1, number of seals
A calligraphy work is not as many seals as possible. The function of the seal is similar to the finishing touch. Generally speaking, the number of seals of a work should be less than three.
If there are three pieces, the position is one at the beginning, two at the bottom of the last word, one at the end and one at the name.
If it's two pieces, it's mostly a preface, with a name stamp under the last word of the signature.
If it is one, the name stamp will be affixed under the last word of the signature.
2, the position of the seal
The position of the introduction chapter is not higher than the main content or the first word of the preceding paragraph. Generally speaking, its position is in the middle or upper right part of the first word.
Stamp the bottom of the last word of the signature, and its position must be one word away from the last word, and the second seal must also be at the same distance from the first seal.
There are also some special cases, that is, there is a lot of content in the signature, and there is no place to stamp under the last word of the signature, so the position of the seal can be located to the left of the seal and the signature, but the distance between the two seals must also be kept by one word. Its specific location is generally in the upper left of the last word or two of the signature.
Signing taboo
There are many taboos in signing a contract. Generally speaking, the following situations must be avoided:
1. Put two seals under the last word of the signature. The shapes of seals need to be the same, not square or round; The size of the two seals must be the same, not one big and one small; There must be a word gap between chapters.
2. After signature and seal, no inscription can be made below.
3. It is best to seal the lithograph by hand, but not by machine. The knife method of the seal had better be the same.
4. The size of the inscription font should not exceed the text font. If the inscription position is empty, there should be more inscriptions, and vice versa.
5. If it is a calligraphy work in quadruplicate, its leisure chapter can be covered on the first couplet, and the other triplexers need not be covered.