I downloaded Win7 online and wanted to reinstall the system, but I couldn’t get in after halfway through the installation and restarted.

The installation failed. I either need to buy a CD and reinstall it, or go to Use the USB system tool on other computers to create a USB PE system for installation. If that doesn't work, you can only ask a computer repairman to install it for you! Missing operating syetem is displayed after the win7 system is restarted halfway through refilling

The file is broken, change the CD, or directly install it from the hard disk with PE (need to download the ghost system package), it is quick and easy to seek emergency help : I downloaded a shadow system installation from the Internet, but what should I do if I can’t enter the system after restarting?

Press F8 in safe mode and see if it doesn’t work. Use the GHOST CD to bring the PE in and see if the computer can’t enter the system. Reinstall the system. You can also install and restart it but still can’t enter.

Why does the computer repeatedly Can't restart the desktop normally or crashes with a blue screen? (5819 original reply, welcome to copy)

In the case of excluding viruses, it is usually because the GHOST version or other modified versions of the operating system are installed. Because a large number of programs that are not suitable for your hardware device have been integrated in advance, the system cannot correctly identify and load the hardware device necessary for the system. (5819 original reply, welcome to copy)

And then there is It is caused by the existence of software with duplicate functions in the system that causes conflicts (such as the installation of 2 or more anti-virus software and firewalls, advertising blocking). (5819 original reply, welcome to copy)

Reprint the original version The image installation version of the operating system can correct such errors. (5819 original reply, welcome to copy)

If you don’t want to reinstall, try uninstalling the device with the incompatible driver installed, and the device will automatically hard drive when booting. After installing the device, reinstall the driver you downloaded (WHQL) that can pass Microsoft digital signature certification, and then restart the computer again to see if there is any improvement. (5819 original reply, welcome to copy)

If confirmed If it is not a system or software problem, you need to test the hardware in the following order. First, the memory is most likely, then the CPU, then the hard disk, and finally the graphics card. The motherboard will basically not have a blue screen. (5819 original reply, welcome to copy)

In addition, you need to check whether poor heat dissipation is causing the machine to overheat (if so, you must install a more powerful radiator, recoat thermal silicone grease, and replace a powerful fan).( 5819 original reply, welcome to copy)

Check whether the top of the motherboard capacitor is bulging (if so, it must be replaced immediately). (5819 original reply, welcome to copy)

Still needed Check whether the chassis power supply is insufficient, causing the output voltage to be unstable (if so, it must be replaced immediately) (5819 original reply, welcome to copy)

Friendly reminder: As long as the driver can be used, do not blindly chase new ones. Otherwise, installing an incompatible driver will cause unstable system execution and frequent blue screen crashes. (5819 original reply, welcome to copy) I downloaded a win7 online, but it won't install!

The installation of win7 is very simple. Just load the iso file you downloaded, then enter it and click setup. Or use a USB flash drive to make a boot disk. This is safer. I will tell you how.

Ultraiso to boot from U disk

Hello, you can try U disk installation. The operation is actually very simple. First, you need to install the ultraiso software, and then right-click to execute as administrator. , import the files in the Windows 7 installation CD into the software. The method is: File-->Open and select the win7 image you downloaded, then select Start, select Write to the hard disk image, adjust the method to zip+ and select Easy Start-->Easy Writing Note: Please transfer important data to other peripherals or local disks before writing, because the USB disk will be automatically formatted before writing. Then turn on the computer and press F12 to set it to USB boot. I hope my answer can help you!

I downloaded a win7 operating system from the Internet, but I can’t install it.

ISO file, you can install it like this: first check whether your system disk is a system installation disk or a system clone installation disk; because the installation of the former is more complicated and takes longer than the installation of the latter. The latter is simple and short in time.

Before installation, first burn the downloaded system iso file to a disc, and set the computer to start as a CD drive (start the computer, press the DEL key continuously to enter CMOS for settings, press F10 to save), and put the system installation disk into the disc Start the computer, enter the CD boot menu, if it is a system installation disk, follow the prompts to complete the step by step; it will take about 30 minutes, and then you need to install various drivers; if it is a system clone installation disk, enter the CD boot menu, Select the first option, install the p>

It is undoubtedly very dangerous if you are in the GHOST interface. If you start to install the system, the damage to the hardware will be almost the same as a normal power outage. Can I reinstall the system after downloading WIN7 from the Internet to the D drive?

U disk installation system operation steps:

1. First, make the U disk into a U Deepin U disk boot disk , restart the computer and wait for the startup screen to appear. Press the startup shortcut key, select the USB disk to boot and enter the udeepin main menu. Select the "03Udeepin Win2003PE Classic Edition (Old Machine)" option, and press the Enter key to confirm.

2. After entering the win8PE system, the installation tool will pop up on its own. Click "Browse" to select the win7 system image file and save it to the USB disk.

3. Wait for the udeepinpe installation tool to automatically load the win7 system image package installation file. Just select the installation disk location and click the "OK" button.

4. Click the "OK" button directly in the pop-up prompt window.

5. The installation tool will then start working, please wait patiently for a few minutes.

6. After completion, a prompt to restart the computer will pop up, click the "Yes (Y)" button.

7. At this time, you can remove the USB disk and restart the system to start the installation. No operation is required. Just wait for the installation to complete. It will restart again before entering the system desktop. My laptop got stuck halfway through installing the system. I restarted it and then I couldn’t enter PE. Safe mode

1. First, make the USB disk into a U-deep USB boot disk, restart the computer and wait for it to appear. Press the startup shortcut key on the startup screen, select the USB disk to boot, enter the u Deepin main menu, select the "04u Deepin Win2003PE Classic Edition (Old Machine)" option, and press the Enter key to confirm.

2. After entering the win8PE system, the installation tool will pop up on its own. Click "Browse" to select the win7 system image file and save it to the USB disk.

3. Wait for the udeepinpe installation tool to automatically load the win7 system image package installation file. Just select the installation disk location and click the "OK" button.

4. Click the "OK" button directly in the pop-up prompt window.

5. The installation tool will then start working, please wait patiently for a few minutes.

6. After completion, a prompt to restart the computer will pop up, click the "Yes (Y)" button.

7. At this time, you can remove the USB disk and restart the system to start the installation. No operation is required. Just wait for the installation to complete. It will restart again before entering the system desktop.

I used a USB flash drive to install the system, but I couldn’t install it after restarting halfway through the installation. What should I do?

What is the best prompt to explain whether you are using GHOST or a virtual disc... You can use PE again. Question in the installation bar when the system formats the C drive: Using GHOST, I can’t enter the desktop now, and I can’t continue until I get to where there are many numbers after the boot memory. Answer: You set the BOIS USB disk to be the first boot and then restart. Enter the PE system, format the system disk and then re-install GOHST. After GOHST is completed, do not pull out the U disk. Are you a PE from Lao Maotao? When reading the U disk, you choose the first partition of the hard disk to start the system. Take a look: xp198./2009/0110/news_2NMDAwMDAwMDI2NA. These are the steps to install the system on a USB disk