Current location - Quotes Website - Signature design - Commitment letter of enterprise safety production
Commitment letter of enterprise safety production
Four commitments of enterprise safety in production

In our daily life, we use letter of commitment more and more, and the letter of commitment must be within the validity period of the offer. I believe many people will find it difficult to write a letter of commitment. The following are four commitments for enterprise safety production that I have compiled. Welcome to study and reference. I hope it helps you.

Enterprise Safety Commitment Letter 1 Party A: (Employer)

Party B: (Contractor)

In order to strengthen the management of minor repairs and maintenance of national and provincial trunk highways and their ancillary facilities, and make them always in a good technical state, according to the Operating Rules for Fine Maintenance Management of xxx Highway Bureau and the regularity and particularity of minor repairs and maintenance of highways; In order to accomplish one or more of the following tasks and clarify the responsibilities, rights and obligations of Party A and Party B during the operation, Party A and Party B reached an agreement through consultation.

1. Term of validity of the agreement: from the date of the month to the date of the month.

Second, the scope and content of work:

Scope of work: national highways and provincial highways within the jurisdiction of xxxxxxx;

The work contents are as follows: (specific work place, content, start-up and completion time, quality requirements, etc. The notice of commencement shall be issued by Party A and attached to this Agreement).

(1) subgrade

1, maintenance items:

(1) Arrange shoulders and slopes, remove sundries and keep the road surface clean and tidy;

(2) Dredge ditches and keep the drainage system unblocked;

(3) Remove weeds in retaining walls, slopes and guardrails, clean expansion joints, dredge drainage holes and loosen stones;

(4) Repair of mortar trench and GBM block.

2. Minor repairs

(1) Excavate side ditches, intercepting ditches or laying side ditches by stages;

(2) Remove sporadic landslides, fill gaps in subgrade, and deal with slight subsidence and frost boiling;

(3) Handling of bump at the top of bridge head and culvert;

(4) Repair the local damage of retaining wall, slope protection, slope protection road, drainage ditch, guardrail or anti-ice and snow facilities;

(5) locally reinforce the shoulders.

(2) Pavement

1, maintenance project

(1) Remove dirt and sundries on the road surface and keep the road surface clean and tidy;

(2) Remove road water, snow and smoothies, spread anti-skid materials, dust suppressants or compact snow to keep traffic smooth;

(3) Treatment of asphalt pavement diseases such as flooding, expansion, cracks and looseness;

(4) Repair and painting of kerbs.

2. Minor repairs

(1) Handling of vehicle bump at bridge head and culvert top;

(2) Repairing potholes, subsidence, controlling waves, local cracks, gnawing edges and other diseases of asphalt pavement;

(3) Cleaning, filling and plugging of cracks in cement concrete pavement, and local repair of plates.

(3) Bridges and culverts

1, maintenance project

(1) Remove silt, snow, accumulated water and sundries and keep the bridge deck clean;

(2) dredge culverts, channels under bridges and sediments;

(3) Maintenance of expansion joints, dredging of drainage holes, adding lubricating oil to steel bearings and painting of railings;

(4) Daily maintenance of bridges and culverts.

2. Minor repairs

(1) local repair, replacing bridge railings and repairing drainage holes, with slight damage to expansion joints, brackets and deck;

(2) Repairing minor damage to piers and slopes;

(3) Reinforcement treatment of culvert import and export paving;

(4) Local maintenance of the channel, dredging and repairing the drainage ditch.

(4) Facilities along the route

1, maintenance project

(1) signs, milestones,100m piles, boundary pillars, delineator, fences, etc. Buried, maintained or cleaned and painted regularly.

2. Minor repairs

(1) guardrail, isolation fence, delineator,; Repair, paint or partially replace signs, milestones,100m piles and boundary markers;

(2) Local marking of pavement markings.

(5) Greening

1, maintenance project

(1) Tending, budding, pruning, pest control and fertilization of street trees and flowers;

(2) Seedling raising, pest control, fertilization and weeding in the nursery.

2. Minor repairs

(1) replanting of street trees and flowers;

(2) Paint street trees.

(6) Other projects

Other projects arranged by Party A according to the needs of maintenance projects.

Third, minor repairs and maintenance quality objectives

The quality requirements of highway maintenance and minor repairs meet the following standards:

(1) subgrade maintenance should keep the subgrade solid, the slope stable, the drainage unblocked, the dimensions and slopes of each part meet the design requirements, and the highway alignment is suitable. Through maintenance and management, its quality is not lower than the original design standard;

(2) Pavement maintenance must ensure that the pavement has no serious diseases that affect traffic safety, keep the flatness intact and the transverse slope moderate, ensure the driving performance of the pavement and prolong the service life;

(3) Bridges and culverts must first meet the requirements of load grade, ensure the traffic of vehicles and ensure that all parts are in good working condition; Dredge the riverbed in time to ensure the smooth flow of water;

(4) Maintain the facilities along the line, clean up and repair local defects in time, and keep them in good technical condition;

(5) The greening project should be replanted, trimmed and maintained in time;

(6) If there is no corresponding standard basis, it shall meet the technical requirements put forward by Party A before the project starts.

Four. Responsibility of both parties

(I) Party A's responsibilities

1, responsible for the formulation and management of maintenance contracts;

2. Be responsible for arranging and scheduling Party B's work;

3. Be responsible for the business guidance and work assessment of Party B;

4. Be responsible for the inspection and daily inspection of Party B's maintenance work;

5. Be responsible for the management and measurement payment of maintenance funds.

(II) Party B's responsibilities

1. The management and staff of Party B shall be employed by Party B, and shall be responsible for the payment of wages and labor benefits. During the contract period, Party B's management and staff shall abide by national laws and regulations, consciously abide by Party A's rules and regulations, and cooperate with the work arrangements of Party A's management;

2. Party B must complete relevant tasks on time, with good quality and quantity according to Party A's requirements;

3. Party A has the right to put forward rectification requirements according to the work content and quality of Party B, and Party B shall actively negotiate with Party A and make corresponding adjustments according to the negotiation results;

4. Party B shall complete all tasks assigned by Party A in strict accordance with national laws and Party A's rules and regulations, ensuring smooth, safe, comfortable and beautiful;

5. Party B shall pay the employee's salary on time and shall not default. At the same time, Party B shall do a good job in the safety management education of employees and pay the corresponding insurance.

Commitment letter of enterprise safety in production 2 For the sake of personal safety and health, family happiness, stable development of enterprises and prevention and reduction of production safety accidents, I solemnly promise to strictly perform the following duties and obligations in my work:

1. Before taking up the post, I have received three-level safety education for new workers, safety production discipline education, Safety Production Operating Rules for this type of work, and various safety and public security management regulations and rules and regulations education.

2. Keep in mind the safety production policy of "safety first, prevention first, comprehensive treatment", consciously perform the safety responsibilities of this post, adhere to safety first when there is a contradiction between production and safety, and achieve: people-oriented, safety first.

3. Enhance self-awareness: I will do "I don't hurt others, I won't be hurt by others, I won't hurt myself" in my work. Do not engage in activities unrelated to work during working hours.

4. Abide by the laws, regulations, rules and regulations of fire control management, actively learn the knowledge of fire fighting and fire escape, be familiar with the use methods and escape routes of various fire-fighting equipment, master the emergency measures of various accidents in this position, and handle abnormal situations in time without delay.

5. Take the initiative to stop colleagues' unsafe behaviors, and immediately report to the on-site safety production management personnel or the person in charge of the unit when discovering potential accidents or other unsafe factors.

6. Work in strict accordance with the company's post (or type of work) safety technology operating procedures, conscientiously implement post operation cards, process regulations and work instructions, so as not to command or operate illegally, violate labor discipline, resist illegal command and correct illegal behavior.

7. Work with certificates (safety operation certificate, special operation personnel qualification certificate), keep the job site standardized and standardized, and put an end to the phenomenon of "running, running, dripping and leaking".

8. Dress for work according to regulations, wear labor protection articles, enter the production area without fire, do not smoke in no-smoking places, and strictly abide by the five systems of employee production management assessment. (Wall-mounted system)

9. Actively participate in all kinds of safety training and safety learning, safety activities and accident emergency drills organized by the company, master the knowledge of safety production required by the industry, improve safety production skills, and enhance the ability of accident prevention and emergency handling.

10, be loyal to their duties, strictly fulfill the responsibility for production safety, and implement the "one post and two responsibilities system". (One post and two responsibilities are to perform safety responsibilities while performing task responsibilities)

I consciously abide by the above commitments, and I am willing to take responsibility if I violate them.

Commitment: XXX

Time: XXXX, xx, xx, xx, xx.

Enterprise Safety Commitment 3 In order to ensure food quality and safety, and ensure people's health and life safety, our unit solemnly promises:

1. The production site should be kept clean, with dust-proof, rat-proof and fly-proof facilities. No pollution sources (toilets, animal pens, etc.). ) near the place of origin. Employees should hold health certificates and wear work clothes, working caps and masks when working.

Second, the production and processing of tofu is commissioned for inspection. Tofu is used to meet the needs of people in surrounding villages.

Three, strictly control the raw and auxiliary materials into the factory, the implementation of raw and auxiliary materials acceptance system, the types of raw and auxiliary materials used are consistent with the express content.

4. Don't adulterate tofu, shoddy it, and pass unqualified products off as qualified products; Do not use non-food raw materials, recycled food, moldy and deteriorated raw materials to process tofu.

5. Food additives shall not be used or abused in violation of state regulations, and the additives used shall be filed with the Bureau of Quality and Technical Supervision.

Six, do not forge or use other people's factory name and address, do not forge or use quality marks.

Seven, the use of clean and safe storage containers, in line with relevant national laws and standards.

Commitment enterprise:

Legal representative:

20xx year x month x day

Enterprise Safety Commitment Letter 4 Enterprise Employees Safety Commitment Letter 1

I solemnly promise to do the following in my future work:

1, perform post safety responsibilities, be responsible for enterprise safety, be responsible for department safety, be responsible for employee safety and be responsible for your own safety.

2. Consciously abide by various safety management laws, regulations and rules of the state, industry and company (unit), obey management, wear and use labor protection articles correctly, fight against the three enemies of "violation of regulations, paralysis and irresponsibility" and strive to "do not hurt yourself, others and others".

3. Abide by the laws, regulations and rules of safety management, do not drive fatigue, do not drink and drive, do not lend vehicles to people without driver's licenses, and do not use mobile phones or read information while driving.

4. Abide by the laws, regulations, rules and regulations of fire control management, actively learn the knowledge of fire fighting and fire escape, and be familiar with the use methods and escape routes of various fire fighting equipment.

5. Do not command or operate illegally in daily work, and do not violate labor discipline or work blindly.

6. Consciously accept the safety disclosure and technical disclosure of companies (units), departments and teams, and consciously implement various safety measures required by the safety disclosure and technical disclosure, so as not to take any chances.

7, take the initiative to stop the unsafe behavior of colleagues, found hidden dangers of accidents or other unsafe factors, immediately report to the site safety production management personnel or unit head; The person who receives the report shall deal with it in time.

8. Actively participate in all kinds of safety training and safety learning, safety activities and accident emergency drills organized by the company, master the knowledge of safety production required for operation, improve safety production skills, and enhance the ability of accident prevention and emergency handling.

Commitment: type of work:

Commitment time: year month day

Enterprise employees' commitment to work safety II

For the sake of personal safety and health, the happiness of my family and the stable development of the enterprise, I voluntarily sign and abide by the following commitments in my work:

1. Before taking up my post, I received three-level safety education for new workers, safety production discipline education, HSE management system education, Safety Production Operation Rules for this type of work and various safety and public security management regulations and rules and regulations education.

2. Before taking up my post, I have received the qualification training for hazardous chemicals practitioners, safety management personnel or special equipment held by the safety supervision department, and I have been certified to take up my post.

3. Keep in mind the safety production policy of "safety first, prevention first", consciously perform the safety responsibilities of this post, and insist on safety first when there is a contradiction between production and safety, so as to achieve: people-oriented, safety first.

4. I voluntarily accept the safety inspection and supervision of the superior leaders and security personnel, and consciously accept the closed and semi-military management of the oil depot without violating the basic rights of citizens stipulated by relevant national laws and regulations.

Commitment letter for safety production of enterprise employees

5, in the work, consciously abide by national and local laws and regulations, consciously abide by the company and the oil depot management system and regulations on safety in production. Do not violate the safety operation rules, and consciously abide by the Regulations on Warehouse Management. , consciously and correctly use personal labor protection articles and safety protection appliances.

6. Enhance self-awareness: I will do "I don't hurt others, I won't be hurt by others, I won't hurt myself" in my work. Do not engage in activities unrelated to work during working hours.

7. Abide by the laws, regulations, rules and regulations of fire control management, actively learn the knowledge of fire fighting and fire escape, be familiar with the use methods and escape routes of various fire-fighting equipment, master the emergency measures of various accidents in this position, and handle abnormal situations in time without delay.

8. Do not command or operate illegally in daily work, and do not violate labor discipline or work blindly.

9. Take the initiative to stop the unsafe behavior of colleagues, and immediately report to the on-site safety production management personnel or the person in charge of the unit when discovering hidden dangers of accidents or other unsafe factors; The person who receives the report shall deal with it in time.

10. Actively participate in various safety training, safety learning, safety activities and accident emergency drills organized by the company, master the knowledge of safety production required for operation, improve safety production skills, and enhance the ability of accident prevention and emergency handling.

I consciously abide by the above commitments, and I am willing to take responsibility if I violate them.

This letter of commitment shall come into effect as of the date of signing.

Organizer (signature): type of work: department:

Head of department (signature):

20xx year month day

Commitment letter for safety production of enterprise employees III

In order to ensure the company's safe production and personal occupational safety and health, and not to make the interests of enterprises suffer losses and personal physical and mental injuries, I promise to do the following:

1. Seriously implement the safety production policy of "safety first, prevention first and comprehensive treatment", strictly abide by national laws and regulations and the company's various safety production systems and management regulations, and achieve "no harm to yourself, others and others".

Second, actively participate in various safety activities organized by the company, consciously accept safety education and skills training at all levels of the company, departments and teams, and strive to improve their own safety awareness and work technology level.

Three, be loyal to their duties, strictly fulfill the responsibility of production safety in this position, and implement the "one post and one responsibility system". Master job safety skills, understand job hazards, and take preventive measures and emergency methods.

Four, consciously abide by the "electric power safety regulations" in the work, and seriously follow the safety requirements of the regulations. No illegal command, no illegal operation, no violation of labor discipline, resist illegal command and correct illegal behavior.

5. Dress for posts according to regulations, wear and use labor protection articles correctly, and use and maintain the safety protection facilities of this position as required.

6. Enter the production area without fire, do not smoke in the non-smoking area, and strictly abide by the fire and explosion prevention and vehicle safety regulations.

Seven, do show certificates, alarm, self-help, mutual rescue, skilled use of fire hydrants, fire extinguishers, gas masks and other fire control facilities.

Eight, strictly implement the provisions of "two tickets and three systems", put an end to the operation without tickets, and conscientiously do a good job in patrol inspection, regular equipment switching and testing.

Eight, actively participate in the accident hidden danger inspection and rectification work, found in the work of accident hidden danger or other dangerous factors, immediately report to the superior, and cooperate with the team and department to solve.

Nine, found production safety accidents, timely report, and actively participate in accident emergency rescue work, obey the superior command in the rescue.

10. If you can't abide by the laws and regulations or work illegally, you will be punished by the company according to the Management Measures for Rewards and Punishment in Work Safety and other relevant rules and regulations, including economic punishment, waiting for posts, transfer to other posts, and being laid off until the labor contract is terminated.

Commitment (signature):