed software (especially those that enhance disk performance and anti-virus software) and drivers.
10 , 0x00000044: MULTIPLE_IRP_COMPLIETE_REQUESTS
◆Error analysis: usually caused by hardware drivers.
◇Solution: Uninstall the recently installed driver. This fault rarely occurs, and it has been What I know is that when using www.in-sys
tem.com/Some software from this company will appear, and the culprit is the Falstaff.sys file. (The author is not afraid of lawsuits, so he will publish the company's website address)
11. 0x00000050: PAGE_FAULT_IN_NONPAGED AREA
◆Error analysis: problematic memory (including physical memory, second-level cache, video memory), incompatible software (mainly remote control and anti-virus software), damaged NTFS volumes and problematic hardware (For example: the PCI card itself is damaged), etc. will cause this error.
◇Solution: Please use the solutions related to memory, software, hardware, hard disk, etc. in the conventional solutions introduced earlier to eliminate them. .
12. 0x00000051: REGISTRY_ERROR
◆Error analysis: This stop code indicates that there is an error in the registry or system configuration manager. Because the hard disk itself is physically damaged or there is a problem with the file system, This causes input/output errors when reading the registration file.
◇Solution: Use "chkdsk /r" to check and repair disk errors.
13. 0x00000058: FTDISK_INTERNAL_ERROR
◆Error analysis: It means that an error occurred in the main driver of the fault-tolerant set. ?
◇Solution: First try to restart the computer to see if the problem can be solved. If not, try "last time" Correct configuration" to solve.
14. 0x0000005E: CRITICAL_SERVICE_FAILED
◆Error analysis: caused by the startup identification of a very important system service.
◇Solution Solution: If a new piece of hardware is installed and a new piece of hardware is installed, you can first remove the piece of hardware and check whether it is compatible with Windows 2K/XP through an online list. Then start the computer. If the blue screen still appears, please use the "Final" "Correct configuration once" to start Windows. If it still fails, it is recommended to perform a repair installation or reinstall.
15. 0x0000006F: SESSION3_INITIALIZATION-FAILED
◆Error analysis: This error is usually Appears when Windows starts, usually caused by problematic drivers or damaged system files.
◇Solution: It is recommended to use the Windows installation CD to repair and install the system.
16. 0x00000076ROCESS_HAS_LOCKED_PAGES
◆Error analysis: Usually it is because a driver did not correctly release the occupied memory after completing an input/output operation
◇Solution:
Step 1: Click Start --gt; run: regedt32, find [HKLM\SYSTEM\Currentcontrol set\control\session manager\memory management], and create a new double-byte value "TrackLockedPages" on the right , the value is 1. In this way, Windows will track which driver is the problem when the error occurs again. Step 2: If the blue screen appears again, the error message will become: STOP: 0x0000000CB (0xY, 0xY, 0xY, 0xY )DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS The fourth "0xY" will be displayed as the name of the problem driver, then update or delete it. Step 3: Enter the registry and delete the added "TrackLoc
kedPages".
17. 0x00000077: KERNEL_STACK_INPAGE_ERROR
◆Error analysis: It means that the kernel data that needs to be used is not found in virtual memory or physical memory. This error is often caused by a disk problem. The corresponding data is damaged or eroded by viruses.
◇Solution: Use anti-virus software to scan the system; use the "chkdsk /r" command to check and repair disk errors. If not, use the tools provided by the disk manufacturer to check and repair.
18. 0x0000007A: KERNEL_DATA_INPAGE_ERROR
◆Error analysis: This error is often caused by the inability of the kernel data in the virtual memory to be read into the memory. The reason may be that there is a bad file in the virtual memory page file. Cluster virus, disk controller error, memory problem.
◇Solution: First use anti-virus software upgraded to the latest virus database to check for viruses. If there are 0xC000009C or 0xC000016A codes in the information, it means it is bad. It is caused by the cluster, and the system's disk detection tool cannot automatically repair it. At this time, you need to enter the "Failure Recovery Console" and use the "chkdsk /r" command to perform manual repair.
19. 0x0000007B: INACESIBLE_BOOT_DEVICE
p>
◆Error analysis: Windows cannot access the system partition or boot volume during the startup process. This usually occurs during the first startup after replacing the motherboard, mainly because the IDE controllers of the new motherboard and the old motherboard use different chips. Sometimes it may be caused by a virus or hard disk damage.
◇Solution: Generally, just start the computer with the installation CD and then perform a repair installation to solve the problem. For viruses, you can use DOS Use a version of anti-virus software to check and kill (kv2005DOS version is available for download). If there is a problem with the hard disk itself, please install it on another computer, and then use "chkdsk /r" to check and repair disk errors.
20. 0x0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
◆Error analysis: The system process generates an error, but the Windows error handler cannot catch it. There are many reasons for it, including: hardware compatibility, problematic drivers or system services, Or some software.
◇Solution: Please use the "Event Viewer" to get more information and discover the source of the error. (Discovering does not seem to be the solution. It seems that everyone has to be self-reliant here. !)
21. 0x0000007F: UNEXPECTED_KERNEL_MOED_TRAP
◆Error analysis: It is usually caused by problematic hardware (such as memory) or certain software. Sometimes overclocking will also produce this Error.
◇Solution: Use detection software (for example: Memtest86) to check the memory. If overclocking is performed, please cancel the overclocking. Unplug the PCI hardware card from the motherboard slot, or replace the slot. In addition, after some motherboards (such as nForce2 motherboards) are overclocked, the Southbridge chip will overheat and cause a blue screen. At this time, adding a separate heat sink for the chip can often effectively solve the problem.
22. 0x00000080: NMI_HARDWARE_FAILURE
◆Error analysis: It is usually caused by hardware. (It seems that blue screen is closely related to hardware errors)
◇Solution: If new hardware has been installed recently, please Remove it, then try changing the slot and installing the latest driver. If you upgraded the driver, please restore the original version;
Check whether the memory gold finger is contaminated or damaged; scan for viruses; run "chkdsk /r" to check and repair disk errors; check that all hardware cards are inserted securely. If the above attempts are ineffective, you must seek help from a professional computer repair company Helped.
23. 0x0000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED
◆Error analysis: The kernel-level application generated an error, but the Windows error handler did not catch it. It is usually a hardware compatibility error.
◇Solution: Upgrade the driver or upgrade BIOS.
24. 0x0000009C: MACHINE_CHECK_EXCEPTION
◆Error analysis: Usually caused by hardware. Usually due to overclocking Or there is a problem with the hardware (memory, CPU, bus, power supply).
◇Solution: If overclocking is performed, please lower the original frequency of the CPU and check the hardware.
p>
25. 0x0000009FRIVER_POWER_STATE_FAILURE
◆Error analysis: often related to power supply, often occurs in power-related operations, such as: shutdown, standby or sleep.
◇Solution: Reinstall the system. If the problem cannot be solved, please replace the power supply.
26. 0x000000A5: ACPI_BIOS_ERROR
◆Error analysis: Usually it is because the motherboard BIOS cannot fully support the ACPI specification.
◇Solution: If there is no corresponding BIOS upgrade, when installing Windows 2K/XP, when the "press F6 if you need to install a third-party SCSI or RAID driver" prompt appears, press Press the F7 key so that Windows will automatically disable the installation of ACPI HAL and install the Standard PC HAL.
27. 0x000000B4: VIDEO_DRIVER_INIT_FAILURE
◆Error analysis: This stop message indicates that Windows cannot Start the graphics card driver, so that you cannot enter the graphical interface. It is usually a problem with the graphics card, or there is a hardware conflict with the graphics card (such as a conflict with the parallel or serial port).
◇Solution: Enter safe mode Check whether the problem is solved. If possible, please upgrade the latest graphics card driver. If it still does not work, it is likely that there is a conflict between the graphics card and the parallel port. You need to press the WIN break key combination to open "System Properties" in safe mode. In Hardware- -gt; Find and double-click the option to connect to the LPT1 port for printing in the Device Manager, uncheck "Use automatic configuration" in the "Resources" tab, and then change "03BC" in "Input/Output Range" to " 0378".
28. 0x000000BE: ATTEMPTED_WRITE_TO_READONLY_MEMORY
◆Error analysis: Caused by a driver trying to write data to read-only memory. It is usually caused by installing a new driver. , after system service or upgrading the device's firmware program.
◇Solution: If the error message contains the driver or service file name, please uninstall the newly installed driver or software based on this information Or disabled.
29. 0x000000C2: BAD_POOL_CALLER
◆Error analysis: A kernel-level process or driver incorrectly attempts to enter memory
Operation. It is usually caused by drivers or buggy software.
◇Solution: Please refer to the related items related to the general solutions introduced earlier for troubleshooting.
30. 0x000000CERIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS
p>
◆Error analysis: Usually caused by problematic drivers or system services.
◇Solution: Please refer to the general solution-related items introduced earlier for troubleshooting.
31. 0x000000D1RIVER_IRQL_NOT_LESS_OR_EQUAL
◆Error analysis: usually caused by a problematic driver (for example, the Logitech MouseWare 9.10 and 9.24 drivers for Logitech mice will cause this fault). At the same time, there are Defective memory, damaged virtual memory files, certain software (such as multimedia software, anti-virus software, backup software, DVD playback software), etc. can also cause this error.
◇Solution: Check the latest installation or Upgraded drivers (if "acpi.sys" or similar file names appear in the blue screen, it is very certain that it is a driver problem) and software; test whether there is a problem with the memory; enter the "Recovery Console" and go to the virtual memory page file In the partition where Pagefile.sys is located, execute the "del pagefile.sys" command to delete the page file; then execute the "chkdsk /r" command in the partition where the page file is located; reset the virtual memory after entering Windows. If you encounter this blue screen when surfing the Internet , and you are downloading and uploading a large amount of data (such as online games, BT downloads), then it should be a problem with the network card driver, and you need to upgrade its driver.
32. 0x000000EA: THREAD_STUCK_IN_DEVICE_DRIVER
◆Error analysis: usually caused by the graphics card or graphics card driver.
◇Solution: Upgrade the latest graphics card driver first. If not, you need to replace the graphics card to test whether the fault persists. Occurred.
33. 0x000000ED: UNMOUNTABLE_BOOT_VOLUME
◆Error analysis: It is usually caused by disk errors. Sometimes it is also recommended to check whether the hard disk connection is in poor contact or is not used properly. The connection cable of this hard drive transmission specification, for example, ATA-100 still uses ATA-33 connection cable, which does not matter for low-speed hard drives, but the requirements for high-end hard drives (supporting ATA-66 or above) are stricter, and connections with incorrect specifications can sometimes cause This type of failure is unable to boot. If this error still occurs frequently after repair, it may be a precursor to hard disk damage.
◇Solution: Under normal circumstances, restarting will solve the problem, no matter what It is recommended to execute the "chkdsk /r" command to check and repair the hard disk
34. 0x000000F2: HARDWARE)INTERRUPT_STORM
◆Error analysis: The kernel layer detects an interrupt storm in the system, for example: a certain A device does not release the occupied interrupt after completing the operation. This is usually caused by a defective driver.
◇Solution: Upgrade or uninstall the latest installed hardware driver.
35. 0x00000135: UNABLE_TO_LOCATE_DLL
◆Error analysis: It usually means that a file is missing or damaged, or there is an error in the registry.
◇Solution: If the file is missing or damaged, in the blue screen message
The corresponding file name is usually displayed. You can find the corresponding file through the network or other computers, and copy it to the SYSTEM32 subfolder under the system folder. If the file name is not displayed, it is most likely registered. The table is damaged, please use system restore or previous registry backup to restore.
36. 0x0000021A: STATUS_SYSTEM_PROCESS_TERMINATED
◆Error analysis: User mode subsystem, such as Winlogon or customer service service The runtime subsystem (CSRSS) is damaged, so security can no longer be guaranteed, causing the system to fail to boot. Sometimes, when system administrators mistakenly modify user account permissions, they cannot access system files and folders.
◇Solution: Use "last known correct configuration". If it is invalid, you can use the installation CD to repair the installation.
37. STOP 0xC0000221 or STATUS_IMAGE_CHECKSUM_MISMATCH
◆Error analysis : Usually caused by driver or system DLL file damage. Generally, the file name will appear in the blue screen
◇Solution:
(1) Use the Windows installation CD for repair installation;
(2) If you can still enter safe mode, you can "Start --> Run": sfc /scannow
(3 ) can also be solved by extracting files. Enter the "Recovery Console" and use the copy or expand command to copy or decompress the damaged files from the CD. However, the blue screen is generally a driver file problem, so the expand command I will use some, for example: the blue screen prompts the tdi.sys file, because the driver file is usually in the i386\driver compressed package, so use: expand CDROM:\i386\driver.cab \f:tdi.sys c:\winnt \system\drivers.(xp is expand CDROM:\i386\driver.cab \f:tdi.sys c:\winddowns\system\drivers)
38. If these blue screen stop codes appear during startup
If a blue screen appears when Windows starts, and the error message in Appendix 1 appears, then there is most likely a problem with the hardware. Please use the diagnostic tool provided by the hardware manufacturer to determine whether there is a problem with the hardware, and go to other places. Check the website to see if there is the latest BIOS or firmware update program. If there is no problem with the hardware, reinstall Windows 2000 ~ Blue screen
Windows XP has a shutdown bug. If your computer often displays a blue screen during shutdown, and the failure is intermittent, there will be no response when pressing the "Ctrl Alt Delete" key. , then it is certain that your system has not been patched accordingly. Please download the SP1 patch package and patch it, and it will usually be fine.
2. The sound card driver causes a blue screen during shutdown
If you are using an innovative sound card and a blue screen appears during the shutdown process, and the error code is "0X0000000A", then please enter the device management remove the sound card, refresh it, and manually install the latest driver with a digital signature.
3. The Logitech mouse and keyboard are not perfect, resulting in a blue screen when shutting down
If you are using a Logitech network keyboard and have installed the Key Commander software to drive the corresponding network functions of the keyboard, then It may cause a shutdown to turn into a restart failure. If the driver of your Logitech mouse is MouseWare8.6, it will cause a blue screen failure during shutdown. You can only solve the problem by uninstalling the driver. gt; gt; Blue screen code 0x000000D1
4. Windows XP SP2 vulnerability blue screen
This vulnerability was reported in December 2004, and it affects both Windows Server 2003 and Windows XP Tablet PC Edition 2005. In some cases, when installing third-party antivirus software or firewalls, Windows cannot specify the title of the manufacturer or packager, resulting in a "Stop 0x05 (INVALID_PROCESS_ATTACH_ATTEMPT)" error and causing the OS to enter a blue screen state. Downloading Microsoft patches can solve the problem.
Blue screen caused by poor heat dissipation in the Northbridge
Crashes: A computer in use has crashed frequently recently. At first I thought I was infected with a virus, but after checking, no virus was found. It is also thought that too many hard disk fragments are causing system instability. But defragmenting the hard drive still didn't solve the problem. In desperation, I formatted the system disk and reinstalled the system, but the problem was still not solved, seriously affecting daily work.
Crash analysis: The fault was not eliminated after reinstalling the system. It seems that there is a hardware problem. I first suspected a memory failure. However, the problem was still not solved after replacing the memory module. So where does the problem come from? After careful analysis, since there is no problem with the memory, the motherboard is most likely to be faulty.
So I used the replacement method. After replacing the motherboard, I turned on the computer for testing. The fault disappeared. It seemed that the root of the problem was on this motherboard. This is a no-name 865PE chipset motherboard. The materials and workmanship of the motherboard are quite average. After careful inspection, it was found that there was no breakdown of the capacitor on the motherboard, and there were no burn marks on the entire PCB. So which part of the motherboard had the problem? So I cleaned the motherboard again and put it into the computer again to connect to various devices. Half an hour after booting, the computer crashed again. At this time, I touched the heat sink on the north bridge chip of the motherboard and found that it was very hot. It seemed that the problem occurred there.
So I bought a radiator with a fan. After some fiddling, I finally replaced it and installed the replaced Northbridge heatsink on the Southbridge chip. (The Southbridge chip of the off-brand motherboard is completely exposed without any heat sink installed.) After some testing at the beginning, the fault was completely eliminated. After careful analysis, the cause of the fault was understood. It turns out that the machine was installed in winter, and the lower temperature did not have much impact. Then the problem was exposed after summer.
Problem summary: When this kind of problem occurs, usually the memory module will be considered first. However, frequent crashes may occur due to problems with the motherboard Cache or poor heat dissipation in the motherboard design. The author once found this fault on a certain brand of 845PE motherboard due to insufficient heat dissipation of the motherboard. After the computer crashed, I touched the motherboard components around the CPU and found that they were very hot and hot to the touch. After replacing the high-power fan, the crash problem was solved. For problems with the Cache, you can enter the CMOS setting program and disable the Cache to successfully solve the problem. Of course, the speed will definitely be affected after the Cache is disabled.
Solution to blue screen when installing XP SP3 on some computers
XP SP3 has been released for a long time, but if you plan to install XP SP3 on an HP/Compaq computer with AMD CPU, be careful. Blue screen of death (BSoD), however, the solution seems to be to keep restarting.
HP recently announced a solution. It is very simple. Just change a file name. In short, it is 4 steps:
1. When starting the computer, press F8 key to enter safe mode;
2. Find this location: C:\Windows\System32\Drivers and locate the intelppm.sys file;
3. Rename it, such as :XXXintelppm.syx;
4. Restart.
Just take a look at the code when your computer has a blue screen and find the corresponding solution.