Current location - Quotes Website - Signature design - Safety production management system of the construction unit?
Safety production management system of the construction unit?
catalogue

general rule

Institutions and responsibilities

Education and training

Equipment, engineering construction, workplace

LOC

Flammable and explosive articles

lift

Prevention and treatment of personal protective equipment and occupational hazards

Inspection and rectification

Reward and punishment

I. General principles

Article 1 In order to strengthen the labor protection of the company's production work, improve the working conditions, protect the safety and health of workers in the production process, and promote the development of the company's cause, these Provisions are formulated in accordance with the labor protection laws, regulations and other relevant provisions, combined with the actual situation of the company.

Article 2 The company's safety production work must implement the policy of "safety first, prevention first" and the general manager (legal representative) responsibility system. Leaders at all levels should adhere to the principle of "production must be safe", and production should obey the needs of safety to achieve safe and civilized production.

Article 3. Organizations and individuals who have made outstanding contributions to safety production should be rewarded, and those responsible for accidents caused by violations of safety production systems and operating procedures should be severely dealt with. Those who violate the criminal law shall be handed over to judicial organs for punishment.

Two. Institutions and responsibilities

Article 4 The safety committee of the company (hereinafter referred to as the safety committee) is the organization and leading body of the company's safety production, which is composed of company leaders and heads of relevant departments. Its main responsibilities are: fully responsible for the company's safety production management, researching and formulating technical measures and labor protection plans for safety production, implementing safety production inspection and supervision, and investigating and handling accidents. The daily affairs of the Safety Committee shall be handled by the Office of the Safety Production Committee (hereinafter referred to as the Office of the Safety Committee).

Article 5 The production units under the company must set up a leading group for safety production, which is responsible for educating the employees of the company on safety production and formulating the detailed rules and operating procedures for safety production. Implement the supervision and inspection of production safety, and implement the safety instructions of the safety committee to ensure production safety. The leader of the safety production team shall be the leader of each unit, and shall be equipped with full-time (part-time) safety production management personnel as required. Each machine building (room) and production team should be equipped with a full-time security officer.

Article 6 Division of work safety main responsible persons: the chief executive of the unit is the first responsible person of the unit for work safety, and the leaders in charge of production and full-time (part-time) safety production administrators are the main responsible persons of the unit for work safety.

Seventh engineering and technical personnel at all levels must ensure the accuracy of the application of safety technology and occupational health technology when examining and approving technical plans, schemes, drawings and other technical documents.

Eighth functional departments must do a good job in production safety within their respective business scope.

Article 9 The responsibilities of the full-time management cadres of the company's production safety are as follows:

1. Assist leaders to implement labor protection laws and regulations and comprehensively manage daily safety work.

2. Summarize and review the safety production measures plan, and urge relevant departments to effectively implement it on schedule.

3. Formulate and revise safety production management systems, and supervise and inspect the implementation of these systems.

4. Organize safety inspection. Often go deep into the field to guide the labor protection work in production. In case of particularly urgent unsafe conditions, have the right to order to stop production, and immediately report to the leadership for research and handling.

5. Summarize and popularize the advanced experience of safety production, and assist relevant departments to do a good job in safety production publicity and education and professional training.

6. Participate in the review of design documents, project acceptance and commissioning of new construction, reconstruction, expansion and overhaul projects.

7. Participate in the investigation and handling of casualty accidents, be responsible for the statistics, analysis and reporting of casualty accidents, assist relevant departments to put forward measures to prevent accidents, and urge them to be realized on time.

8. According to the relevant regulations, formulate the distribution standards of labor protection articles and health food of this unit, and supervise the implementation.

9. Organize relevant departments to study and formulate protective measures against occupational hazards and supervise their implementation.

10. Give instructions from superiors and grass-roots information, and give feedback.

Article 10 The full-time (part-time) safety production administrator of each production unit shall assist the leaders of the unit to implement the labor protection laws and regulations and the safety production management system, and handle the daily affairs and safety production inspection and supervision of the unit.

Article 11 The safety personnel of each machine building (room) and production team shall regularly check and urge the members of each machine building (room) and team to abide by the safety production system and operation procedures. Do a good job in safety inspection and maintenance of equipment and tools. Timely report the safety production situation of the local building (room) and team to the superior. Do a good job in the registration and custody of original materials.

Twelfth workers in production and work should seriously study and implement the safety technology operating rules, abide by the rules and regulations. Take good care of production equipment and safety protection devices, facilities and labor protection articles. If unsafe conditions are found, report to the leader in time and eliminate them quickly.

Three. Education and training

Thirteenth new employees, temporary workers, migrant workers, interns, must first carry out three-level safety education (that is, the production unit, machine building (room) or team, production post), before entering the operating post. For workers who change jobs, they must receive safety education again before they can take up their posts.

Article 14 Personnel engaged in special types of work, such as boilers, pressure vessels, elevators, electrical appliances, lifting, welding, vehicle driving, pole operation, inflammable and explosive, must receive professional safety technical training, and can operate independently only after strict examination by relevant departments and obtaining qualified operation certificates (certificates). Regular safety education must be carried out for on-the-job personnel of special types of work.

Four, equipment, engineering construction, workplace

Fifteenth all kinds of equipment, instruments shall not be overloaded, sick operation, and should be used correctly, regular maintenance, regular maintenance. Old equipment that does not meet the safety requirements shall be updated and reformed in a planned way.

Sixteenth electrical equipment and wiring should comply with the relevant national safety regulations. Electrical equipment should have fusible insurance and leakage protection, good insulation, and reliable grounding or zero protection measures; Sealed electrical equipment should be used in workplaces that produce a lot of steam, corrosive gas or dust; Flammable and explosive workplaces should be equipped with explosion-proof electrical equipment; Safe voltage should be used in wet places and mobile electrical equipment. Electrical equipment must meet the safety technical requirements of the corresponding protection level.

Article 17 When importing foreign equipment, safety accessories that cannot be matched at home must be imported at the same time, and the imported safety accessories shall meet the safety requirements of China.

Eighteenth where the new construction, renovation, expansion, relocation of production sites and technical transformation projects, must arrange the construction of labor protection facilities, and at the same time with the main project design, construction, and put into use at the same time (hereinafter referred to as "three simultaneities").

Article 19 When organizing the project design and completion acceptance, the competent department of engineering construction shall put forward the design scheme, completion and quality evaluation report of labor protection facilities, which shall be accepted by the labor, health, safety and other departments at the same level and the trade unions, and then the construction and production can be started. Forced construction and production without the consent of the above departments shall be investigated for responsibility.

Twentieth workplace layout should be reasonable, keep clean and tidy. Toxic and harmful operations must have protective facilities.

Twenty-first production buildings and buildings must be strong and safe; The channel is flat and smooth, and there should be enough light; Dangerous places, such as pits, ditches, pools, platforms, elevators, etc. There must be safety facilities and obvious safety signs for production.

Twenty-second workplaces with high temperature, low temperature, humidity, lightning, static electricity and other dangers must take corresponding effective protective measures.

Article 23 When hiring personnel from other units to the company's site for construction, the competent unit shall strengthen management and implement the working ticket system when necessary. Anyone who violates the operating rules and causes losses to the company's property must claim compensation and deal with it seriously.

Twenty-fourth, the employed construction personnel need to enter the computer room, computer room construction work, must go to the security department for the "access permit"; If it is necessary to work with naked flame, you must also fill in the company's temporary hot work application form and go through relevant procedures.