Is there a regulation on the direction of cigarette butts in the no-smoking sign?
Fire fighting system 1. Earnestly study and implement the Fire Protection Decree No.61issued by the Ministry of Public Security, intensify publicity and training, educate employees on fire protection common sense, make employees in the whole store familiar with fire protection common sense, and make everyone responsible for fire protection work in enterprises. 2. Clear the task, implement the responsibility, sign the letter of responsibility for safety and fire prevention step by step, and truly implement the fire control work according to the working principle of who is in charge and who is responsible. 3. Intensify inspection and rectification. In addition to organizing special inspections every week, there should also be a three-level inspection system of the security department to check the safety and fire prevention situation every day. Find problems, report them in time, and deal with them in time. 4. Organize enterprise fire fighting and evacuation drills at least twice a year. 5. Do a good job in fire prevention during major festivals and make specific security plans. 6. Strengthen the management of fire source and power supply, implement the inspection system of natural gas and liquefied gas and the inspection system of electrical line equipment, and make clear the fire hazards in time. 7. Establish enterprise fire protection files, and set up obligatory fire brigade, so as to give priority to prevention and combine prevention with elimination. Strengthen the smoking management system and prohibit smoking in shopping malls. 8. Adhere to the special management and inspection of safety exits and evacuation routes, and punish the department responsible person who fails to rectify the hidden dangers of fire or fire lines in time. 9. Ensure that the fire control facilities and equipment are in place, complete and easy to use, in line with the requirements of laws and regulations, and implement the maintenance responsible person. Handover system of fire monitoring center 1. Successors must arrive at their posts fifteen minutes in advance to prepare for the handover. Second, you must dress according to the regulations before taking up your post and check the mental outlook of gfd. Third, check whether the post equipment is running well and the matters needing attention in handover inspection and machine execution. Four, the personnel on duty must fill in the equipment operation, inspection and other content. And require clear handwriting and complete records. Five, fire emergency tools, all kinds of related information in accordance with the provisions, neatly placed. Six, do a good job of cleaning the central control room, to ensure the cleanliness of machines, floors and walls. Seven, the successor has not arrived, on-the-job personnel shall not leave, should promptly report to the relevant leaders for instructions. Eight, the content and time of succession must be signed in the handover book, to show confirmation and responsibility. Nine, in case of emergency and other special circumstances, the successor shall assist the successor to handle the incident, and the succession shall be carried out after the incident is handled and approved by the superior leader. Ten, the successor is drunk, emotional instability, unconsciousness, shall not be handed over, should be reported for instructions to deal with eleven, hand-over must be carried out in accordance with this system, if not in accordance with the provisions, the successor can put forward opinions and ask the successor to fill in immediately, otherwise it can not take over, and report to the relevant leaders. Twelve, the fire control room is equipped with two people, not a single hand over the machine, not a reliable telephone handover, should be reflected in words. Safety inspection system of fire monitoring center 1, and every two hours, fire inspection should include: a whether there is any violation of the regulations on the use of fire and electricity: the shopping mall is smoke-free, smoking is prohibited, and fire is prohibited at will; Catering fire protection: There shall be no inflammable and explosive dangerous goods in the range of microwave oven and cooker 1m, the clear distance between cooker and gas cylinder shall not be less than 0.5m, and the length of hose connecting cooker and gas cylinder shall not exceed 2m. Hoses should be inspected frequently and replaced regularly. Ignition matches should be used when igniting, and the gas valve should be closed in time after ignition. Within the range of 1 m, the smoke hood and flue entrance of the operation room should be cleaned daily. Clean the oil fume exhaust pipeline at least once every 60 days 1 time, and record the cleaning situation; Fire for construction: issue a certificate of hot work, specifying the professional qualification of hot work personnel, the equipment of fire watchers, fire extinguishers and fire boards and other preventive measures, whether there are dangerous chemicals on the site and whether there are oil workers crossing operations. During hot work, there shall be no flammable or combustible substances within 2 or 5 meters around the welder, and no one shall leave the site for cleaning within 30 minutes after hot work, and no kindling shall be left; When using electricity, it is forbidden to pull the wires and power supply indiscriminately. The laying of electrical wiring shall be approved by the design, engineering and safety departments. Professional licensees should use standard wires and equipment that meet national requirements according to the power and quantity of electrical equipment. The distribution wires in shopping malls must be wrapped with rubber, and it is forbidden to use simple and dangerous materials such as stranded wires. B. Whether the safety exits and evacuation passages are clear, whether the safety evacuation signs and emergency lighting are in good condition: the safety exits shall not be closed or blocked, and no threshold shall be set at the safety exits. Evacuation doors should be opened in the direction of evacuation, and rolling doors, revolving doors, hanging doors and sliding doors are not allowed. No steps shall be set inside or outside the door1.4m.. Indicating signs should be set on the top of the exit and the wall below the ground 1 m at the evacuation passage and its corner; The spacing of the indicating signs set on the evacuation passage shall not be greater than10m. Emergency lighting should be provided for the safety exits, evacuation passages and key parts of the business area. The continuous lighting time of emergency lighting shall not be less than 20 minutes, and the minimum illumination on the ground shall not be less than 0.5 lux. The main evacuation passage should lead directly to the safety exit, and its width should not be less than 2.4m.: The width of the auxiliary evacuation passage shall not be less than1.5m. No stalls or stacked items shall be set in the evacuation passage. C whether the fire-fighting facilities, equipment and fire safety signs are in place and complete: no shop or individual may damage, misappropriate, dismantle or stop using fire-fighting facilities and equipment, bury, occupy or block fire hydrants, occupy fire-fighting space or block fire truck passages. Doors and windows in crowded places shall not be equipped with obstacles that affect escape and fire fighting and rescue. Fire hoses, hoses and gun heads in fire hydrants must be used well. The annual inspection of the fire extinguisher is effective, the lead seal is intact and the pressure reaches the standard. Fire fighting equipment and facilities shall not be used for matters unrelated to fire fighting and rescue work. D. Whether the normally closed fire door is closed or not, and whether the goods are stacked under the fire shutter will affect the use: A-class (90-minute) fire door closers are used in shopping malls and their sequence. E. On-the-job situation of personnel in key parts of fire safety: implementation and management of responsibilities of personnel in power distribution room, machine room, warehouse and kitchen. The goods in the warehouse should be stacked in piles, and the area of each pile should not be greater than 100 square meter. And ensure the "five distances": the distance between piles shall not be less than 1m, the distance between piles and walls shall not be less than 0.5m, the distance between piles and beams shall not be less than 0.3m, and the distance between piles shall not be less than 0.5m. The width of the main passage in the warehouse shall not be less than 2m. The stacking of inventory items shall not occupy or affect the use of fire control facilities and equipment. Iodine tungsten lamp and incandescent lamps over 60 watts are not allowed to be used in the warehouse. When using low-temperature lighting lamps such as fluorescent lamps, ballasts should take fire prevention measures such as heat insulation and heat dissipation; Ballasts should not be installed on the ceiling. Mobile lighting is not allowed in the warehouse. The horizontal distance between the vertical lower part of the lighting fixture and the stored articles shall not be less than 0.5m..2. Inspectors shall promptly correct the violations and properly handle the fire hazards. If they cannot be disposed of on the spot, they shall report immediately. When you find the first fire, you should immediately call the police and put it out in time. You can call the central control (* * *) fire alarm number (1 19) and press the nearest fire alarm button. 3. The fire inspection shall fill in the inspection records, and the inspectors and their supervisors shall sign the inspection records and file them for future reference. Inspector is the security force of the security department. In case of suspicious persons and objects, we should follow up the handover, and timely find out the illegal behaviors and dangerous actions of shops and individuals (smoking, taking photos, roller skating, taking pets, staying in the passage for a long time, distributing advertisements, conducting customer service surveys, unauthorized use of news media, customer disputes, customer complaints, unauthorized construction, dangerous handling, untidy clothes, fighting, etc. ). Whether there are sundries in the passage and whether the lever push of the door lock is in good condition. Security guards should pay attention to self-protection when on duty. 5. Inspectors are not allowed to chat or do private affairs during working hours, and are not allowed to enter the independent management area without authorization. If the job requires, they can only enter with the consent of two or more people and cooperate with the person in charge. Working system of fire monitoring center 1. Strictly abide by national laws and regulations and the company's rules and regulations. Understand and master the performance indicators and operation methods of fire alarm control equipment and facilities, be familiar with relevant professional theoretical knowledge and safety operation procedures, and hold relevant certificates; Second, stick to your post and always be on high alert. Monitor fire alarm control and monitoring equipment and facilities, operate in strict accordance with procedures, seriously deal with on-duty events and record them truthfully; 3. Regularly check the equipment and communication equipment in the fire control room, and regularly test and maintain the functions of each system to ensure that the fire control facilities are in good working condition; Four, keep the room clean, facilities and equipment without stains, dust, indoor items neatly, walls and floors clean; Properly keep and use the relevant equipment and facilities in the control room and various public goods, prevent loss and damage, and register the recipients and borrowers; Five, when the fire broke out, the correct and timely operation and use of fire alarm control equipment and facilities, and timely notify the relevant departments and responsible persons according to the prescribed alarm procedures; After the fire is confirmed, start and close the relevant fire-fighting equipment and facilities correctly as required, and cooperate with the organization to extinguish the fire; Six, found that the equipment and facilities failure, timely notify the leaders on duty and engineering and technical personnel for repair and maintenance, and shall not dismantle, misappropriate or stop using the equipment and facilities. Actively cooperate with relevant personnel to repair and maintain equipment and facilities and register them truthfully; Seven, give full play to the advantages of the monitoring system, pay close attention to all kinds of situations in the mall, pay attention to find suspicious people or suspicious items. Report the abnormal situation to the leader on duty in time, and take decisive measures according to the operating rules, so as not to be careless or delay the fighter plane; Eight, do a good job of confidentiality in the central control room. Irrelevant personnel are forbidden to enter the fire control room, and those who need to enter the monitoring room for work need to be approved by the security manager before entering, and the personnel on duty should make records; Nine, fill in the relevant facilities and equipment operation records, situation and processing results during the duty. If it is not handled on duty, inform the successor to continue to follow up and hand over the goods; Ten, complete other tasks assigned by the leadership. On-duty personnel system of fire monitoring center. The personnel on duty must stick to their posts and must not leave their posts without permission. Be on duty and patrol on time as required, and earnestly perform their duties. Except the floor patrol and the police, the personnel on duty shall not do anything unrelated to their jobs; Second, the personnel on duty shall not be absent without reason and shift shifts without permission. When it is urgent to change shifts due to special circumstances, the personnel on duty must apply to the fire foreman three days in advance and fill in the "Shift Change Application Form", which can be adjusted only after being approved by the department leader. When a major accident occurs during shift change, the personnel on duty shall bear the main responsibility; Third, actively cooperate with the security guards to do their daily work. In case of emergency, if the personnel on duty cannot handle or exceed their functions and powers, they should report to the company leaders in time according to the procedures, and the personnel on duty shall not make decisions without authorization; Four, establish a perfect work record system, the engineer on duty should record my name, date, shift, fire monitoring system operation, duty and follow-up matters in detail, and do a good job of handover; Five, irrelevant personnel shall not enter the central control room without authorization, if approved by the company leaders, central control personnel should strictly implement the visitor registration system; Six, the attendant should take the initiative to undertake the cleaning work of the central control room, put tools and supplies in order, and clean the floor, indoor equipment and facilities, equipment, tables and chairs, doors and windows glass every day, and indoor equipment can not have dust and stains; Seven, on-the-job work shall not make personal phone calls, play games, read books, newspapers, magazines, smoking, drinking, sleeping. It is forbidden to eat in the central control room; Eight, pay attention to gfd, maintain a good mental state, dress and carry duty supplies according to regulations. Nine, fill in the relevant facilities and equipment operation records, situation and processing results during the duty. If it is not handled on duty, inform the successor to continue to follow up and hand over the goods. This can be modified according to your own situation.