The accident investigation report can be described from three aspects: first, it can describe the purpose of the investigation report; Second, it can describe the specific process and data of the investigation; Thirdly, it should describe the results and analysis of the investigation report.
Model essay on accident investigation report 1:
1. Project Name: Qingyang Yinlong Jiayuan Commercial and Residential Community
Second, the construction unit: Zhejiang Zhonglun Construction Co., Ltd.
Third, the accident process:
At about 9: 20 a.m. on March 29th, 2008, the electric welding workers on the 7th floor of 1 1# Building in Qingyang Yinlongjiayuan Commercial and Residential Community were carrying out electroslag pressure welding, which caused the welding slag to splash and fall to the outer frame in the southwest corner of the second floor, causing the outer frame isolation protective plate to burn, causing two bamboo pieces and a safety net to burn.
After the accident, the management personnel of the project department, led by Manager Ye, rushed to the scene of the accident at the first time and successfully put out the fire with dry powder fire extinguishers and fire water, thus eliminating hidden dangers.
Four. Type and nature of the accident:
According to the on-site investigation and evidence collection, it was identified as a general fire safety accident.
Verb (abbreviation for verb) Cause of accident:
According to the field analysis and the work content of the day, it is inferred that the direct cause of the fire is the spatter of welding slag during electroslag pressure welding. The pressure welding operator did not set a protective plate to prevent the welding slag from falling when working at the edge, and the protective measures were not in place. Secondly, because the wind was strong at that time, it was the indirect cause of the fire.
Six, the handling of those responsible for the accident:
1, strengthen the safety education of welding workers, improve safety awareness, make them strictly abide by the safety rules and regulations and technical disclosure on the construction site, and carry out construction operations in accordance with correct safety operation procedures.
2. Give the pressure welding team an economic penalty of RMB in 800 yuan.
Seven. Future preventive and corrective measures
1. Strengthen the pre-job safety education for workers, especially special operators must hold relevant certificates.
2. Before the next operation, the operator shall be given on-site safety technical disclosure.
3, strengthen the on-site safety inspection and supervision, it is forbidden to have hidden dangers.
Article 2 of the model accident investigation report:
1. Project name: Jinbi Guanrong Building 3#, 4# and 6#.
2. Time of accident: 5:00-5:30 on October 27th, 2009 10.
3. Accident category:
4. Accident level:
5. Details of the accident: (attach a separate page) When workers were pulling bricks on the feeding platform of Floor 4 18 of Central Flower City, a template at the joint between the balcony and the lifting platform was not fixed properly, and the workers accidentally fell to Floor 16 when pulling bricks. A template laid at the entrance of the passage fell, which injured a template worker in the kitchen and bathroom of his team. He was sent to the hospital for filming and diagnosis, but did not cause much harm.
7. Accident cause analysis (subject to expert analysis)
Lack of concentration, mental paralysis and weak safety awareness during operation. 8. Accident treatment and measures to prevent the accident from happening again:
Through this safety accident, every worker in our construction site has a poor sense of safety. Rectification measures are proposed for the safety work of buildings 3#, 4# and 6#. 1) Strengthen the safety education for workers; 2) Rectify all safety protection facilities on the floor; 3) Strengthen the inspection of floor safety protection. Put an end to all kinds of potential safety hazards.
Participants in the survey:
Person in charge of the accident:
Signature of person in charge: signature of watchmaker: tabulation date:
He' nan hongqiqu construction group co., ltd
Article 3 of the model accident investigation report:
1. Coal mine accidents in the county started from _ _ to 20 _ _.
From _ _ to 20__, there were 25 coal mine production safety accidents in the county, with the death rate of 3 1 person, the death rate of one million tons of 8.86%, and the direct economic loss of 1.3845 million yuan.
Second, the main problems existing in the current coal mine safety production
At present, the main problems existing in coal mine safety production are:
1. From the analysis of accident types, there were 23 roof accidents in China * * * production party in three years, and 24 people died, accounting for 92% and 77.4% of the total accidents in three years respectively; Among them, there were gas accidents in Guangou Coal Mine 1994 in our county, and a major gas explosion accident occurred again _ _ years later. The outburst of roof accidents and the recurrence of gas accidents indicate that the key points of coal mine safety production in this county have not been grasped, and the measures to prevent roof accidents and gas accidents have not been put in place.
2. From the analysis of the nature of accidents, 25 accidents in three years were all responsibility accidents, which were all caused by "three violations" of enterprise personnel, indicating that the safety education of employees in the coal industry in our county was lagging behind, the safety quality was generally low, the awareness of self-protection was poor, and the consciousness of observing safety production laws and regulations was not strong.
3. From the analysis of accident causes, the main causes of roof accidents are objectively poor basic conditions of coal mines in this county, unreasonable layout of shafts and lanes, and insufficient safety investment. Subjectively, it is caused by the workers' lack of adequate support or untimely support in their work; Some are caused by unreasonable measures and methods when dealing with dangerous rocks; Some are caused by unqualified supporting materials. The main problems of gas accidents are insufficient tile inspection personnel, weak sense of responsibility, untimely inspection, untimely work follow-up and explosion of underground appliances; Dendritic mining in coal mines has not been completely eliminated, ventilation conditions are not very good, and gas is easy to suddenly gather, causing gas accidents. From the analysis, in the final analysis, the accidents are all due to the fact that the direct operators did not follow the operating rules of coal mine safety production, or the enterprises did not formulate practical, detailed and scientific operating rules, which led to the employees having rules to follow, the enterprise managers being seriously irresponsible, and their own basic conditions being poor, which led to frequent accidents.
4. From the time analysis of the accidents, of the 25 accidents, only 3 accidents occurred before 10:30 am (including 10:30 am), while 22 accidents occurred after 10:30 am, that is to say, the on-site management personnel in the enterprise had to leave work, or It shows that the on-site management responsibility of the enterprise is not implemented, the supervision is not in place, and the workers take the opportunity to operate illegally. This is what we ignored before summarizing and analyzing the accident.
5. According to the analysis of accidents every year, the accidents occurred most in 20__ years in three years, that is, the coal industry has obvious benefits, and safety accidents are prone to occur when grabbing output and competing for benefits, which shows that business owners still have the old problem of emphasizing production and neglecting safety.
Third, countermeasures
1, further improve the understanding of coal mine safety production and firmly establish the idea of safety first.
Coal mine safety production is related to the safety of people's lives and property and the overall situation of reform, development and social stability. Doing a good job in coal mine safety production, effectively ensuring the safety of people's lives and property, embodies the fundamental interests of the overwhelming majority of people, and embodies the development requirements of advanced productive forces and the direction of advanced culture. Doing a good job in production safety is an important content of building a well-off society in an all-round way and coordinating the all-round development of economy and society. This is an important part of implementing the sustainable development strategy, and it is also the basic requirement for the government to fulfill its social management functions. All departments at all levels in the county must regard safety production as a long-term and arduous task, wake up the alarm bell and make unremitting efforts to overcome the psychology of war-weariness, paralysis and luck, fully understand the great significance and practical urgency of strengthening coal mine safety production from the perspective of comprehensively implementing the important thought of "_ _" and ensuring the safety of people's lives and property, and mobilize all social forces to make concerted efforts from the perspective of comprehensively implementing the spirit of the 11th Party Congress and the government work report. In particular, all coal mining enterprises should firmly establish the idea of safety first, and strive to improve the safety management level of enterprises and the quality of employees from the aspects of safety production investment, education and training, and on-site management, so as to truly achieve safety production and reduce the occurrence of casualties.
2, resolutely implement the State Administration of Work Safety Order No.5, and strive to improve the level of coal mine safety production.
Order No.5 of the State Administration of Work Safety defined the basic conditions for safe production in coal mines. Because most coal mines in our county exploit extremely thin coal seams, the layout of shafts and lanes is unreasonable, and the equipment and facilities for improving transportation, mining and ventilation are relatively backward. Although the company stopped production and rectified last year, the company has not changed much. To this end, the county coal, safety supervision departments and coal-producing towns and villages further strengthen the supervision and management of coal mine safety, and urge coal mining enterprises to further increase investment and comprehensively upgrade their software and hardware facilities, especially transportation, ventilation and drainage facilities, in accordance with the requirements of Order No.5 of the State Administration of Work Safety. At the same time, we must resolutely overcome local protectionism, resolutely close those that do not meet the requirements, and strive to change the conditions for safe production in enterprises.
3, pay close attention to safety training, and strive to improve the safety awareness of enterprise managers and employees.
At present, the problems existing in coal mine safety production are mainly manifested in the enterprise's
Managers lack safety knowledge, make many mistakes in specific safety production management, and can't make arrangements for specific scientific according to the actual situation of coal mines, while employees' quality is low, their awareness of self-protection is poor, and the phenomenon of "three violations" is serious. Therefore, it is particularly important to do a good job in safety training for enterprise managers and employees. First, the competent department of coal mine industry and the comprehensive supervision and management department of county safety production should strengthen the training of the main responsible persons, safety management personnel and special operations personnel of production and business units according to law, and strengthen the publicity and education of the Safety Production Law and other laws and regulations on coal mine safety production, so as to unify the qualifications with the actual management level and truly improve the safety management level of coal mine management personnel; Second, coal mining enterprises themselves should strengthen the training and education of their employees, especially according to the actual situation of their respective coal mines and the operating procedures, so that workers can really be familiar with the underground development and layout, and truly abide by the rules and regulations, do not operate illegally, and ensure production safety. Thereby reducing the occurrence of casualty accidents.
4. Strictly implement various systems to reduce the occurrence of casualty accidents.
The responsibility of production safety is more important than Mount Tai, so it must be strictly managed to reduce the occurrence of casualties. We should conscientiously sum up the successful experience of coal mine safety production in recent years, but also see our weak links, especially the gap in system implementation. So do it well (1). Enterprises should, according to the actual situation of coal mines, further formulate and improve the rules for coal mining operations, strengthen the responsibilities of relevant managers according to the requirements of the rules, and truly operate according to the rules. (2) All production enterprises should formulate and implement various rules and regulations in accordance with relevant laws and regulations, and truly achieve "daily monitoring, weekly report and monthly analysis", that is, "daily monitoring": the on-site management personnel of enterprises should monitor and manage every production link and every production process every day, find and correct all kinds of violations in time, and ensure that workers do not go down the well and management personnel do not leave work. Change the problem that managers only work half a day, or don't follow the class. At the same time, the daily work should be recorded in writing and reported to the relevant mine leaders. "Weekly Report": The deputy mine manager in charge of safety production shall timely sort out and summarize the weekly work situation and report it to the mine manager, relevant competent departments and township people's governments. "Monthly analysis" means that the mine manager of an enterprise should call relevant personnel to make a careful analysis of the safety production situation in the current month, put forward rectification opinions on the existing problems, and arrange the work for the next month to truly achieve safety production. (3) Establish a strict safety inspection system and make every effort to rectify potential safety hazards. On the one hand, enterprises should pay attention to safety production, not only to strengthen the investment in hardware and equipment for safety production, but also to pay special attention to the daily inspection of safety production, especially the ventilation and gas management of underground mining docks, blind alleys and abandoned alleys, the treatment of dangerous rocks in underground transportation alleys and working faces, and the early warning of floods. And formulate strict preventive measures to ensure production safety. On the other hand, the relevant departments at the county level, especially the persons in charge of the jurisdiction of the Coal Bureau and the people's governments of coal-producing towns, should strengthen the daily safety inspection of coal mines, focusing on checking whether the mining operation procedures of enterprises are reasonable, whether the ventilation equipment and facilities are perfect, whether the underground site management personnel are in place, whether the special operators are fully equipped, whether the various rules and regulations are established and sound, whether the safety production plan is formulated, whether the underground mining layout is reasonable, correcting problems in time when found, and making plans for major hidden dangers to ensure timely rectification.
The above is what Bian Xiao shared today, and I hope it will help everyone.