How to scan continuously?
Question 1: How does the scanner scan continuously? 1. This function can be achieved by software program and has nothing to do with the scanner hardware itself.
2. Just turn on the "save multiple pictures in one file" or a function with a similar name.
After scanning one page, the flatbed scanner will prompt you whether to continue until the scan is completed.
After scanning all the automatic paper feeds as usual, one file will be saved.
3. For example: Zhongjing’s entire series of scanners support “saving multiple pictures in one file”, and the saving format supports TIF, PDF, etc.
Question 2: How to make Word scan continuously? This should be a problem with the scanner settings. The scanner I have used can be set when scanning. When scanning the first page, select "There is a next page". After scanning one page, place the next page, and then continue to press "Start" to continue scanning.
Question 3: How to let the scanner scan multiple sheets of paper at once
Question 4: How to scan continuously with the scanner of HP M1522nf all-in-one machine. It can scan more than 1 sheet of paper continuously without manual operation. Dear HP user, hello! Thank you very much for choosing HP products.
Based on your description, it is recommended that you refer to the following information:
1. Place the multi-page scanned originals in the top feeder of the 1522.
2. The following is the driver link for the 1522nf printer on the HP website:
h20566.2.hp/...480143
After opening the web page, select After downloading the operating system of your computer, download the full version of the 200MB driver and install it.
After installing the driver, start - Program - HP-1522 - Scan on the computer. In the new pop-up dialog box, select Settings - When setting the scanning parameters, select the saving format as .pdf or .tiff and then click Scan according to the prompts.
You can scan multiple original pages continuously and save them as one document.
I hope the above reply will be helpful to you.
If the above information does not solve your problem, you can log in to the HP network online chat room hp/chat and consult with an online engineer to help you further solve the problem
.
More product information is available on hp/800
Question 5: How to set the computer to continuous scanning? Do you need scanner support?
Question 6: Brother How to batch and continuous scan the MFC-7420 all-in-one machine. If you want to achieve batch scanning, first sort out the files to be scanned and put them into the file feeder. The number of pages to rotate depends on the specific requirements of the machine. It should probably not exceed 50 pages at most; then Open the scanning software on your computer, select "File Feeder" as the paper feeding method, select the saving path of the scanned file and the file name of the image, and then you can scan continuously.
The document feeder, commonly known as the ADF feeder, is on the top cover of the machine. Unlike the glass plate where documents can only be placed for scanning and copying, where only one document can be placed, the ADF can realize continuous paper feeding. Scan and copy.
Question 7: How to scan continuously with M1005MFP? Hello
Thank you for choosing HP products
Please download the full version of the driver software for testing
h20564.2.hp/...d=4062
I am an HP employee.
If the above information does not solve your problem, you can add the official account: "HP Service" through WeChat on your mobile phone and we will guide you online. You can continue to ask questions, or seek help by visiting the HP technical support webpage (hp/) or the HP technical support forum (hp/hpmunity). Thank you for your support of HP
If you need to inquire about the prices of HP products and consumables, please directly send your name, phone number (please leave a backup phone number if you have one), your province and city and you
Send me an email to: [emailprotected] for your specific purchase needs. We will have professional engineers to "recommend suitable models and inquire detailed prices" for you, and "more discounts and surprises" are waiting for you!
Question 8: How to set up two consecutive scans of the same document? Question: How to make the original word document use the same template? For example, my previous document was set to a size 3 font, but now it is a size 5, and the template I am using now has grid lines added. In this case, I want to change all the documents on my computer to the style of the current template at once. , how should we do it! Answer: After setting is completed - save as: template format.
Use...
Question 9: How to scan documents or pictures in batches and continuously under Win7? 5 points I also have this printer, but I have found a way to be lazy
The normal driver installation path is in "C:\ProgramFiles\HP\HPLaserJetM1005MFP\"
Find this program in the ScnTo folder: hppscan0.exe
Right-click the shortcut to the desktop Above, you only need to click to scan next time, which is very convenient
Question 10: How does the Founder scanner scan continuously? Are you talking about scanning pictures or barcodes?
If you are scanning a barcode, you need to set it up in the manual, just type a barcode for continuous scanning and scan it.
Select the scan menu on the scanner, configure the relevant settings for scanning, place the scanned original on the right side of the scanner, click the collate scan/multi-page scan button in the picture above to select the file you want to save to account, and then the scanner will feed the paper and start multi-page scanning.
Note: After scanning a drawing, you do not need to press the save button on the scanner. Take out the original, place the second drawing, and then click the collate scan/multi-page scan button. Subsequent scans Repeat this operation until the last piece is scanned, and click the Save button.
How to batch scan with a scanner?
How to let the scanner scan multiple sheets of paper at once? How to batch scan photos with a scanner?
Then you have to use a specific scanner, the one that does not need to be transported
May I ask how to let Photoshop batch scan
1. Prepare to record the action: F9 (Calling out the action panel) - Find the new action on the panel and give it a name such as "Batch Scan" - Click OK to start recording 2. Record the scanning action: File - Import - Your Scanner - Scan once 3. Stop recording the action: Click on the action panel to stop recording. 4. File-Auto-Batch Processing: Find "Batch Scan" in the [Action] column; select the folder where the files you want to scan are in the [Source] column; Select the folder you want to save in the column - OK.
How to implement simple batch scanning
How to use ACDSEE to achieve simple batch scanning: ACDSee related settings 1. First, you must make relevant settings for automatic saving of scan results. This step must be Do this before starting the scanning interface, otherwise you will not be able to change the settings once you start the scanning interface. Start ACDSee and put it in the picture browsing interface (that is, the folder tree is on the left and the picture file is on the right). Select the "AcquireSetup..." item from the "File" menu, and its setting dialog box will appear. First, in the "File Name Template" at the bottom of the dialog box, enter a file name that is convenient for expressing the content of the photo. Chinese file names can be supported, and the "#" symbol is added at the end of the file name. This "#" symbol is used to automatically name the file. The secret is that the image files scanned in the future will be composed of your name and an increasing integer number. The number of "#" symbols to add depends on the number of photos you scan. Generally speaking, 3 "#" symbols are appropriate, so that you don't need to reset it when scanning less than 1,000 photos. 2. Then choose the output format of the scanned image. ACDSee supports the 7 most common image formats. Generally speaking, it is better to choose JPG format, as the image quality and file size are more satisfactory. Next to the "Image Format" drop-down box, there is the corresponding "Option" button, which allows you to set the image characteristics of the format. Generally, it is enough to maintain a compression ratio of about 85%. You can leave it alone for other options. If your computer is also equipped with other video interfaces such as a digital camera, you will also need to select the scanner port in the "TwainSource" window. At this point, the setting of ACDSee is complete, and there is no need to set it up again when using it in the future. 3. Start scanning. 4. Connect the scanner correctly, and then place as many photos as possible on the scanner glass panel. For standard A4 format flatbed scanners, up to five standard color photos can be placed. A3 format flatbed scanners can place More photos. Close the scanner cover, select the folder to store the scanned images in the folder tree on the left side of the ACDSee interface, and then click the "Acquire" icon on the toolbar, ACDSee can capture and start the scanning interface. After selecting the "Multi-area Scan" mode and various scanning parameters on the scanning interface, click the "Pre-scan" button. Since the boundaries between the five photos are very clear, the scanner will automatically judge and circle the five scans respectively. area. 5. Click the "Formal Scan" button, and the scanner will start working. After scanning a photo, ACDSee will automatically name it and save it to the folder you specify, and then automatically scan the remaining photos. Similarly Automatically name and save it. Taking the author's settings as an example, all files will be automatically named and saved as "czp_paint_001.jpg, czp_paint_002.jpg" in sequence, and the next time it is scanned, ACDSee will automatically start from the last file name and save the names in backward order, which is very convenient. In this way, you can scan multiple photos at one time and save them with fully automatic naming. There is no need for manual intervention during the scanning process, and the efficiency is naturally greatly improved.
High-speed batch scanner
First of all, I am sure that your company must have a lot of information. Based on the questions you mentioned, I have sorted out the general answers as follows: (If there is anything unclear Please elaborate in the supplementary section of the question)
1: Fast, continuous scanning model (double-sided)
2: A4 format
3: Scanning After completion, it can be converted directly into multi-page PDF format on the computer
Personal recommendation:
A4 format
1: Kodak (Model: I1320)
Speed: 40PPM/80IPM (40 images per minute for single page, 80 images per minute for double-sided)
The built-in software can convert to multi-page PDF documents
2 : Panasonic (Model: KV-1045C)
Speed: 40PPM/80IPM (40 images per minute for single page, 80 images per minute for double-sided)
The built-in software can be converted to Multi-page PDF document
3: Fujitsu (Model: Fi-6140)
Speed: 40PPM/80IPM (single page 40 images per minute, double-sided 80 images per minute)< /p>
The built-in software can convert multi-page PDF documents
I believe that the above models can meet your needs, and the market prices are around 2~3W. You can contact your local dealer. If you are in East China, I can recommend the general agents of these brands to you
Note: Of course, there are some other good brands on the market, such as Canon, Hongguang, Zhongjing, etc.
How to scan in batches with Scanner ds-860
Find the PDF settings and select Continuous Scan
How to scan in batches with Brother MFC-7420 all-in-one machine
If you want to implement batch scanning, first organize and put the files to be scanned into the file feeder. The number of pages in the rotated file depends on the specific requirements of the machine. It should probably not exceed 50 pages at most; then open the scan function on the computer. Software, select "File Feeder" as the paper feeding method, select the save path of the scanned file and the file name of the image, and then you can scan continuously.
The document feeder, commonly known as the ADF feeder, is on the top cover of the machine. Unlike the glass plate where documents can only be placed for scanning and copying, where only one document can be placed, the ADF can realize continuous paper feeding. Scan and copy.
The text is double-sided and scanned into PDF. The scanner can scan in batches, but it cannot directly scan both sides. Now it can only be scanned twice and then scanned according to the odd and even numbers
Original A very challenging question was raised. What should I do if I don’t have a duplex scanner and I want to scan two-sided documents?
Since the poster uses batch scanning, it means that the scanning volume is large. If you insert page by page, the workload will be large, and manual operation is prone to errors.
You can try the following method, which may reduce some workload.
1) When scanning, do not scan into PDF files first, but scan into pictures;
2) Modify these files in batches and in sequence into uniformly numbered file names. ;
3) Then combine these files into a PDF file, which is very simple.
The key is to modify the file name. There are many introductions to this on the Internet, you can refer to it.
How to batch scan and import files with Epson L565
Put the paper to be scanned into the document feeder with the paper facing down. Right-click the printer driver on the computer, scan, and then change the output format to jpg and scan.
How to batch scan the hp1216?
Hello, thank you for choosing HP products.
Put your scanned file on the ADF board, and then open the setting options in HPSCAN--find relevant information about multi-page document scanning.
If the above information does not solve your problem, you can continue to ask questions, or seek help by visiting the HP technical support webpage (hp/support) or the HP home product support forum (hp/hpmunity). Thank you for your support of HP
How to batch scan
Question 1: How to implement simple batch scanning Using ACDSEE to achieve simple batch scanning Method: ACDSee related settings 1. First, perform Regarding the settings related to automatic saving of scan results, this step must be performed before starting the scanning interface, otherwise the settings cannot be changed once the scanning interface is started. Start ACDSee and put it in the picture browsing interface (that is, the folder tree is on the left and the picture file is on the right). Select the "AcquireSetup..." item from the "File" menu, and its setting dialog box will appear. First, in the "File Name Template" at the bottom of the dialog box, enter a file name that is convenient for expressing the content of the photo. Chinese file names can be supported, and the "#" symbol is added at the end of the file name. This "#" symbol is used to automatically name the file. The secret is that the image files scanned in the future will be composed of your name and an increasing integer number. The number of "#" symbols to add depends on the number of photos you scan. Generally speaking, 3 "#" symbols are appropriate, so that you don't need to reset it when scanning less than 1,000 photos.
2. Then choose the output format of the scanned image. ACDSee supports the 7 most common image formats. Generally speaking, it is better to choose JPG format, as the image quality and file size are more satisfactory. Next to the "Image Format" drop-down box, there is the corresponding "Options" button, which allows you to set the image characteristics of the format. Generally, it is enough to maintain a compression ratio of about 85%. You can leave it alone for other options. If your computer is also equipped with other video interfaces such as a digital camera, you will also need to select the scanner port in the "TwainSource" window. At this point, the setting of ACDSee is complete, and there is no need to set it up again when using it in the future. 3. Start scanning. 4. Connect the scanner correctly, and then place as many photos as possible on the scanner glass panel. For standard A4 format flatbed scanners, up to five standard color photos can be placed. A3 format flatbed scanners can place More photos. Close the scanner cover, select the folder to store the scanned images in the folder tree on the left side of the ACDSee interface, and then click the "Acquire" icon on the toolbar, ACDSee can capture and start the scanning interface. After selecting the "Multi-area Scan" mode and various scanning parameters on the scanning interface, click the "Pre-scan" button. Since the boundaries between the five photos are very clear, the scanner will automatically judge and circle the five scans respectively. area. 5. Click the "Formal Scan" button, and the scanner will start working. After scanning a photo, ACDSee will automatically name it and save it to the folder you specify, and then automatically scan the remaining photos. Similarly Automatically name and save it. Taking the author's settings as an example, all files will be automatically named and saved as "czp_paint_001.jpg, czp_paint_002.jpg", and the next time it is scanned, ACDSee will automatically start from the last file name and name and save them in backward order, which is very convenient. In this way, you can scan multiple photos at one time and save them with fully automatic naming. There is no need for manual intervention during the scanning process, and the efficiency is naturally greatly improved.
Question 2: How to batch scan photoshop? 1. Prepare to record actions: F9 (call out the action panel) - Find the new action on the panel and give it a name such as "Batch Scan" - Click OK to start Recording 2. Record scanning action: File-Import-your scanner-scan once 3. Stop recording action: Click on the action panel to stop recording 4. File-Auto-Batch Processing: Find "Batch Scan" in the [Action] column "; In the [Source] column, select the folder where the file you want to scan is located; in the [Destination] column, select the folder you want to store - OK.
Question 3: How to batch scan photos with a scanner? Then you have to use a specific scanner, the one that does not need to be transported
Question 4: How to batch and continuous scan the Brother MFC-7420 all-in-one machine. If you want to achieve batch scanning, first organize and consolidate the files that need to be scanned. Into the file feeder, the number of pages to rotate the file depends on the specific requirements of the machine, which is probably no more than 50 pages at most; then open the scanning software on the computer, select "File Feeder" as the paper feeding method, and select the save path of the scanned file. After the file name of the picture, you can scan continuously.
The document feeder, commonly known as the ADF feeder, is on the top cover of the machine. Unlike the glass plate where documents can only be placed for scanning and copying, where only one document can be placed, the ADF can realize continuous paper feeding. Scan and copy.
Question 5: How to let the scanner scan multiple sheets of paper at once
Question 6: How to easily batch scan what to scan?
Question 7: Can batch scanning be achieved with an all-in-one machine? I will give you a URL
tech.sina/h/2007-12-04/1813509154.shtml
Question 8: How can I find the PDF settings for batch scanning with the ds-860 scanner? Just select Continuous Scan
Question 9: Is there any software that can batch scan the hard drive to check the quality of the hard drive? For example, the writing speed of a hard disk is only 45M/S. It doesn’t matter which software you use.
Question 10: How to batch scan and import files with Epson L565? Put the paper to be scanned into the document feeder with the text facing down. Right-click the printer driver on the computer, scan, and then change the output format to jpg point scan
How to set up continuous scanning for the printer
General printers will have a scanning function. If When there is only one piece of paper, we can scan it by placing the paper on the glass panel of the printer. However, if there is a lot of data, putting them one by one is a waste of time. Let me teach you how to set up the printer for continuous scanning.
First put the data to be scanned into the paper input slot on the top of the printer, with the side with the text facing up.
Find the scanner program installed on your computer; click the Start icon in the lower left corner of the computer, and then click All Programs.
After clicking on All Programs, we can see the fax and scan icons, click on this icon.
After clicking the fax and scan icon, the main interface of the scanner program will pop up. Click New Scan in the upper left corner of the page.
After clicking New Scan in the upper left corner of the page, the page will pop up. Options, click the option next to the source, and select the paper tray.
After selecting the paper tray, click Scan in the lower right corner of the options dialog box.
After clicking Scan in the lower right corner of the options dialog box, the printer will scan continuously, and while scanning, the progress bar will display the number of pages being scanned.