First, the sliding door installation steps
1. Install the top limit groove: the width of the limit groove should be at least 2-4mm larger than the glass thickness, and the depth should be at least 10-20mm, so that the door can be fixed and pushed and pulled smoothly. During the formal installation, the depth of the groove can be adjusted by the adhesive pad to achieve the most suitable depth.
2. Positioning and setting-out: No matter what type of sliding door, it is necessary to carry out unified setting-out and positioning, and set out positioning lines according to the requirements of design drawings to determine the position of the door frame. In order to make the installation have a firm effect, a certain amount of glass glue should be injected into the limit groove, both sides of the bracket groove and the joint of the frame column. When it's dry, scrape it off with a utility knife.
3. Install the wooden base: fix the metal veneer on the square wood with glue; If it is an aluminum alloy square tube, it can be fixed with its aluminum; So as to fix it on the wooden brick with wooden screws.
4. Installation of vertical door frame: nail the square timber of the door frame according to the center line, and then wrap the metal decorative surface according to the shape and position of the door frame column. It is worth noting that the joint position should be in the middle door position on both sides of the glass.
5. Install the glass on the sliding door: First, insert the top of the glass into the limit groove at the top of the door frame.
Then slowly fix the lower part of the glass on the bottom bracket; In order to ensure the safety of use, small wooden strips can be nailed inside and outside the base, which can play a good role in secondary fixation. 6. When installing sliding doors, no matter what style or material, the whole needs to be horizontal and vertical. At present, the adjustable error of the door inclination is about10 mm. If the inclination is serious and the slope is large, it is recommended to install it again.
Second, the sliding door installation matters needing attention
1. Before installing the door, check whether the door itself is flat and whether some reserved holes are neat and accurate. Do not meet, should be corrected immediately. During installation, steel frames and doors shall be fixed with steel wire clips, with at least two on each side. At the same time, putty can also be applied to the steel wire card to increase the sealing performance.
2. If it is fixed with putty, it must be filled and polished; If a rubber pad is used, it needs to be embedded and then fixed with screws.
Summary: The above is about the installation of sliding doors and the installation steps of sliding doors. It is not difficult to see from the installation of the sliding door that there are still many details to pay attention to. Therefore, we must not be careless in the construction. If the door is crooked, it will be a bit embarrassing.
The second designer competition of Smick ceramic tile cup won a cash prize of 65438+ 10,000 yuan.
Dear, whether the above content has not solved your problem, the decoration expert group will provide you with one-on-one consulting services (review of decoration budget quotation, suggestions for apartment decoration, solutions to intractable diseases, detailed explanation of material selection, and reminders of difficult decoration). Please add the micro signal: qijia52032 1.