Current location - Quotes Website - Signature design - Model factory cooperation agreement contract
Model factory cooperation agreement contract
A contract is an agreement between the parties or both parties to establish, change or terminate a civil relationship. Contracts established according to law are protected by law. The following "Model Factory Cooperation Agreement Contract" compiled by me is for your reference only, and I hope it will help you.

Model factory cooperation agreement contract (I) Party A: _ _ _ _ _ _ _ _

Party B: _ _ _ _ _ _ _

Party C: _ _ _ _ _ _ _

In accordance with relevant laws and regulations and on the principle of equality and mutual benefit, Party A, Party B and Party C * * jointly invest in _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Chapter I Cooperation Projects

Article 1:

1. The project jointly invested and operated by the three parties is located in _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ..

2. The cooperation contents of this project are as follows:

Party B and Party C agree that * * * will jointly contribute to the operation of _ _ _ _ _ _ _.

3. The term of this cooperation project is _ _ _ years, counting from the date of signing this contract.

Chapter II Capital Contribution and Profit and Loss Distribution

Article 2: The three parties confirm that the investment in the first phase of this project is RMB _ _ _ _ _ _ _ _ _ _ _, and Party B is responsible for the production and operation of _ _ _ _ _ _.

Article 3: The profit distribution mode of cooperative operation is as follows: Party A, Party B and Party C account for _ _ _%, _ _ _% and _ _ _ _% of the operating income of the factory respectively; If a loan is generated in the cooperative operation, the profit of the cooperative operation should be repaid first; The profit is distributed once a year, but _ _ _% is deducted from the profit as the follow-up development fund of the cooperation project.

The loss sharing method of cooperative operation is: _ _ _ _ _%, _ _ _ _% and _ _ _ _% of the funds generated by the losses borne by Party A, Party B and Party C respectively.

Chapter III Project Management

Article 4: Organizational structure of project management

After negotiation among the three parties, it is decided that Party B will manage the production on site with a monthly salary of RMB.

Article 5: The specific operation mode and system of the factory shall be jointly formulated by the three parties, which shall strictly abide by them.

Article 6: The three parties shall hold a meeting on _ _ _ _ every month to report information on operation, production and finance, and the corresponding plans and agreements formulated by all partners shall be binding on all partners. Under special circumstances, an interim meeting may be held with the consent of three partners.

Article 7 The following matters must be unanimously agreed by all partners:

1, investment scale or change of investment plan

2. Sign contracts with foreign countries

3. Transfer or lease the property operated by the project.

4, the project investment and cost more than _ _ _ ten thousand yuan.

If a partner exercises the above acts without the consent of the partner, causing economic losses to other partners, he shall be liable for compensation.

Article 8 When a partner transfers his capital contribution, he must obtain the consent of other partners. At the time of transfer, other partners enjoy the preemptive right. If it is transferred to a third party, the third party will treat it as a partner.

Chapter IV Entry and Exit of Cooperative Operation

Article 9 When a new partner joins a cooperative enterprise, it shall be unanimously agreed by all the partners and a written cooperation agreement shall be signed according to law.

Article 10 The new partner enjoys the same rights and assumes the same responsibilities as the original partner. The newly joined partners shall be jointly and severally liable for the debts of the cooperative operation before joining.

Article 11 If a partner withdraws his shares, he shall notify the other partners one month in advance, and only after all the partners agree unanimously can he withdraw his shares.

This agreement is made in triplicate, one for each party.

Party A: _ _ _ _ _ _ _ _ _

Party B: _ _ _ _ _ _ _ _ _

Party C: _ _ _ _ _ _ _ _ _

Signing time: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Model factory cooperation agreement (II) Party A: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

ID number: _ _ _ _ _ _ _

Address: _ _ _ _ _ _ _ _ _ _ _ _

Party B: _ _ _ _ _ _ _ _ _ _ _

ID number: _ _ _ _ _ _ _

Address: _ _ _ _ _ _ _ _ _ _ _ _

Based on the principles of voluntary cooperation, equality and friendship, * * investment, * * income, * * risk and * * income, Party A and Party B reached an agreement through consultation. Agree to jointly build _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

Article 1 The place of performance of this Agreement is _ _ _ _ _ _ _ _. The total investment of both parties is RMB yuan. The investment methods determined by both parties through consultation are as follows:

1. Party A is responsible for providing all civil works (including large kiln, ventilation, dry cave, railway, tile house, power distribution room, office, dormitory, etc.). ) The expenses required for this _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

2. Party A is responsible for providing power and water for the factory, negotiating and coordinating various local social relations, and ensuring that the normal production and operation of the factory are not subject to external illegal interference. The expenses required for this item shall be borne by both parties.

3. Party B is responsible for providing all production equipment and technologies required by _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Responsible for providing raw materials and working capital needed for the initial stage of the factory; Responsible for providing a loader, a transformer and all low-voltage equipment (including switchboard, cables, etc.). ) required for production; This investment of Party B is equivalent to _ _ _ _ _ _ _ _% of the total investment.

Article 2 Profit sharing and loss sharing

Both parties agree that Party A's obligations in item 1 of the last article will be fulfilled on _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Both parties agree that regardless of the term or expiration of this agreement, the property rights invested by each party shall still belong to each party, but the exercise of property rights shall not violate this agreement.

Investors shall share the profits of * * * and the losses of * * * in investment operation according to the proportion of their capital contribution to the total capital contribution.

The rights and interests formed by the investor's contribution and its fruits are the property of the investor * *, which is jointly owned by * * and the investor in proportion to their contribution.

After this is _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

Article 3 Business execution

1. Entrust Party B to perform daily affairs on behalf of investors;

2. Party A has the right to check the implementation of daily affairs, and Party B has the obligation to report the operating status and financial status of the investment to Party A;

3. Party A shall provide a financial accountant, a consignee or consignor, and Party B shall provide a cashier. Settle accounts daily and monthly, and provide investors with a financial statement to make the accounts clear. Other personnel shall be arranged by Party B. ..

4. The income generated by Party B's execution of the investment firm belongs to the investor, and the losses or civil liabilities generated shall be borne by the investor;

5. If Party B causes losses to other investors due to negligence or non-compliance with this agreement when performing affairs, it shall be liable for compensation.

6. Party A may object to Party B's execution of investment affairs. When raising an objection, the execution of the transaction shall be suspended. In case of dispute, it shall be decided by the investor.

7. The following matters must be agreed by Party A: (1) Transfer the investment of _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _; (2) The above rights and interests are very important to the quality of outbound; (3) Replace the management personnel provided by Party A. ..

8. In the production process, all the expenses arising from inevitable external factors shall be borne by both parties.

Article 4 When an investor transfers all or part of his capital contribution to a person other than the investor, he must obtain the consent of other investors. Under the same conditions, other investors have the priority to be transferred.

Article 5 Other rights and obligations

1. After the establishment of the factory, no investor may withdraw its capital contribution without authorization;

2. When the factory cannot be set up, the debts and expenses arising from the establishment shall be shared according to the investment proportion of each investor.

Article 6 Liability for breach of contract

If one party fails to perform this agreement, the breaching party shall pay _ _ _ _% of the total capital contribution to the other party as liquidated damages and compensate the other party for its economic losses.

Article 7 Both parties reach an agreement through consultation, and the term of cooperation between them is _ _ _ _ _. During the cooperation period, if the purpose of the contract cannot be achieved due to the adjustment of national policies, both parties shall terminate the contract through consultation; After the expiration of the cooperation, both parties shall negotiate separately according to the actual situation.

Article 8 Others

1. For matters not covered in this agreement, a supplementary agreement shall be signed separately.

2. This agreement shall come into force after the investor signs and seals it. This agreement is made in duplicate, with each investor holding one copy.

Party A: _ _ _ _ _ _ _ (signature and handprint)

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Party B: _ _ _ _ _ _ (sign and press the handprint)

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Model factory cooperation agreement (III) Party A: _ _ _ _ _ _ ID number: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Party B: _ _ _ _ _ ID number: _ _ _ _ _ _ _

Party C: _ _ _ _ _ ID number: _ _ _ _ _ _ _ _

Party D: _ _ _ _ _ ID number: _ _ _ _ _ _ _ _

At present, Party A, Party B, Party C and Party D have established a _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

I. Amount of contribution

_ _ _ _ _ Mode of contribution of Party A _ _ _ _ _ Date of contribution _ _ _ _ _

_ _ _ _ _ Mode of contribution of Party B _ _ _ _ _ Date of contribution _ _ _ _ _

Mode and time of contribution of Party C

Mode and date of contribution of Party D _ _ _ _ _ _ _ _

Second, the equity share and dividend distribution

The four parties agree that Party A holds% of the shares of the joint-stock company; Party B holds% of the shares; Party C holds% of the shares of the joint-stock company; Party D holds% of the shares of the joint-stock company (note: the actual contribution of Party D is RMB); Sifang has the right to distribute the company dividends according to the equity ratio of the above-mentioned joint-stock company, and the amount and proportion of the equity actually invested by Sifang shall not be used as the basis for dividend distribution. After the joint-stock company generates profits, Party A, Party B and Party D can withdraw their respective profits, of which Party A can get _ _%, Party B can get _ _%, Party C can get _ _%, Party D can get _ _% (according to the company's profits) and the rest can be retained as capital. If dividends are invested in the company as working capital, in order to increase the source of funds and expand market share, it must be agreed by the four parties and carried out by the four parties at the same time.

Three. Matters agreed during the cooperation period

1. Cooperation period:

The term of a partnership enterprise is _ _ _ _ _ _ _ _ _ _ years. If the company operates normally and the four parties have no intention to leave, the contract period will be automatically extended.

2. Joining, Withdrawing and Transfer of Capital Contribution

A. Occupation: ① This contract needs approval; (2) with the consent of the four parties; (3) to implement the rights and obligations stipulated in the contract.

B. Withdrawing from the partnership: ① The company shall not withdraw from the partnership in the normal operation; (2) If you insist on quitting the partnership, the settlement shall be made according to the property status at the time of quitting the partnership, and all contributions are in cash; ③ Withdraw according to 60% of the shares invested by the quitter; (4) Without the consent of the four parties, if one party is unwilling to continue the partnership, one party will be kicked out, and the kicked-out party will be compensated according to 60% of the company's current property status when it is forced to withdraw; (5) If the withdrawal of the partnership without the consent of the contractor causes losses to the partnership, it shall be compensated.

3. Transfer of capital contribution: Partners are allowed to transfer their own capital contribution. At the time of assignment, the partners have priority over the assignee. If a third party other than a partner is transferred, the third party will be regarded as a partner, otherwise the transferor will be regarded as a partner.

4. Termination and matters after termination.

The partnership is terminated for one of the following reasons: ① the partnership term expires; ② All partners agree to terminate the partnership; (3) The partnership enterprise has been established or cannot be established; (4) The partnership enterprise is revoked in violation of laws. The court decided to dissolve according to the request of the parties.

Matters after the termination of the partnership: ① Nominate liquidators immediately and invite _ _ _ _ _ _ _ _ _ intermediaries (or notaries) to participate in liquidation; (2) If there is surplus after liquidation, it shall be carried out in the order of collecting creditor's rights, paying off debts, returning capital contribution and distributing surplus property in proportion. Fixed assets and inseparable items can be sold to partners or third parties at a fixed price, and the price participates in the distribution; (3) In case of losses after liquidation, no matter how much the partners have contributed, the partnership property shall be used to pay off first, and the part of the partnership property that is insufficient to pay off shall be borne by the partners in proportion to their contributions.

5. Settlement of disputes

In case of disputes between the four parties, they should be settled through consultation on the principle of being conducive to the development of cooperative relations. If negotiation fails, you can go to court.

4. After the shareholders are established, they entrust _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

1, and the single payment exceeds RMB _ _ _ _ _ _ _ _;

2. Introduction of new products;

3. Major promotion activities;

4. Other important matters stipulated in the Articles of Association.

5. If the company needs to increase its capital in the future, Party A, Party B, Party D and Party B will jointly contribute, each accounting for _ _ _ _% of the total investment.

Six, after the normal operation of the company, the raw materials needed for production must be supplied separately by _ _ _ _.

Seven. Matters not covered in this agreement shall be settled by the four parties through consultation. This agreement is made in quintuplicate, each party holds one copy, and the witness keeps one copy for the record. It will come into effect after being signed by the four parties and confirmed by the official seal of the company.

Party A (signature): _ _ _ _ _ _

Party B (signature): _ _ _ _ _ _

Party C (signature): _ _ _ _ _ _

Party D (signature): _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Company seal for confirmation: _ _ _ _ _ _ _

Signature of the person in charge of the company for confirmation: _ _ _ _ _ _ _

Model factory cooperation agreement contract (IV) Party A: _ _ _ _ _ _ _ _ _ _ _ _

Party B: _ _ _ _ _ _ _

Party C: _ _ _ _ _ _ _

In line with the principles of equality, voluntariness, complementary advantages, mutual benefit and common development, and in accordance with the relevant provisions of the Contract Law, in order to clarify the rights and obligations of all parties, Party A, Party B and Party C have reached an agreement on _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

First, the specific situation of cooperative operation:

The cooperative factory is located in: _ _ _ _ _ _ _ _ _ _ _ _

Workshop area of the business premises: _ _ _ _ _ _ square meters

The main business scope is: _ _ _ _ _ _ _ _ _ _ _ _

Second, the way of cooperation:

1. Due to reasonable tax avoidance, the industrial and commercial license was established as a one-person company.

2. During the term of cooperation, all parties contribute capital, jointly operate, bear risks and make profits and losses.

3. Each party entrusts one party with full authority to manage the production affairs of the cooperative factory.

Three. Term of cooperation:

Temporary signature of _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _. After the expiration, if both parties agree to extend the term of cooperative operation, they may sign a cooperative factory building agreement separately.

Four. Mode of contribution:

The contribution ratio of Party A is _ _ _%, that is, RMB _ _ _ _ ten thousand Yuan only;

The contribution ratio of Party B is _ _ _ _%, that is, RMB _ _ _ _ ten thousand Yuan only;

The contribution ratio of Party C is _ _ _%, that is, RMB _ _ _ _ ten thousand Yuan only.

Verb (abbreviation for verb) Investment proportion and profit distribution:

1. All parties shall share the profits of * * * investment operation in proportion to their capital contribution, and * * * shall bear the losses of investment operation.

2. Both parties agree to use _ _ _ _ _ time to analyze the operation status of the cooperative factory.

3. The profit of the factory in _ _ _ _ _ _ _ can be distributed by all parties through consultation.

The profits of all parties can only be used for the expenses of the cooperative factory. If it is used for project investment, it can only be used with the consent of all parties.

5. After the expiration of the cooperation period, Party A shall not prevent Party B and Party C from obtaining the due profits for any reason. Upon the expiration of the cooperation, the shares shall be determined by the three parties through consultation.

6. During the cooperation period, neither party may withdraw funds for any reason, but it can transfer shares within the scope of the existing three shareholders.

7. Party A's shares account for _ _ _ _%, Party B's shares account for _ _ _% and Party C's shares account for _ _ _ _%.

Six, production plan:

Party A, Party B and Party C shall try their best to meet the production capacity of the cooperative factory. Only after the price is signed by Party A, Party B and Party C can the production quantity enter the financial account book.

Seven, cooperative factory management:

All parties confirm that the production affairs of the cooperative factory are managed by specific personnel designated by Party A, and all parties can understand and supervise the operation of the factory.

VIII. Transaction execution:

1. The equipment maintenance, repair and other daily expenses of the cooperative factory shall be borne by the cooperative factory.

2. The arrangement of planned orders should be based on the principle of maximizing profits, and specific decisions should be made through negotiation under special circumstances.

3. The cooperative factory shall pay social comprehensive insurance for its employees in a timely manner in accordance with relevant state regulations. Any safety accident shall be the responsibility of the factory responsible for daily management, and other parties shall not bear any responsibility. As long as the management factory participates in social comprehensive insurance for employees in time, any safety casualty accident will refer to the compensation rules of the insurance company, and the part that cannot be compensated will be borne by all parties.

4. Continue or expand the reinvestment of production, and adjust the profit distribution in the later period based on the principle of negotiated investment and the actual proportion of additional investment by all parties.

Nine. Liability for breach of contract:

If either party fails to perform this agreement, the breaching party shall pay punitive liquidated damages to the other party and compensate the other party for its economic losses.

X. termination of the contract:

1. If this agreement is not renewed after the specified termination date, this agreement will be automatically terminated.

2. All partners agree to terminate the partnership.

3. The partnership affairs are completed or cannot be completed.

4. It was revoked according to law.

5. Other reasons for the dissolution of the partnership as stipulated by laws and administrative regulations.

Signature (seal) of Party A: _ _ _ _ _ _ _

Date: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Signature (seal) of Party B: _ _ _ _ _ _ _ _ _ _ _

Date: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Signature (seal) of Party C: _ _ _ _ _ _ _ _ _ _ _

Date: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Model factory cooperation agreement contract (V) Party A (orderer): _ _ _ _ _ _ _ _ _ _ _

Address: _ _ _ _ _ _ _ _ _ _ _ _

Tel: _ _ _ _ _ _ _ _

Party B (Contractor): _ _ _ _ _ _ _ _ _ _ _

Address: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Tel: _ _ _ _ _ _ _ _ _ _ _

Now, through negotiation between Party A and Party B, based on the principle of equality, mutual benefit and common development, and on the basis of clarifying the rights and obligations of both parties, this contract is hereby concluded, with the following terms:

1. Quantity and price of clothes made by Party B for Party A.

Product name: _ _ _ _ _ _ _ _ _ _ _ _

Unit: _ _ _ _ _ _ _ _ _ _ _ _

Specification: _ _ _ _ _ _ _ _ _ _ _ _

Quantity: _ _ _ _ _ _ _ _ _ _ _ _

Unit price: _ _ _ _ _ _ _ _ _ _ _

Amount: _ _ _ _ _ _ _ _ _ _ _

Total: _ _ _ _ _ _ _ _ _ _ (RMB)

Total amount (in words): _ _ _ _ _ _ _ _ _ _ _

Second, tailor-made and delivery time.

1. Party B shall go to the place designated by Party A for cutting within _ _ _ _ _ _ days according to the cutting notice of Party A. ..

2. Party B shall deliver the goods within _ _ _ _ _ _ _ _ _ days after receiving the deposit from Party A and confirming the sample clothes and cutting, which is about _ _ _ _ _ _ _ _ _ _ _ _.

Third, the quality inspection and acceptance methods

1. After the contract is signed, the sample clothes provided by Party B must be approved and sealed by Party A, and the sealed sample clothes shall prevail when delivered.

2. Party B promises to provide first-class clothes, otherwise Party A has the right to request replacement.

Four, packaging requirements and freight burden

Party B shall be responsible for packaging and bear the packaging expenses, and Party B shall transport the goods to the place designated by Party A, and the transportation expenses shall be borne by Party B.. ..

Verb (abbreviation of verb) payment terms

1. After payment by Party A, Party B shall provide an ordinary invoice.

2. After the contract comes into effect, Party A shall pay _ _ _ _% of the total contract amount as the down payment. That is, RMB _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Party A shall pay _ _ _ _ _% of the total contract price, namely RMB _ _ _ _ _ _ _. In addition, _ _ _ _% of the total contract price is RMB _ _ _ _ _ _ _ _ _.

3. In order to safeguard the interests of both parties, the above-mentioned funds (deposit and balance) need to be remitted to the account designated by Party B after the contract is signed, otherwise, the payee needs to show the power of attorney of our company before withdrawing cash.

Liability for breach of contract of intransitive verbs

1. During the performance of this contract, any party's failure to perform any terms of this contract shall be regarded as a breach of contract, and the breaching party shall compensate all losses caused by the breach of contract.

2. Party B shall deliver the goods on time and Party A shall pay them on time. If the delivery is delayed due to Party B's reasons or the payment is delayed due to Party A's reasons, it shall bear _ _ _ _ _% of the total contract price as liquidated damages on a daily basis.

Seven, after-sales service

1. The clothing warranty period is _ _ _ _ _ _ days. During the warranty period, Party B will provide Party A with free refitting service.

2. Party B shall provide convenience for Party A to add or modify clothes at any time.

3. In the future, Party A will make up the clothes. If it is a complete set, it will be charged according to the complete set price in the quotation, and if it is a single piece, it will be charged according to the single piece price in the quotation.

Eight. Settlement of contract disputes

1. Disputes arising from this contract shall be settled by both parties through friendly negotiation.

2. Any dispute arising from or related to this contract shall be arbitrated by the Arbitration Commission.

3. Any change and dissolution shall take effect after both parties agree and sign written opinions.

Nine. If there are any amendments and supplementary clauses in this contract, they must be signed by authorized representatives of both parties, which shall be regarded as an integral part of this contract and have the same effect as the text of this contract.

X once this contract is signed, both parties shall strictly abide by and perform it, and it shall come into effect after being signed and sealed by both parties.

XI。 This contract is made in quadruplicate, with each party holding two copies, all of which have the same legal effect.

Party A (seal): _ _ _ _ _ _ _ _ _ _ _

Representative of Party A (signature): _ _ _ _ _ _ _ _ _ _ _

Account name: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Bank of deposit: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Account number: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Party B (seal): _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Representative of Party B (signature): _ _ _ _ _ _ _ _ _ _ _

Account name: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Bank of deposit: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Account number: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Date of contract signing: _ _ _ _ _ _ _ _ _ _ _ _