About how to write a safety responsibility letter

In the real society, the frequency of use of responsibility letters is on the rise. A responsibility letter is a document that states the scope of responsibility and responsibilities, and is mostly used in parallel. I believe that many friends are very distressed about drafting a responsibility letter. Below is my carefully compiled guide on how to write a safety responsibility letter. You are welcome to learn from and refer to it. I hope it will be helpful to everyone.

How to write a safety responsibility letter 1

Adhere to the principle of "people-oriented, safety first", conscientiously implement the instructions of superiors on safety work, and actively carry out activities to create a "safe campus", To effectively ensure the safety of teachers and students and prevent the occurrence of various accidents, Xiaosi Middle School has signed the following comprehensive safety management target responsibility letter with the person in charge:

1. Job Responsibilities

( 1) Establish a safety work leading group to be responsible for school safety education, safety inspections, and investigation of safety hazards, etc., to ensure that school safety education work is organized, led, systematic, and implemented.

(2) Establish and improve the safety system. The safety system must be posted on the wall. At the same time, publicity and education should be strengthened, teachers and students should be regularly organized to study, and safety knowledge education such as fire prevention, waterproofing, anti-virus, anti-electricity, and anti-theft should be strengthened. Safety awareness and self-protection awareness should be enhanced, and preventive measures should be strengthened to nip problems in the bud.

(3) Strengthen traffic safety management. We should do a good job in traffic safety education for teachers and students, so that students consciously form groups when going to and from school, and ride in a civilized manner. When students go out to participate in activities organized by the school, they are not allowed to rent vehicles with incomplete documents or in poor condition. It is strictly prohibited to hire unlicensed and unskilled drivers.

(4) Strengthen school building safety management. The school buildings and various educational and teaching facilities, living facilities, etc. should comply with the architectural design standards and relevant safety regulations. It has complete functions such as fire prevention, anti-theft, waterproof, and lightning protection. There must be complete lighting facilities. Pay attention to monitoring and conduct regular inspections, especially during the rainy season and winter and summer vacations. Special personnel should be organized to conduct safety inspections of school teaching buildings. If dangerous buildings, rooms, walls, and toilets are found, repair them or stop using them in a timely manner.

(5) Strengthen fire safety management. In accordance with the provisions of the Fire Protection Law, we must cooperate with the fire department to conduct regular inspections of school facilities, and promptly eliminate all types of fire hazards discovered. In key fire prevention places such as school classrooms, laboratories, libraries, corridors, etc. where people are densely populated, all types of fire protection facilities and fire protection equipment must be complete. Obstacles are not allowed to be stored in safe passages such as foyers, corridors, and stairs, and evacuation instructions are set up.

(6) Strengthen the safety management of large-scale social activities and on-campus collective activities. When organizing students to participate in various large-scale activities, unsafe factors should be investigated and preventive measures and emergency plans should be put forward. Corresponding safety education must be conducted before going out, and school leaders and sufficient teachers must be provided to lead the team. When organizing group activities in the school, each class must do a good job in student management and strictly enforce the leave system. No student may leave the team at will without the permission of the class teacher.

It is necessary to strictly manage the team, bring them out and bring them back in the required order, and it is strictly forbidden to bring them indiscriminately to prevent crowding and trampling accidents.

(7) Strengthen sports safety management. Strengthen the management of sports venues, equipment, and activities. Venues and equipment must be inspected frequently, repaired in a timely manner, and hidden dangers eliminated. In physical education classes, physical activity classes and athlete training, coaches must be responsible and responsible to ensure the safety of students. Conduct regular physical examinations on students and establish student health records. When organizing strenuous exercise for students, those who are sick, weak and unwell should be prohibited from participating.

(8) Strengthen school safety and security. Establish a day and night duty system, and have dedicated personnel on duty during weekends and holidays. Strengthen security management and prohibit irrelevant personnel from entering the campus. Carry out anti-theft work in special rooms, including financial room, computer room, electronic classroom, language room, laboratory, multimedia classroom, main control room, audio, sports and art equipment room, etc. Strengthen the patrol system and immediately report major incidents that disturb campus security to the public security department.

(9) Strengthen environmental management around schools. Regularly supervise and investigate the situation around the school, and promptly eliminate various security risks that hinder the order around the school and the safety of students.

(10) Establish a major accident reporting system. Major safety incidents must be reported to the principal in a timely manner. Those who fail to report or delay reporting will be dealt with seriously once investigated.

2. Assessment

(1) The assessment period is one year.

(2) Submit a written report to the principal within half a month before the end of each semester.

3. Rewards and Punishments

(1) Safety production is linked to the annual assessment of the responsible person.

(2) If a responsible accident occurs, the person responsible shall not be rated as an outstanding teacher and shall be dealt with appropriately according to the reasons for responsibility.

(3) If no safety accidents occur, certain rewards will be given.

This letter of responsibility is made in duplicate, with each party holding one copy.

School person in charge (signature) ________ Responsible person (signature) ________

How to write a safety responsibility letter on the year, month and day 2

Company safety responsibility letter is to strengthen The company's safety management ensures the personal and property safety of guests and employees of the company. In accordance with the relevant provisions of the "Fire Protection Law" and the "Regulations on Social Security Prevention Responsibilities of Shenzhen City" and the working principle of who is in charge and who is responsible, combined with the actual situation of our company, This letter of responsibility is specially formulated.

This letter of responsibility is signed by the managers of each department of the company and the company. The leaders of each department should break down the contracted information and implement it to the grassroots teams and employees, and do a good job in signing contracts between their departments and teams and employees. The leaders should personally take charge of the contract and manage it in detail. They should grasp every level, take responsibility at every level, and make it clear and comprehensive. The tasks and goals of governance are to create a good order of business, work and life.

1. Qualifications of Department Safety Responsible Persons

The managers of each department of the company are the safety responsible persons of their departments.

II. Responsibilities of the safety responsible person

1. Strictly abide by relevant laws and regulations, and be in charge of the safety prevention work of the department in accordance with the safety prevention management requirements of the public security, fire protection, culture and other departments. .

2. Formulate safety prevention goals and measures for the department, refine the responsibility system, and implement requirements to teams and individuals.

3. Supervise and inspect the implementation of safety prevention objectives of each team under the department, be responsible for the implementation of rectifications of hidden dangers discovered, and propose rewards and punishments to relevant responsible persons.

4. Safety work and production operations must be planned, arranged, inspected, summarized, and evaluated in the same way.

5. Responsible for formulating and implementing safety prevention education management and training plans for employees in each team and group of the department.

6. Participate in special safety activities organized by the safety department and other relevant departments on time, and often truthfully report the safety situation of the department to the company's functional departments.

3. Safety prevention objectives

1. The safety order of this department is stable and good, and guests and employees generally feel safe.

(1) There will be no criminal cases, general public security cases or fire accidents that can be filed, and no valuables or large amounts of cash or securities will be stored in the office or locker.

(2) There are no major criminal cases, major public security cases or major fire accidents caused by improper prevention or management.

(3) Employees actively assist the Ministry of Security and Public Security Bureau in investigating and handling petty theft, gambling and other various accidents and cases that disrupt the internal order of the enterprise, resolutely ban and crack down on illegal activities expressly prohibited by laws and regulations, and operate The place is in good order.

(4) Keep fire safety evacuation channels open and do not pile up debris.

(5) Keep fire-fighting equipment clean and intact, and have a dedicated person responsible for it.

2. Combined with the characteristics of the headquarters, establish, improve and implement various safety prevention systems.

(1) Conscientiously implement the company’s requirements for strengthening safety management, and ensure that each position and position has a safety prevention responsibility system in place.

(2) Departments, teams, and individual safety prevention responsibilities have signed contracts, and the contract signing rate has reached 100%.

(3) Regularly inspect and supervise the safety prevention work of your team.

(4) In business activities, there are safety prevention responsibility system contracts with contracting and leasing places (units), and the contract signing rate reaches 100%.

3. Regularly provide legal, professional ethics and safety education to employees.

(1) Closely grasp the ideological trends of employees in the department, and promptly eliminate and deal with unsafe (unstable) factors.

(2) No illegal crime involving security detention or above occurs among employees.

IV. Assessment

1. This letter of responsibility will be randomly inspected and assessed by the company's safety leadership group or the security department in conjunction with relevant departments.

2. If major duty accidents and cases occur due to intentional or negligent behavior of safety personnel, in addition to necessary economic sanctions, the responsibilities should also be investigated in accordance with the law.

3. The Safety Department is responsible for summarizing and reporting the implementation of this Letter of Responsibility to the company’s deputy general manager’s office. The departmental safety responsible person should report the implementation of the Letter of Responsibility in writing to the Company’s Security Department every six months.

4. This letter of responsibility will take effect after it is signed and sealed by the company and the department’s security personnel. The letter of responsibility is in duplicate, with the contracting department and the security department each holding one copy. If a new safety contract is not fulfilled upon expiration of the contract period of this responsibility letter, this responsibility letter will be automatically renewed.

5. The Safety Department is responsible for the interpretation of this letter of responsibility. If there is any conflict with laws, regulations or the provisions of superior authorities, the laws, regulations or provisions of superior authorities shall prevail.

5. Rewards and Punishments

1. The company sets up a safety prevention award. For those who have achieved remarkable results in completing safety prevention goals, the company will give appropriate rewards to department safety personnel according to the situation.

2. If major accidents or cases occur due to failure to perform safety precautions conscientiously and fail to achieve safety prevention goals, in addition to being held accountable in accordance with the law, the persons responsible for safety duties should also be given necessary economic sanctions and Administrative penalties.

Shenzhen Chuangqixin Business Development Co., Ltd.

Safety Responsible Person (Signature)

Year, Month, Day

Department Safety Responsibilities Person (signature)

How to write a safety responsibility letter on the year, month and day 3

1. Conscientiously implement the "Work Safety Law of the People's Republic of China" and firmly establish the " The safety work policy of "Safety First, Prevention First, Comprehensive Management" is to be loyal to one's duties and not to take risks and neglect one's duties.

2. Really perform the safety work responsibilities of this position, enhance the concept of law and discipline, consciously abide by rules and regulations, proceed from safeguarding national interests and collective interests, obey management, and implement compliance with rules and regulations and operations according to rules into specific operational activities middle.

3. Consciously accept safety production education and training, master the safety production knowledge required for your job, improve safety production skills, and enhance accident prevention and emergency response capabilities.

4. Be familiar with the safe operating procedures and safety skills of your job, and achieve "five understandings": understand the location of special dangerous places (locations) of your job; understand that the workplace (location) of your job is toxic Hazardous factors; understand the safety matters that must be observed in the workplace (location) where one works; understand the emergency rescue handling requirements in the workplace (location) where one works; understand how to use protective facilities in the workplace (location) where one works .

5. Strictly abide by the unit’s production safety regulations and operating procedures, and wear and use labor protection equipment correctly.

6. The alarm bell is always ringing for safe production, and we must constantly improve safety awareness to ensure that I do not harm myself, do not harm others, and do not get harmed by others.

7. If you discover potential accidents or other unsafe factors, report them immediately to the construction management personnel, actively do a good job in rectifying hidden dangers in the workplace (location) where you work, and consciously care for and use safety protection devices correctly. , safety signal devices, safety signs and other safety devices.

I promise

I have received job safety education and training, understand the hazards and preventive measures that exist in my job (workplace), and am familiar with the safety production responsibility commitment letter Regarding the relevant content, we are willing to strictly abide by the unit's safety production rules and regulations and operating specifications, and obey management. If we violate this commitment, we are willing to bear corresponding responsibilities.

Responsible person:

Date: __month__, 20xx How to write a safety responsibility letter 4

In order to further strengthen the company's safety production management and ensure The company operates safely. According to relevant regulations, the company signed a "Work Safety Responsibility Letter" with its employees to implement safety responsibilities to each employee. The information on their responsibilities is as follows:

1. Safety work must be done at all times Adhere to the policy of safety first, prevention first, and comprehensive management, work hard to learn business and safety knowledge, and continuously improve their business skills.

II. Safety requirements

1. Strictly implement the national, superior and company safety management systems, consciously understand safety education and training, and have the ability to identify and control hazards related to the job. , be proficient in accident prevention measures and accident emergency response plans, and master the safety knowledge and safety skills of their own jobs; for those who are required by the state to obtain a professional qualification certificate before taking up the job, they should obtain the corresponding professional qualification certificate in advance before taking up the job.

2. Obey the company’s management, conscientiously perform safety responsibilities, care for, help and supervise each other, and stop illegal and risky behaviors; conduct safety inspections according to relevant regulations and responsibilities of the position, and discover potential accident hazards and major dangers, Reports should be made promptly and effective measures should be taken.

3. Be familiar with the safety, sanitation and fire-fighting facilities, equipment and equipment parts related to this position, master their use, and maintain them according to regulations.

4. When an accident occurs, take effective measures in a timely manner to avoid further expansion of the accident, report in a timely manner, and protect the accident site and relevant records and other information.

2. Goals:

1. Ensure the work quality, safety, environmental protection and occupational health and safety of the position and zero accidents.

2. According to the plan, the rate of voluntarily participating in learning and training is over 95%.

3. Assist other departments or employees to complete tasks with a rate of more than 95%.

3. Reward and Punishment Methods:

1. During the year, the company will assess the above goals. Those who meet the goal requirements will be commended and rewarded; if the goal requirements are not met, the company will consider the severity of the case. Penalties will be imposed in accordance with relevant regulations.

2. If there are major safety hazards in the position due to personal incompetence, dereliction of duty, etc. that cannot be rectified in a timely manner or cause safety accidents, the company will be punished in accordance with relevant regulations and procedures; if this constitutes a crime , pursue criminal responsibility in accordance with the law.

4. This letter of responsibility is made in duplicate and shall be implemented from the date of signature.

Signature of the department head: Signature of the responsible person:

Date: Year, month and day Date: Year, month and day How to write a safety responsibility letter 5

For further implementation Based on the policy of safety first and prevention first, we will strengthen safety management to ensure the smooth progress of project construction and production and the happiness of the employees' families. After negotiation between both parties, this safety responsibility letter was signed.

Article 1: Both parties signing a letter of responsibility:

Party A: Representative: Party B: Representative:

Article 2: Both parties must conscientiously implement safety Production policies and regulations, strengthen safety awareness, improve regulations, strengthen prevention, improve project management, and carry forward the three-dare spirit of dare to manage, dare to catch, and dare to punish, to achieve safety production goals.

Article 3: The period of the safety production responsibility letter: from the entry of construction to the completion of this type of work.

Article 4: Responsibilities and obligations of Party A:

1. Carry out overall arrangement and management of production safety work, be responsible for carrying out daily inspections of production safety, and review any problems found and weak links, and urge rectification within a time limit.

2. Responsible for carrying out civilized construction site and safety production evaluation activities, 100-day safety production and safety knowledge competition activities, timely summary and exchange, and rewarding and punishing the poor.

3. Party A shall promptly respond to the production safety issues raised by Party B or handle and resolve them within three days.

4. Responsible for providing Party B with safety technical briefings before construction and third-level safety education.

5. Timely convey to Party B the spirit of relevant documents on production safety from superiors and local government departments.

Article 5: Party B’s responsibilities and indicators:

1. Prevent serious casualty accidents (including equipment accidents), and control the general accident frequency within 1.

2. Set up a part-time safety officer who is responsible for participating in the safety production activities of the project department and presiding over the safety production work of the team, and establishing a safety ledger in a timely manner.

3. Responsible for providing third-level safety education to new employees, and reasonably matching new and old employees in the team to guide, help and guide new employees.

4. The team members should be relatively fixed, and idle people or unidentified people should not be recruited into the team at will. Personnel without three certificates are not allowed to enter the construction site.

5. It is necessary to conscientiously implement labor protection regulations, pay corresponding wages, equip employees with labor protection supplies, and pay attention to the physical, psychological and ideological dynamics of workers in the team at all times.

6. It is necessary to conscientiously carry out safety activities including three inductions and one evaluation, and provide regular or irregular safety education to employees.

7. Special work must be performed by personnel holding valid certificates in this profession. It is prohibited to operate all equipment and supports of other types of work without authorization. (Such as connecting power, starting up, dismantling the frame, etc.)

Article 6, Rewards and Punishments

1. When a team or individual receives a safety production reward from a superior department or group company, the reward will be All return to the team or individual.

2. Workers who generally violate operating procedures will be punished 20-100 yuan. Anyone who violates the rules more than three times in a month will be dismissed.

3. Workers in special types of work who violate operating procedures will be fined 50-200 yuan, and those who violate the rules three or more times will be dismissed.

4. The construction team should consciously do a good job in cleaning up construction waste and remove construction waste in a timely manner. If they do not obey the instructions of the construction personnel, they will be punished with a penalty of 100-200 yuan. If it affects the next process, it will be fined depending on the circumstances. Penalties ranging from 200 to 1,000 yuan will be imposed.

5. Construction workers must wear safety helmets to work, otherwise they will be fined 50 yuan.

6. It is strictly prohibited to take people on the material hoist. Riders will be fined 200 yuan, and those who turn on the machine will also be fined 200 yuan.

7. It is strictly prohibited to conduct wiring without permission, pull wires indiscriminately, burn electric stoves, etc. If found, the party concerned will be fined 200 yuan.

8. Open defecation (urination) on the construction site is strictly prohibited. If found, those who urinate will be fined 20 yuan, and those who defecate open will be fined 50 yuan, and they must clean up after themselves.

9. When working at heights, it is strictly prohibited to throw debris outwards or downwards. If someone throws debris intentionally, each person will be fined 200 yuan each time. If a safety accident occurs, the parties involved shall bear full responsibility.

10. Scaffolding, protective railings, bamboo fences, safety nets, etc. are not allowed to be removed without authorization. The removal must be approved by the construction technical person in charge. If there is any unauthorized removal, the party concerned will be fined 100 yuan.

11. Take good care of the public safety facilities (firefighting equipment, sanitary equipment, signboards, etc.) on site. If there is any damage, compensation will be based on the price. If there is intentional damage, in addition to compensation for the loss, a fine of 50-50 will be imposed. A fine of 500 yuan.

__. Everyone is responsible for protecting building products (finished products), and no intentional damage is allowed. If found, in addition to compensation for losses, a fine of 100-1,000 yuan will be imposed. In serious cases, the person will be removed from the site and will be held accountable accordingly. Responsibilities.

13. We must abide by disciplines and laws. If anyone is found stealing public property on the construction site, he will be punished twice (a fine of 2-5 times the value of the stolen property). If the amount is larger or the circumstances are serious, he will be handed over to the public security agency for handling.

Article 7: This letter of responsibility is made in two copies, one for each party, Party A and Party B. The signatures of representatives of both parties will take effect until the team has completed the settlement and all have left the site.

Party A: Representative:

Party B: Representative:

Year, month, day;