Have you ever written a safety responsibility book? Safety in production is an important guarantee for the development of enterprises and an important concept in production and operation. The following is how to write the responsibility book for safety production, hoping to provide you with reference and reference.

How to Write the Responsibility Letter for Safety in Production (Part I) In order to successfully complete the company's annual work target, conscientiously implement the national labor protection law, the safety production law and the company's rules and regulations on safety in production, advocate safe and civilized production, ensure the safety of life and property of people in the station during production, and implement the responsibility system for safety in production to individuals, Hong Zhong Gas Station has specially signed this responsibility letter for safety in production with employees.

I. Signing materials

1. Employees promise to obey the company's safety management and strictly abide by the company's safety rules and regulations and operating procedures during their work in the company.

2. Employees are not allowed to bring inflammable, explosive or other dangerous goods into the company premises. When unsafe hidden dangers are found in the company, they must be controlled in time and reported to the person in charge of the department (including the production unit) quickly.

3. Employees are not allowed to hold controlled knives and instruments, fight, steal other people's property and company articles, destroy the company and other people's property, and have other behaviors that threaten the personal and financial safety of the company and others.

4. Employees should carefully check the lighting, doors and windows, office equipment, vehicles and other equipment in the work area after work to ensure that the electrical equipment is turned off and the office doors and windows are closed and locked. If employees violate the above requirements or other personal reasons, resulting in fire, theft or equipment damage and other safety accidents or losses, the company will hold employees accountable.

5. The company will investigate the employees' corresponding responsibilities for unsafe hidden dangers, accidents or personal injuries caused by improper operation of equipment and appliances or failure to operate according to the prescribed procedures.

6. Employees must pay attention to personal safety during vacation or not going to work (including going out during working hours for personal reasons), and must abide by national laws and regulations, traffic regulations, codes of conduct in public places or other standards that the whole society should abide by. If you fail to comply with the traffic laws and regulations of the company, the employees will bear all the responsibilities themselves.

7. Employees shall strictly abide by the company's dormitory management regulations, and shall not engage in pornography, gambling, drugs and other illegal acts or other behaviors that violate social morality in the dormitory or other places provided by the company, and shall not lead non-company employees into the dormitory or accommodation without authorization. Once found, the company will cancel the employee's accommodation qualification and impose corresponding penalties according to company regulations. If illegal and criminal acts are involved, the company has the right to transfer employees to public security organs for legal treatment.

8. Employees are not allowed to use high-power electrical appliances in company premises (dormitories, offices, production and business premises) without authorization, or engage in hot work without authorization, or engage in other unsafe behaviors such as electric shock, fire and other personal casualty accidents. In addition to tracing the responsibility of the relevant responsible person, employees must bear all responsibilities.

9. Employees must strictly abide by the canteen management system. It is forbidden to enter the canteen operation room without permission, and it is forbidden to use canteen materials, facilities and equipment and liquefied gas bottles without authorization.

10, employees should take good care of the company's property and their own property, and should not store valuables or cash in the office or dormitory. In case of property losses caused by violation of the above provisions, the employees shall bear their own responsibilities.

1 1. Be familiar with the specific information of "Four Harms" and actively participate in the emergency plan drills organized by the company and departments. Employees of production units shall also comply with the following requirements

12. Take an active part in the educational activities of the safety team, learn the safety technology operating rules of this position, and operate strictly according to the rules in the work.

13, strictly abide by various safety production systems, observe labor discipline, and put an end to unsafe and impolite behaviors such as violating labor discipline and illegal operation.

14, to understand the company's safety education and safety technical disclosure, you must sign the safety education registration form and safety technical disclosure book. In the process of production, we must conscientiously implement safety technical measures to ensure the safe production of gas stations.

15. Actively participate in the activities of creating safety and politeness demonstration projects to ensure that you will not hurt yourself, others or be hurt by others.

16, strengthen the safety follow-up inspection before, during and after work, handle hidden dangers at any time when found, and make safety disclosure to team members before and after work.

17, must understand the supervision and inspection and correct leadership of the company's management personnel, unconditionally implement the hidden dangers rectification notice issued by the company, complete the rectification on schedule and report it to the company for review.

18. Safety protection articles, production facilities, measuring instruments, etc. in the production process. Should be used correctly, and strengthen the maintenance in the process of use.

19, and has the right to refuse to carry out the company's illegal command and wrong instruction.

20. In case of safety accidents or major safety hazards, employees must immediately report to the company and cooperate with the investigation and handling of the company and relevant departments.

Second, the handling of violations

You must arrive at your post in time during working hours, wear uniform clothes, do not leave your post for personal reasons, wear safety helmet, fasten your seat belt for aerial work, and remind the construction unit to set up safety protection facilities, signs and warning signs around the construction site in time before starting work. Supervision work logs and materials should be timely and complete, and production accidents or safety hazards should be reported in time. If any violation of the company's system is found, corresponding punishment will be imposed according to the company's relevant system.

This responsibility is valid for one year from the date of signing.

Employees:

Date:

How to Write the Responsibility Letter for Safety in Production (II) In order to thoroughly implement the safety production policy of "safety first, prevention first and comprehensive treatment", fully understand the responsibility system for safety in production, do a good job in safety in production in _ _ _ _ _, implement the main responsibility for safety in production of the company, put an end to all kinds of accidents, and ensure the safety and health of the company's property and employees, according to the principle of "whoever is in charge is responsible", the managers of all departments of the company and the company are responsible for safety in production.

A, the company's production safety objectives

1, and there was no death accident above moderate level.

2, industrial accidents (direct economic loss of more than 3000 yuan) is zero.

3. The fire accident is zero.

4, no food poisoning accidents, traffic accidents and criminal cases.

Second, the company's production safety responsibilities

1. The person in charge of production safety of the company is the first person in charge of production safety. Follow the general principles of "whoever is in charge is responsible" and "production must be safe" and be fully responsible for the safety production of this enterprise.

2. Abide by and implement the Safety Production Law, Fire Protection Law, Labor Law and other laws and regulations, publicize and thoroughly implement the relevant safety production rules and regulations of the state, development zones and companies, conscientiously implement and deploy all work, promote safety management, and study and popularize modern safety management methods and technologies.

3. Check and urge the management cadres and workers at all levels of the enterprise to consciously perform their safety duties in their work, strictly implement the rules and regulations of the enterprise, strengthen the management of production safety, and do not violate regulations.

4, according to the rules and regulations of production safety, organize the safety inspection of the department on a regular basis, to find out the security risks, to timely implement the rectification, take corresponding measures in time, and report to the production safety protection committee.

5. According to the rules and regulations of production safety, organize the incoming safety education (three-level education and training assessment for new employees) for newly recruited employees and related personnel (internship, training and foreign construction workers), as well as the safety training and safety publicity work for employees before taking up their posts and changing jobs, so as to be trained, recorded and effective.

6, responsible for the canteen safety and health and fire prevention work.

7, analysis of the department of production safety work, to do a good job of accident prevention and accident investigation and analysis.

8, formulate the department's production safety plan, improve the safety operation procedures and inspection system.

9, organize the implementation of the department of production safety accident emergency treatment and rescue plan and regular exercise.

10. Organize and implement the maintenance of the production equipment of this department, ensure the normal operation of the equipment, prevent the fire-fighting facilities and safety signs from being damaged, and ensure the smooth passage and safe exit.

1 1. Strengthen the management, registration and archiving of special equipment and special operators in this department, organize regular job skills training, register hazards and take preventive measures.

12, organize regular fire inspection according to safety production rules and regulations, and do a good job in public security.

13. Truthfully report production safety accidents to the production safety committee or the higher government. Understand the inspection of the superior administrative department in charge of production safety, understand the supervision and guidance of the safety Committee on production safety, do a good job in production safety and prevent accidents.

Department Manager: (Seal)

Person in charge of production safety of the company: (seal)

Date of signing: 20__ _ year 65438+February 1.

How to write the Work Safety Responsibility Letter (Part III) to Party A: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Party B: _ _ _ _ _ _ _

In order to implement the policy of "safety first, prevention first, comprehensive treatment", ensure the life safety and health of construction workers, protect the property of state-owned enterprises from losses, strengthen the work of safety in production at the construction site and prevent the occurrence of various safety accidents, Party A and Party B have formulated the following safety responsibilities through consultation according to relevant national laws and administrative regulations:

1. Party B shall establish a safety management system corresponding to Party A three days before admission, and the project manager of Party B shall organize the implementation of the responsibility system for safety production of Beijing construction enterprises. According to the construction scale and the number of employees, a safety management organization is established, with full-time, part-time and group safety officers to organize and supervise safety production.

2. Party B shall strictly implement the Construction Law of People's Republic of China (PRC) and the Regulations on Safety in Production of Construction Projects, implement the laws, regulations and provisions of the state and industry on safety in production, labor protection and fire control, and abide by various management systems of the enterprise. During the construction process, Party B shall strictly abide by the Beijing Construction Safety Operation Regulations and incorporate safety production into the whole construction process.

3. Party B is fully responsible for the safety protection, temporary electricity safety management, mechanical safety management and mechanical safety management of the construction site.

4. Before Party B starts the construction, Party B must give safety education to the construction personnel. Party B's construction personnel must wear badges when entering the site, special operators must also wear badges, and special operators must also carry special operation certificates. Party A's personnel have the right to check at any time.

5. Party B shall set up obvious signs in the construction area. For long-term centralized construction,

6. The safety protection equipment of Party B's construction team must be in place and the safety measures are effective, otherwise the operation shall not be started.

7. If Party B needs water and electricity, etc. During the construction period, Party B must fill in the application form. With the consent of Party A, the professionals will designate the water and electricity connection points, and the electrical lines and pipelines will be connected according to the specifications. Only after installing qualified measuring instruments can they be used. The expenses required shall be borne by Party B. When Party B uses temporary electricity on the construction site, both parties must sign the Management Agreement on Temporary Electricity Use on the Construction Site.

8. If hot work is needed in the construction process, it must be approved by Party B's safety management personnel and confirmed that the conditions for hot work are met. Only after safety measures are implemented can it be carried out. Party A's personnel have the right to check at any time.

9. Party B shall report the construction site application form and the number of workers to Party A in advance when carrying out construction at the construction site. When Party B's materials appear, it shall report to ministry of materials and equipment in advance and issue a receipt. When Party B's construction vehicles enter the site, the speed shall not be higher than 5km/h, and they must be inspected by the personnel on duty at the gate.

10. During the construction process, Party A has the right to check and stop the illegal operation, punish the behavior violating the safety regulations of the station or order Party B's construction team to stop work for rectification at any time.

1 1. The garbage generated by Party B during the construction shall be cleaned up as much as possible. After the completion of the project, Party B shall thoroughly clean up the construction site, so as to clear the site after the completion of the work. The cleaned garbage shall not be piled up in the site managed by Party A at will, otherwise a fine may be imposed according to the actual situation, and Party B shall be responsible for pollution, traffic and other accidents.

12. If Party B's safety production, civilized construction and environmental protection (including earthwork and muck transportation) are not up to standard due to the construction of this site, the developer, supervisor and government law enforcement departments will punish all losses of Party B, and Party A has the right to double the punishment on the original basis.

13. Party A has the right to punish Party B's unit that violates this agreement according to the Management Manual of Project Subcontracting, Regulations on Safe Production of Construction Projects, relevant documents of Beijing Municipality and Regulations on Engineering Punishment (attached).

14. This agreement will run through the whole construction process, and the information not included shall be implemented according to the relevant national and Beijing standards, and the latest Beijing laws and regulations shall be implemented according to the new laws and regulations. Supplementary agreement.

Party A (signature and seal):

Party B (signature and seal):

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

How to write a good responsibility book for production safety (Chapter IV) I. Responsibility

1. Responsible for the company's investment in production safety;

2. The company is responsible for the planning and planning of safety production investment when preparing long-term development plans and annual plans;

3. Ensure the implementation of funds such as safety technical measures, labor protection articles, physical examination of workers with occupational hazards, post subsidies, heatstroke prevention and cooling, and safety incentive fees, so as to achieve earmarking and regular accounting.

Second, the goal.

1. The incidence of serious traffic accidents and fires with serious injuries and deaths is 0;

2. Minor injury accidents shall be controlled within 2 cases per year (including 2 cases);

3. The accident investigation rate is 98%, and the general accident handling rate is 98%;

4. Zero production safety accidents;

5. Ensure that the annual safety investment is fully guaranteed.

Third, the reward and punishment assessment methods

According to the Management System for Formulation, Review, Revision and Assessment of Safety Production Responsibility System, the implementation of the responsibility system and the completion of safety production objectives are assessed on February 30th every year, and the assessment adopts a scoring system. The assessment results shall be approved by the first person in charge of production safety.

Four. explain

The main person in charge and the chief accountant sign a letter of responsibility for production safety, and the chief accountant completes the responsibility objectives one by one, and the general manager conducts an assessment at the end of the year.

Signature of Chief Accountant:

Signature of person in charge:

How to write a good responsibility book for production safety (Chapter V) I. Responsibility

(1) General production safety responsibilities

1. Take good care of all kinds of documents, materials, files and bills, and put an end to confidentiality, leakage and loss accidents;

2. The time and place for destroying documents and materials shall be specified, and special personnel shall be appointed to handle them;

3. All employees should be familiar with "three knowledge, three skills and three abilities" and fire emergency handling procedures; (3) Knowledge: knowledge of post fire hazards, knowledge of fire prevention responsibilities of departments and knowledge of fire emergency plans; The third meeting: will use and maintain fire extinguishers, will report fire, will evacuate and save people; Three abilities: can check and find problems, can publicize fire control knowledge, and can put out primary small fires)

4. Master the relevant emergency plans for production safety, and be responsible for protecting the important files of this department from losses when problems occur. When a major safety accident occurs, you should command calmly, organize rescue according to the accident handling procedures, and report to the safety management department and the person in charge of safety in time;

5. Do a good job in "five precautions" (fire prevention, theft prevention, damage prevention, explosion prevention, safety disaster prevention and accident prevention);

6. It is forbidden to pull wires in the office, use electric stoves and heaters, use naked flames, and store inflammable and explosive dangerous goods.

7. Have the responsibility to pay attention to the use of facilities and equipment such as cold and hot gas supply, telephone communication, office desks and chairs, and report the faults to relevant departments for maintenance;

8. Improve indoor hygiene management measures, regularly clean and dust, and adhere to a good, clean and fresh indoor working environment.

9. Before coming off work every day, the personnel of this department must turn off the power supply according to the prescribed operating procedures, conduct safety patrol inspection, and ensure that there are no hidden dangers before locking the door and leaving.

(2) Job site personnel responsibilities

1. Operators should strictly implement safety production rules and regulations and safety technology operating procedures during labor, and it is forbidden to operate illegally;

2. Operators should understand the situation of safety production education and training, understand the dangerous factors existing in this position and their possible serious consequences, master the safety knowledge suitable for this position, master the ability of accident hidden danger investigation, and have emergency self-help and escape skills;

3. When the operators find hidden dangers of accidents or other unsafe factors, they should immediately report to the leaders;

Operators have the right to put forward suggestions on safety in production, refuse illegal operations or risky operations, and have the right to stop operations or leave the workplace after taking possible emergency measures when finding an emergency that directly endangers personal safety.

4. Carefully maintain the equipment and facilities, adhere to the good safe operation state of the equipment and facilities, adhere to the clean working environment and civilized production;

5. Operators should do "three no injuries" in the process of labor, that is, do not hurt themselves, others and others;

6. Operators should abide by labor discipline, stick to their posts, concentrate and abide by relevant operating procedures. It is forbidden to wear slippers, barefoot, shirtless and work after drinking; Do a good job in civilized production and keep the job site clean and tidy.

7. Protect all kinds of safety protection devices, and operate control panels, signs, fire-fighting equipment, etc. Don't move or dismantle it at will;

8. After work, it is necessary to cut off the power supply and extinguish the fire, leaving no potential safety hazard, so as to clean up the site after work.

Second, the goal.

1. The satisfaction rate is over 90%;

2. Master rate of safety management system and operating procedures100%;

3. The qualified rate of equipment, facilities and safety fire-fighting equipment maintenance in this position is100%;

4. Reject illegal command100%;

5. All records 100% perfect;

6. The skilled utilization rate of fire fighting equipment is100%;

7. Education and training rate100%;

Third, the reward and punishment assessment methods

According to the Management System for Formulation, Review, Revision and Assessment of Safety Production Responsibility System, the implementation of the responsibility system and the completion of safety production objectives are assessed on February 30th every year, and the assessment adopts a scoring system, and the assessment results are recognized by the department.

Four. explain

1. The head of the department and the employees of the department sign the responsibility letter for production safety, and the employees of the department complete their job responsibilities and objectives one by one, and the head of the department conducts an assessment at the end of the year.

2. See the safety management system for the job responsibilities of warehouse keeper, electrician and welder.

Signature of department employee:

Signature of department head:

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _