9 solutions to the problem of V3 being flashed to death:

1.] After flashing the phone with FB, the phone cannot be turned on and the keyboard light is always on. Solution: Use FB to connect to the phone. , click on the patch, disable RSA, and then restart the phone

But this method is effective for some machines!

Uploaded thumbnails

2. Generally, the flash is dead After that, it is recommended to re-flash, or change the software, you can use SM, FB, RSD, PST MFF, or change the version!

First, let’s talk about how to re-flash using SM to enter DOS after the flash is dead. :

Open SM, enter the DOS connection on the phone, hear the ding sound, click search, and it will appear that it is not found. Unplug the cable and plug it in again. After the ding sound, click search and still not found. Then click PC Write and check the boot version to see if there is the BOOT of your phone: 07D0 07E0 0823 0826. If not, try again until the phone BOOT appears. At this time, you can find the file to flash, click < /p>

Writing library, wait for the prompt whether to write to another mobile phone, select No, you can unplug the phone and turn it on!

Uploaded thumbnails

3. After swiping FB If the connection can be made, the method of re-flashing: Open FB to connect to mobile phone DOS, it will show that it is connected, find the flash file, and start!

I occasionally see that some engine oil brushes have no effect after brushing them once, and they have to be brushed 5 to 6 times before they succeed. Yes!

Some friends also flashed the main firmware, language pack, digital signature, etc. at once, and it was successful!

Uploaded thumbnails

4. After flashing and reflashing doesn't work, when the flashing becomes PHONE CODE SIG35:02:, it is recommended to downgrade BOOT. Some people use FB to downgrade but it doesn't work.

You should try to flash with RSD, regardless of your BOOT Regardless of the number, first lower it to 07D0. Some have no response. Lower it a few more times.

The phone behaves as follows: black screen, keyboard light is on, and does not turn on. Then use RSD to flash the lowest version 64R. The phone behaves as follows: The screen is white, the keyboard light is on, and the computer does not boot. ,

Ignore it and just flash a higher version!

This RSD software has been corrected and does not need to be installed. After unzipping, click M The icon can be used!

Uploaded thumbnail

5. The flash freezes, the phone cannot be turned on, cannot enter DOS, and the screen does not respond. Install the flash software PST version 7.2.3 or higher. For higher versions, the specific installation method and

flash method are introduced in the compressed package. The installation is successful, that is, copy the crack patch and paste it into the installed PST folder on the C drive. Then in the PST file

folder on the C drive, double-click PST_uni_patc and the Patch crack patch interface will appear. Click "Next" six times. If it prompts that the crack is successful, open the downloaded PST folder, double-click Triplets

_Workaround_updated1[1].1.exe and click Browse. This software is only used when you cannot enter DOS. If you can enter DOS, please use other flash software to connect.

After successful connection, the words "Motorola P2K" will appear in the Device column below. Click it and the phone will switch to "FLASH state". Now you only need to use "MultiFlashFlex"

Flash. SHX files will do, but please note here that the two programs must open the same flash package, otherwise there will be problems.

Uploaded thumbnails

6. Repair that cannot enter DOS: Connect the mobile phone to the computer, run RepStudio_Demo.exe, select V3 as Phone type

The connection is displayed in the lower left corner (Connected) and then click Repair and wait until the progress bar is completed to display the prompt. (Picture 1)

After you finish walking, you will be prompted to press and hold the *# key on your phone and press the OK button (Picture 2).

Then press and hold *# and click on Click OK, the connection will be displayed again below, and the progress bar will resume walking.

After the walk, the repair of the phone has been completed (Picture 3)

After the repair is completed, press and hold the power button. Let the keyboard light up.

(Sometimes it takes multiple times)

Press *# just like opening FB2.62, and let the software find the phone. Sometimes it is difficult to connect. You can try removing the battery first, and then plug in the data cable.

At this time, press and hold *#. After installing the battery, you can find it. If it still doesn’t work, do it a few more times! Use FB to flash BOOT 07D0, (Picture 4)

< p>After completing the above steps, you can enter DOS and see if BOOT is 07D0

If it matches, it means success. You can continue to flash the all-in-one package and then boot.

If it shows If the information is different, please repeat the above 3 steps

Uploaded thumbnails

7. If you can't enter DOS or flash, I'll teach you how to solve this problem and bring your phone back to life!

1. Run p2k easy tool

2. Take out the battery and put it back again

3. Connect the phone to the computer

4 . In p2k easy tool, select the mobile phone model

5. Select the "Repair" tab and check "Full repair PDS zone (with DSP checksum)"

6. Click " Do Selected Jobs", after a while you should be able to see a window prompting you "repair ok"

7. If you are unfortunately prompted that you failed (repare failed), fully charge the battery from step 1 Repeat

8. Click the "Flash" tab, check "Flash SHX" and make sure the model is correct

9. Double-click the text box next to "flash SHX" to open a Complete all-in-one flashing package

10. Click "Do Selected Jobs" and wait for the flashing to end

11. The phone comes to life again!

Uploaded thumbnails

8. After flashing, the backup cannot be restored, and you cannot enter DOS. It can also save your little V. It is a very compact software! Ramldr

First open the software:

1. Press the "*# power key" to put your phone into BOOT state (it doesn't matter if the screen is black). Open Ramldr and connect your phone to the computer. As shown in the picture, the upper left box shows that your phone has now entered FLASH mode. The lower left corner shows the connection of your phone. For example, Not connect means that the connection is not successful, and "Connected" means that it is connected.

2. Select "send Ramldr" in the menu and open the Ldr_pds file inside.

3. In Base addr, enter 10000000.

In Entry addr, enter 12000000.

4. Click save mem. This is after saving the changes The files are saved as 10000000 files in the Ramldr folder.

5. Open RAMLDR again and make sure the lower left corner shows connected

6. Click send RAMLDR and select ldr.bin

7. Click erase and wait for 5 minutes or so until the message ACKERASE is displayed.

8. Do not disconnect the USB after the erase is completed, or your little V will continue to be connected, but do not unplug the data cable, otherwise the BOOTLOAD file will be lost, and even DOS will be gone, but usually USB can still be connected (sometimes you need to remove the battery or even short-circuit the positive and negative terminals). At this time, NOTconnected may be displayed, please press the power button of the phone.

Okay, now that FLASH cleaning is completed, let’s start rewriting FLASH

9. Fill in 10000000 in BASE ADDR, and it can be the default in ENTRY ADDR

10. Click Send Binary and select the file named 10000000 that you backed up

11. Then wait for 5-8 minutes. A program will be written approximately every second and will be updated continuously until the message box The information inside will no longer be updated. Or after not updating,

you can press RESTART and wait for the small V to shut down automatically. Finally, close Ramldr, open the flash software and start flashing. . . .

Do not disconnect your phone from the computer during the entire process. .

12. Now you can unplug the data cable, unplug the battery, wait a moment, and then put it back on! You can enter the DOS state!

13. Use FB3 to restore your previous backup, and your little V will come alive! !

Some engine oils have the following symptoms:

"Switching to flash mode

ADDR 03FD0000AD

JUMP 03FD0010AE

< p>ACK JUMP,03FD010

010

This indicates that this software cannot be used, please use the 4.5 short circuit method!

Uploaded thumbnails

9.V3’s underlying data: If you have tried various methods and still haven’t succeeded, and you are ready to send KF, just refresh the underlying data