It's easy to number paragraphs. Relatively easy, please refer to the figure.
If the title is numbered, just add the number to the standard floating style.
Question How does word restore the AutoNumber tool-AutoCorrect option-AutoFormat when typing-Just check "AutoNumber List" in the AutoNumber tab when typing.
If you don't want automatic numbering, just remove the tick.
Question: How to avoid automatic numbering in word? Select it, then right-click and select Item Number. -Select None.
Question: How does WORD automatically generate multilevel numbers? 1. Execution Format → Bullets and Numbers → Multilevel Symbols tab.
2. Select the desired list format, and then click OK to return to the document. The first 1 level number will appear before the insertion point.
3. Type the text, press Enter after each item is completed, and the next line is numbered in the order of 1 level numbering format.
4. To change the numbering level of the project, place the insertion point in the paragraph of the project, and then click the Increase Indentation button (or press Tab) or the Decrease Indentation button (or press Shift+Tab) in the Formatting toolbar.
Tip:
1. You can't use the "Increase Indent" button (or press the Tab key) to lower the level of the first top-level number that appears in the document, only the indentation effect can be produced.
2. If you want to use a multilevel list for paragraphs that have been entered into the document, you can select these paragraphs first, and then perform the above steps 1 and 2.
3. In the document, you can "restart numbering" and "continue numbering" the numbered paragraphs by right-clicking the paragraphs that use the multilevel symbol list and then selecting the corresponding command.
Question How does word enter "Format/Bullets and Numbers" before automatic numbering, and select "Custom", as shown below. Add the word attachment before the number in the numbering format, or you can add other words.
Question 6: How to make the number of words automatically? Wang_xing 1 1 (in-sTAtion conTAct ta): the number of 123 is on the d toolbar, and click its doggie (in-station contact ta) format -bullet and the number wang_xing 1 1 (in-station contact ta). Please put the view on the toolbar first-modify Wang _xing 1 1 (in-sTAtion contact ta) originated in IMS Cynat 2006-3-30 02: 42 pm: select the content to be numbered, find "format-bullets and numbering-numbering" and select the desired style. If you are not satisfied. Modify by customization; ) dbnkjy (station contact ta) Select the paragraphs to be numbered, click the format \ bullet and number them, and select multilevel symbols in the pop-up dialog box to set them. If you are not satisfied with the default format, you can also choose custom. Goxingyi (contact TA in the station) Thank you for your reply! Thank you very much Yhyh96 (in-station contact TA) for choosing the content to be numbered, and find "format-bullet and number-number" agno3 (in-station contact TA). I suggest you study the book. Do you know WORD?
Question: How does word2007 automatically generate multilevel numbers for office2007? Click the button in the Start paragraph. There is a number like 1. 1. 1. Click on the small triangle of the third button, and you can define it at the bottom.
Question: How to automatically number formulas in word? Urgent! ! ! After inserting the formula, put the formula in a separate paragraph, right-click the formula and select Format Object | Layout as the embedding type (Word default).
When the cursor is placed behind the formula, don't (pay attention to "don't") select the formula, and select "caption" in the "Insert | Reference" menu (in 2007, it was reference-insert caption). Since no item is selected, the item Location is grayed out, and a new label Formula 1- is created, and the selected numbered item contains the chapter number.
Click OK, and Word will insert the label text and the automatically generated serial number into the cursor position. If necessary, you can add parentheses after the serial number.
The number of the formula should be at the end of the right line. The specific method is: the tab stop refers to the position on the horizontal ruler, and specifies the indentation distance of the text or the starting position of a column of text, so that the user can align the text lines to the left, right or center; Or align text with decimal points or vertical characters. Users can automatically insert specific characters before tabs, such as periods or dashes. By default, when you press the Tab key once, Word will insert a tab in the document with an interval of 0.74 cm. The types of tab stops include: left alignment, center alignment, right alignment, decimal point alignment, vertical line alignment, etc. These tab stops are used in roughly the same way. Here, only the requirements of formula typesetting and the production of catalogue in the paper are taken as examples to illustrate the use method and effect of tab stop. For more detailed instructions, please refer to the help document of Word.
The formula in the paper is required to be placed in a separate paragraph, with the formula in the middle; Number chapter by chapter, and put the number in brackets at the end of the right line. First, enter formulas and numbers. The format of the formula is "embedded" and the numbers are enclosed in brackets. Then put the cursor in the paragraph where the formula is located, click the tab stop icon in the upper left corner of the page, switch to the central tab stop, and click the middle position of the horizontal ruler with the mouse, so that a central tab stop is placed where you click. If the position is not suitable, you can drag it with the mouse to adjust it.
Switch the tab stop icon in the upper left corner to the right-aligned tab stop, and place the right-aligned tab stop at the end of the line in the same way as the middle tab stop.
After setting the Tab stop, put the cursor in front of the formula and press the tab key, so that a tab is inserted in front of the formula. At this point, the formula is centered at the central tab stop, then move the cursor between the formula and the left bracket, and then press the Tab key to insert a tab, and the number will run to the end of the line.
It is very simple and convenient to use the tab stop method to deal with the typesetting of formulas, and there is no need to knock many spaces to move the formulas to the middle and push the numbers to the end of the lines. Another advantage is that if the length of a formula or number changes, Word will automatically adjust it so that the formula is always in the middle of the page and the number is always at the end of the line, and the line will not be broken because the formula or number becomes longer.
If you set the tab stop manually, there is no guarantee that the position of the central tab stop and the right tab stop will be the same every time. A simpler method is to save the setting of formula paragraphs as a style, and apply this style to all formula paragraphs, which is simple and convenient, and can keep the tab stops of all formula paragraphs consistent.
How to save the setting of a formula paragraph as a style: after setting the format of the formula (that is, the number has been inserted through the caption, and the formula is centered through the tab stop, and the number is at the end of the right line), select the formula and its number, and click Format | Style and Format, and the style and format bar will appear on the right side of word. Click New Style at the top of the column, and a new style box pops up. How to apply this style to a new formula paragraph: after the title is new formula number, select the formula and number, and select "My" in the "Style and Format" column on the right side of word. At this point, the tab stop setting has been applied to the new formula. Put the cursor in front of the formula and press the Tab key, and the formula will be aligned with the middle tab stop. Then move the cursor between the formula and the left parenthesis, press the tab key to insert a tab, and the number will run to the end of the line.
note:
(1) When inserting a caption to create a new label, Word will automatically add a space between the label text and the serial number, which looks uncomfortable. After inserting the caption, spaces can be deleted, so that when the serial number of the figure is quoted in the document, there will be no spaces in the bookmark.
(2) It is best to sign the book with the explanatory text of the figure (table, formula), and try to know it by name. > & gt
How to number tables automatically in word is actually very simple. Just tell the column 1-50 and click the number button on the toolbar. If the sample is incorrect, you can also use "Bullets and Numbers" in the format menu bar to modify it!
Question10: How to automatically number word 2010/.1.22.1.2? There is no need to set the number in the style, but it can be generated automatically through a multi-level list.
You can select the third opening paragraph of the first line by clicking the drop-down arrow.