According to your description, if the TV has built-in WIFI function, you need to connect to the wireless network. Please refer to the following steps:

1, the wireless router that our TV can recognize is set with WEP encryption, and the settings are as follows: open authentication, 64-bit WEP encryption, ASCII key, arbitrary key, and 5 digits password. You can also use WPA encryption, and the settings are as follows: TKIP is the password type, PSK/EAP is the password type, and the password needs to be set to 8 digits. It is recommended that the password be pure numbers. You can set any one and then connect.

2. After the router is set, enter the system settings of TV-Network-Wireless, turn on wifi, select your router name, and a dialog box will pop up, prompting you to fill in the password. Please use Konka remote control/keyboard mouse to enter. After entering, click Connect first, and then click Network Detection. If the TV prompts that the network has been restored/connected, it means that the TV has been connected successfully. If the network is unsuccessful, reset the router and try again.

If the TV is a system machine above Android 4.0, it is recommended that you use video software such as VST Full Aggregation, Youku xl Cracked Edition, Shenma Video, and TV House under the computer.

Our Android TV supports Android software from any source, but because there are many softwares, we can't test them one by one, and we can't guarantee that 100% can be used. I suggest you try to find customers online.

As you did not provide a model, please refer to the above. Thank you for your inquiry.

Konka enterprise knows that it will provide you with high-quality solutions and answer your questions attentively, hoping to be adopted by you.