simplified Chinese
Then open the dialog box where x7 must install some projects, and click Install, as shown in the figure:
Carry out installation
After installing the necessary items, click Next, as shown:
Click Next.
In the license agreement dialog box that appears, click I accept the agreement, and then click Next, as shown below:
Accept the license agreement
In the user information dialog box that opens, manually add the user name and company, and then click Next, as shown in the following figure:
Add user information
Then open the dialog box of destination folder and * * * shared folder, and we can change the installation path in this dialog box, as shown in the figure below:
Select a destination and a * * * shared folder.
First, let's change the installation path of the main program, click the change command to open the dialog box for changing the current target folder, then change the installation path, and then click OK, as shown in the following figure:
Change the installation path
We can see that the path has changed in the dialog boxes of the target folder and the * * * shared folder. Similarly, the installation path of * * * shared files is also selected in this way, so we won't make any changes here, and then click Next, as shown in the figure:
FOLDER
In the SIM and Unit type dialog box that appears, it is important to note that the difference between Hasp and NetHasp lies in whether you allow other users to enjoy your information through network connection. Hasp only allows your software to run locally, and does not allow other machines to connect to your machine through the network to enjoy your product software. Net supports user concurrency, which means that you set the * * * enjoyment attribute to allow a certain number of users to access your software information. We choose NETHASP and inch, and then click Next (users can choose according to their own needs), as shown in the figure:
choose
Then click the install command to install, as shown in figure:
Carry out installation
Installation, as shown in the figure:
fix
After the installation is completed, click Finish to exit the main program, as shown:
Installation completed
Step 2: crack the software
First, we open the cracked file, as shown in the figure:
Open the cracked file
Find Mastercam.exe in the cracked file and copy it, as shown in the figure:
copy
Paste it into the Mastercam X7 installation directory (e:\Program Files\mcamx7\ here) and overwrite the original file, as shown in the figure:
Replace file
After the replacement is completed, the USB driver will be installed, that is, the computer will be restarted. It should be noted here that when restarting the computer, you should press F8 to start it by disabling the driver signature enforcement.
After the computer starts, copy the folder USB-Emul_Win64 to drive C, as shown in the following figure:
Copy to drive c
Then open the USB-Emul_Win64 file and double-click the mcamX7_nethasp_SSQ.reg program, as shown in the figure:
Double-click program
Select Yes in the registry editor that appears, as shown:
Click Yes.
Select OK in the next registry editor that pops up, as shown in the following figure:
Select ok
Then double-click the batch file in the USB-Emul_Win64 folder and wait for the new system equipment to be found and installed (there is a prompt in the lower right corner of the computer). Note: If the computer doesn't respond after double-clicking install.bat and there is no prompt in the lower right corner of the computer, please add the driver manually according to the following methods:
First, we restart the computer and press F8 to enter (disable driver digital signature enforcement) mode. Click My Computer Properties to open the Properties dialog box. Select Device Manager on the right side of the dialog box to open the device manager dialog box, and select Operation-Add Abandoned Hardware command in the device manager, as shown in the following figure:
Add obsolete hardware
Click Next in the Add Hardware Wizard, as shown in the following figure:
next step
Select manual installation, and then click Next, as shown:
Select manual installation.
Select Show All Devices in the Installation Hardware Type dialog box, and click Next, as shown in the following figure:
next step
Select Install from Disk in the Add Hardware dialog box, as shown in the following figure:
Install from disk
Select the patrol command from disk installation, as shown in the following figure:
visit
Browse to mcmvusb.inf-OK under the "USB-Emul_Win64" directory, as shown in the figure:
tourist track
Install the hardware, as shown in the figure:
Install hardware
Close the driver and complete the installation, as shown in the following figure:
Close the driver
After the installation, we can see that the devices of the virtual Usb bus enumerator appear under the device manager-system devices, as shown in the following figure:
Install the virtual Usb bus enumerator device.
Then open e: program files \ mcamx7 \ nhaps x in the installation directory, and the following dialog box will appear:
dialog box
make a choice
After installing here, we can start MasterCAM X7 software, but press F8 >; every time we start the computer. Disable driver signature enforcement mode starts. This is a little troublesome. Let's talk about how to cancel F8-disable driver signature enforcement, but still start normally.
Step 3: Cancel F8- Disable driver signature enforcement, MasterCAM X7 can still start normally.
First, we open the cracked file and find the driver signature forced overwrite software, as shown in the following figure:
Find dseo file
Double-click to open the file, and then click Next, as shown:
Click Next.
In the next dialog box, select Yes, as shown:
Click Yes.
Click the first "Enable Test Mode" option to enable test mode, and then click Next, as shown:
Select Enable Test Mode.
Select Yes in the dialog box, as shown:
The choice is yes.
Click the third option of "sign system file", and then click Next, as shown:
Select item 3.
Enter their address manually, so as to obtain the test signature certification through DSEO. Manual input: or copy and paste,
The address is this c: \ windows \ system32 \ drivers \ mcmvusb.sys.
Enter the URL manually.
Here is a brief introduction to the method of finding driver files:
First click Computer-Properties-Device Manager-System Device-Virtual Usb Bus Enumerator, then click Properties to open the Virtual USB Bus Enumerator Properties dialog box, and then select the driver details in the information dialog box to find the driver file path, as shown in the following figure:
flow chart
Then select OK in the donel dialog box, as shown in the figure:
Select ok
Then exit the program, as shown in figure:
Exit program
After this cracking is completed, the computer must be restarted normally, so that the software can avoid the normal use of F8 key, as shown in the figure below:
Normal use of software
The software can be used. If you are careful, you will find a watermark on the desktop.
watermark
The following is the method to remove the watermark.
Step 4: Remove the watermark from the computer.
First, we select Start on the desktop, and then enter cmd in the search command, as shown in the figure.
Cmd command
Then press enter to open the driver dialog box, as shown in figure:
driver
Then enter bcdedit -testsigning off in it, as shown in figure:
invest
Then enter and close after the following command appears.
close
Then restart the computer, and we can see that the watermark is gone.
(1) Information Security Course
Take the unified examination of computer specialty (data structure, operating system, computer network, co