The following content applies to the second-generation Changan Eado (2018 model).

1) Touch the button

After the user switching pop-up interface appears, this button is marked as the current driver mode and can be associated with the key.

2) Touch the button

The following pop-up box interface will appear:

Note: Touch the following 3 buttons:

Proceed in sequence The operations are return, delete signature, and save signature.

3) Slide the button left or right

to switch between different driver and guest information.

4) Touch the button

The following pop-up box interface will appear:

Note: Touch the button

to jump to the setting interface; Touch the button

to jump to the vehicle settings interface.

The prompt bar at the top of the interface

Wi-Fi connection prompt is displayed after WiFi is turned on, and the signal strength is also displayed.

Bluetooth connection prompt, displayed after Bluetooth is turned on, and the connection status is also displayed.

Battery prompt, showing the remaining battery level in the prompt bar.

Drop-down menu interface

Pulling down the status bar will display the drop-down menu interface. Press and hold the button in the picture below and drag upward to collapse the drop-down menu interface. The drop-down menu has two interfaces: switch and information.

The switch menu can quickly operate the switch status of WiFi and Bluetooth, or directly set the volume and brightness.

Note: "Navigation volume" only appears when the navigation function is installed, and the navigation function is optional.