『一』 How to define the national occupational standards for laboratory workers and how to define them urgently. Thanks!
It is roughly divided into national occupational standards for chemical inspectors (laboratory technicians), national occupational standards for veterinary laboratory technicians, national occupational standards for feed inspection laboratory technicians, national occupational standards for aviation fuel laboratory technicians, etc. Basically it is defined by industry category.
『二』What certificate should a laboratory technician take and how to apply for it
The laboratory laboratory demobilization qualification certificate is easy to take. The laboratory laboratory laboratory technician qualification certificate generally has two sets of test papers: basic knowledge of laboratory theory and laboratory testing Practical basic knowledge, the exam is generally not difficult. The general exam is not difficult. It is recommended to apply for the highest level you meet, which depends on the individual's academic qualifications and length of service. According to the latest national occupational guidance requirements, laboratory workers are a special type of work in the country and must hold a national professional qualification certificate to work. The laboratory certificate can only be obtained at the vocational training base under the State Administration of Quality Supervision, and is a valid certificate. Note: Do not take those local or provincial assessments, or working in other places may not be recognized, because local protectionism is quite serious in some areas.
『三』 How to apply for the chemical inspector certificate
The laboratory technician qualification certificate needs to be assessed and appraised by the local labor qualification appraisal station and the laboratory technician qualification certificate will be issued. Generally, the company applies to the labor qualification appraisal station of the local Labor and Social Security Bureau and organizes participation in the assessment.
The chemical inspector certificate can be registered at the local vocational training center. The training center will inform you of the specific examination time.
Existing quality inspector certificates: Food Inspector Certificate, Fiber Inspector Certificate, Boiler Inspector Certificate, Pressure Vessel Inspector Certificate, Pressure Pipe Inspector Certificate, Elevator Inspector Certificate, Tower Crane Inspector Certificate certificate, water quality inspector certificate, large amusement facilities inspector certificate, etc.
The examination generally has two sets of test papers: basic knowledge of laboratory theory and basic knowledge of laboratory practice.
The general exam is not difficult. The highest level you can apply for depends on your academic qualifications and length of service. According to the latest national occupational guidance requirements, laboratory workers are a special type of work in the country and must hold a national professional qualification certificate to work. The laboratory certificate can only be obtained at the vocational training base under the State Administration of Quality Supervision, and is a valid certificate.
Strictly speaking, only public institutions and research units have such qualification certificates. At best, they can be titled as laboratory assistant engineer, laboratory engineer, laboratory senior engineer, etc. As long as you stay in the unit and wait until you are old enough, More or less you can get it. Those in society can only take professional title examinations or labor skills. You can also take the qualification certificate for industry training.
(3) Extended reading for the laboratory technician qualification examination:
Application conditions for the chemical laboratory technician qualification certificate
1. Apply for the junior qualification of chemical laboratory technician: engage in this type of work More than three years; or completion of apprenticeship in this profession; or junior vocational school graduates.
2. Apply for the intermediate qualification of chemical inspector: after obtaining the primary vocational qualification certificate, work continuously in this profession for more than three years; or obtain the graduation (completion) certificate through intermediate vocational skills training; or technical secondary school, Graduates of corresponding majors from secondary vocational schools.
3. Apply for the advanced qualification of chemical inspector: after obtaining the intermediate vocational qualification certificate, work continuously in this occupation for more than five years; or obtain the graduation (completion) certificate through advanced vocational skills training; or technical secondary school degree , have worked in this position for five years; or have a college degree and have worked for more than three years.
The application time is not fixed. For the specific time, please refer to the notice of the professional qualification examination office in the place where you apply.
Network-Quality Inspector
Network-Laborator
『四』 What are the responsibilities and work content of a laboratory technician? What are the qualification examinations? I have just graduated. , I found a job as a laboratory technician, thank you all
Laboratory technicians in pharmaceutical companies can take two national professional qualification certificates, namely drug laboratory technician and chemical laboratory technician, which are also industry employment certificates. No matter which test you take, your company will first register you collectively at the local drug regulatory department or vocational skills appraisal center, because individual registration is not accepted.
To obtain a drug inspection certificate, go to the local drug regulatory department to register and receive training. The certificate will be issued after passing the exam. For chemical inspector certificates, go to the local vocational skills appraisal center to register and receive training. After passing the exam, the certificate will be issued.
Application conditions for drug inspection workers:
1. Those who meet one of the following conditions can apply to apply for entry-level workers:
(1) In the same occupation (type of work) ) Those who have worked continuously for more than two years or have worked for more than four years in total;
(2) Those who have completed junior worker training.
2. Those who meet one of the following conditions can apply to apply for intermediate workers:
(1) Those who have obtained the junior worker grade certificate for the declared occupation (type of work) for three years or more;
p>
(2) Those who have obtained the junior worker level certificate of the declared occupation (type of work) and completed the intermediate worker training;
(3) Graduated from colleges and universities or secondary vocational schools and are engaged in the field of study Working in an occupation (type of work) corresponding to the major.
3. Those who meet one of the following conditions can apply to apply for senior workers:
(1) Those who have obtained the intermediate worker grade certificate for the declared occupation (type of work) for four years;
p>
(2) Those who have obtained the intermediate-level worker certificate of the declared occupation (type of work) and completed senior worker training;
(3) Graduated from colleges and universities and obtained the intermediate-level certificate of the applied occupation (type of work) Industrial grade certificate.
Application requirements for chemical inspection workers:
——Junior level (those who meet one of the following conditions)
(1) Meet the required standards through formal junior formal training for this profession number of hours of study and obtain a graduation (completion) certificate.
(2) Work as a trainee in this profession for more than 2 consecutive years.
——Intermediate (those who meet one of the following conditions)
(1) After obtaining the junior professional qualification certificate of this occupation, have been engaged in this occupation for more than 3 years continuously, and have passed the intermediate formal qualification of this occupation The training reaches the required standard hours and a graduation (completion) certificate is obtained.
(2) After obtaining the primary professional qualification certificate for this profession, work in this profession continuously for more than 4 years.
(3) Have been engaged in this profession continuously for more than 5 years.
(4) Obtain a vocational (professional) graduation certificate from a secondary vocational school or above that is approved by the labor and social security administrative department and aims at cultivating intermediate skills.
——Senior (those who meet one of the following conditions)
(1) After obtaining the intermediate professional qualification certificate of this occupation, continuously working in this occupation for more than 3 years, and passing the senior qualification certificate of this occupation Formal training must meet the prescribed standard hours and obtain a graduation (completion) certificate.
(2) After obtaining the intermediate professional qualification certificate for this occupation, work in this occupation continuously for more than 5 years.
(3) Obtain a vocational (major) graduation certificate from a higher vocational school that is approved by the labor and social security administrative department and aims at cultivating advanced skills.
(4) Graduates of a college major or related major who have obtained an intermediate professional qualification certificate in this occupation and have been working in this occupation continuously for more than 2 years.
——Technician (those who meet one of the following conditions)
(1) After obtaining the senior professional qualification certificate of this profession, and working in this profession continuously for more than 5 years, after being certified as a professional technician Formal training must meet the prescribed standard hours and obtain a graduation (completion) certificate.
(2) After obtaining the senior professional qualification certificate for this profession, work in this profession continuously for more than 6 years.
(3) Graduates of senior technical schools who have obtained the senior professional qualification certificate for this profession (major) and have been working in this profession for more than two consecutive years.
(4) Graduates of a bachelor's degree or related major who have obtained an advanced professional qualification certificate for this profession and have been working in this profession for more than 1 year.
——Senior technician (one who meets one of the following conditions)
(1) After obtaining the technician professional qualification certificate of this profession, he has been working in this profession for more than 3 years continuously. Senior technicians must receive formal training for the prescribed number of standard hours and obtain a graduation (completion) certificate.
(2) After obtaining the professional qualification certificate of this professional technician, work in this profession continuously for more than 5 years.
『五』What are the responsibilities and work contents of laboratory technicians and what qualification examinations are required
Laboratory technicians are graded and have a unified national examination. You can look it up. The following are the laboratory technician responsibilities of the two units for reference only. Laboratory technician job responsibilities 1. Carry out water quality testing work carefully and meticulously, effectively control the quality, and ensure that the water quality of the factory products is 100% qualified. 2. Take samples for testing every day in the finished product packaging workshop or barreling workshop. If there are any straws during operation, they should be cleaned with disinfectant water first, and then placed in a pressure cooker for disinfection to ensure that the entire testing process is completed in a sterile state. 3. If the test results are found to exceed the standard or show signs of exceeding the standard (less than three Escherichia coli per 100 milliliters, less than 100 bacteria per milliliter), you should go to the water treatment center to take samples directly for further testing and analyze to find out the reasons. 4. After the test results come out, you must carefully fill in the test form, make sure the numbers are accurate, the information is complete, and send it to the leader in charge of production for signature. 5. Laboratory instruments should be cleaned promptly after use, and the laboratory should always be kept in good sanitary condition, with windows kept clean and spotless. 6. In addition to doing water quality testing, complete other tasks such as packaging of finished products as needed and arranged by the leader. Responsibilities of laboratory technicians 1. When collecting specimens, strictly implement the checking system. Specimens that do not meet the requirements should be collected again. A report for ordinary examination should be issued before get off work on the same day. A report for emergency examination should be issued at any time after the specimens are completed. 2. Carefully check the inspection results, fill in the inspection report form, register it, sign and issue the report. If the inspection results are inconsistent with the prison bed or are suspicious, take the initiative to contact the prison bed for re-inspection. 3. Special standards should be kept for 24 hours after issuance. Generally, standard vehicles and utensils should be disinfected immediately, contaminated utensils should be autoclaved before washing, and suspected pathogenic microorganisms should be incinerated at designated locations to prevent cross-infection. 4. Ensure testing and treatment, and regularly check the sensitivity of reagents and calibration instruments. 5. Actively cooperate with medical and scientific research to carry out new inspection projects.
6. Bacteria, poisons, highly toxic reagents, flammable, explosive, strong acids, strong alkali and valuable instruments must be strictly kept by designated personnel and inspected regularly.
"Lu" What certificate should a laboratory technician take and how to apply for it?
A laboratory technician should take the National Vocational Qualification Certificate. Laboratory technicians must first hold a national professional qualification certificate for laboratory technicians before they can work. According to the national occupational guidance requirements, inspection workers belong to a national special type of work and must hold a national professional qualification certificate to work. Laboratory testers can only be registered with the Ministry of Human Resources and Social Security Registration is a valid document. To apply, you need to sign up for laboratory technician training schools in various places, and then the school will hold laboratory technician qualification examinations regularly. If you pass, you can obtain the certificate.
『撒』 What is the use of the chemical inspection work permit for future work?
The chemical inspection work permit is useful for future work.
In accordance with the spirit of the documents of the "Labor Law of the People's Republic of China" and the Ministry of Labor and Social Security's "Regulations on the Recruitment of Technical Workers" (Ministerial Order No. 6), further implement the national professional qualifications The certificate system realizes the national requirement that chemical inspection personnel must hold certificates to work.
As a professional qualification certificate, it is required by some employers when recruiting, and is used when these units are audited by national units, because employees in inspection and calibration laboratories are required to maintain Those who work with certificates. For more formal units, if you do not have the corresponding certificate, they will not hire you. Under the same conditions, applicants with certificates have a much higher chance of being hired, so it is best to obtain certificates.
:
Occupational level:
This occupation has five levels, namely: junior (National Vocational Qualification Level 5), intermediate (National Vocational Qualification Level 5) Vocational Qualification Level 4), Senior (National Vocational Qualification Level 3), Technician (National Vocational Qualification Level 2), Senior Technician (National Vocational Qualification Level 1).
『8』 How to take the National Vocational Qualification Certificate for Food Inspector
Application conditions
1. Those who meet one of the following conditions can apply to apply for entry-level workers:
(1) Those who have worked in the same occupation (type of work) continuously for more than two years or have worked for more than four years in total;
(2) Those who have completed junior worker training.
2. Those who meet one of the following conditions can apply to apply for intermediate workers:
(1) Obtain the junior worker grade certificate for the applied occupation (type of work) for three years;
p>
(2) Obtain the junior worker grade certificate of the declared occupation (type of work) and complete the intermediate worker training;
(3) Graduate from colleges and universities or secondary vocational schools and engage in the field of study Occupational (type of work) work corresponding to the major. (8) Extended reading for laboratory technician qualification examination:
1. Occupational requirements:
1. Occupational knowledge requirements
(1) Basic knowledge of standardized measurement quality< /p>
(2) Basic knowledge of chemistry (including safety and health knowledge)
(3) Knowledge of analytical chemistry
(4) Basic knowledge of electrical engineering
< p> (5) Computer operation knowledge(6) Knowledge of relevant laws and regulations
2. Professional ability elements
Have certain observation, judgment and calculation Ability, strong color resolution and ability to handle emergencies.
3. Work requirements
This standard sets the skill requirements for junior, intermediate, senior, technician and senior technician in order, with high-level requirements including low-level requirements.
4. Basic educational level
Graduation from high school or technical secondary school (or equivalent).
2. Relevant knowledge
1. Knowledge of the use of pycnometers
2. Knowledge of volumetric method
3. Basic knowledge of microorganisms
4. Knowledge of the use of visible light spectrophotometer
Inspection result analysis and inspection report preparation can correctly calculate and process experimental data errors. General knowledge and common methods of data processing
『玖』 Can a laboratory technician take the national professional title?
Yes.
The national occupational standards for chemical inspection workers*** have five levels, namely: junior (National Vocational Qualification Level 5), intermediate (National Vocational Qualification Level 4), and advanced (National Vocational Qualification Level 3) , technician (National Vocational Qualification Level 2), senior technician (National Vocational Qualification Level 1).
Full-time vocational school education is determined based on its training objectives and teaching plans. Promotion training period: no less than 180 standard hours for junior, intermediate, and advanced levels; no less than 150 standard hours for technicians and senior technicians.
(9) Extended reading for the chemical laboratory technician qualification examination:
National occupational standards for chemical laboratory workers:
1. It is divided into theoretical knowledge examination and skill operation Assessment. The theoretical knowledge examination adopts a closed-book written examination, and the skill operation assessment adopts on-site practical operation.
2. The theoretical knowledge examination and skill operation assessment are both based on a hundred-point system, and those with scores of 60 or above are considered qualified.
The identification of technicians and senior technicians must also undergo a comprehensive review.
3. The theoretical knowledge test is conducted in a standard classroom; the skill operation assessment is conducted in a laboratory equipped with necessary testing instruments and equipment. The environmental conditions, instruments and equipment, reagents, reference materials, tools and samples to be tested in the laboratory can meet the needs of the identification project. Various measuring instruments must pass the measurement verification and be within the validity period of the verification.
"Shi" What certificate should a laboratory technician take and how to apply for it?
A laboratory technician should take the National Vocational Qualification Certificate for Laboratory Technician. Laboratory technicians must first hold a national professional qualification certificate for laboratory technicians before they can work. According to the national occupational guidance requirements, inspection workers belong to the national special type of work and must hold a national professional qualification certificate to work. Chemical verification can only be registered and filed with the Ministry of Human Resources and Social Security to be a valid certificate.
To apply, you need to sign up for laboratory technician training schools in various places, and then the school will hold laboratory technician qualification examinations regularly. If you pass, you can obtain the certificate.
A laboratory technician who determines the presence or presence of one or more components of a substance (such as a mineral, alloy, drug, antibiotic, or food), or more often, determines the presence or absence of these components. A person who performs chemical experiments on the content of (10) Extended reading for the Laboratory Technologist Qualification Examination
Overview of the knowledge and abilities required of laboratory technicians
1. Master physical chemistry, medicinal chemistry, medicinal polymer materials, and industrial pharmaceutics Basic theories and basic knowledge of science, preparation equipment and workshop process design;
2. Master preparation research, dosage form design and improvement, and process design of pharmaceutical preparation production;
< p> 3. Have preliminary capabilities in research and development of pharmaceutical preparations, design and improvement of dosage forms, and design of pharmaceutical preparation production processes;4. Familiar with regulations and policies on pharmaceutical management;
< p> 5. Understand the development trends of modern pharmaceutical preparations;6. Master the basic methods of literature retrieval and data query, and have preliminary scientific research and practical work capabilities.