In the busy work, 20-2000 is about to pass. In a year's time, with the care and help of leaders and colleagues, I have given full play to my work skills, and my work and business level have made great progress through my continuous efforts. Continuously improve working methods and improve work efficiency. Summarize the past and learn good work experience. Let me sum up my work in 20-2000.
I. Work situation
Our main job is to cooperate with maintenance, emergency rescue, spare parts collection, or clean up the garbage, scrap steel and old spare parts left over from on-site production and maintenance. Can complete the tasks assigned by the leader, check spare parts quickly and safely, and clean up. Sometimes equipment maintenance can actively cooperate with maintenance work. When the equipment maintenance is busy, most of them strive for more than one day at work. Because the car plan is irregular and the demand is tight, I have to run back and forth hundreds of times a day in the workshop, sometimes it takes a long time to repair, so I can't rest if I work overtime. In addition, my car is noisy, the cab temperature is high and the heat dissipation is poor. The whole person is like taking a bath. Moreover, under the working environment of narrow road surface and poor road conditions in our workshop, we all have no complaints, can treat them correctly, work hard and complete various tasks seriously.
Second, security.
At work, we can be strict with ourselves, consciously abide by labor discipline and safety operation rules, seriously study traffic regulations, and strictly abide by traffic regulations and factory rules and regulations. Earnestly complete their own work, so as to achieve the safety production policy of sounding the alarm, putting safety first and putting prevention first. It plays a preventive role. There was no violation of discipline and discipline and no liability accident in the whole year. Under the condition of ensuring driving safety, we have achieved: study hard and constantly improve safety quality. As a driver, when the motor rings, I concentrate and turn the steering wheel, I try my best to ensure safety. Although the driver's job is monotonous, he needs a strong sense of responsibility and cannot be careless when driving. He should concentrate on driving a good car, always want to be safe, prevent accidents everywhere and be safe.
Third, respect discipline and discipline.
Strictly abide by the rules and regulations formulated by the company, do not fight, steal, do anything that will damage the corporate image, respect leaders, unite colleagues and work hard. Concentrate on work, do not violate labor discipline and factory rules and regulations, take the factory as the master and safeguard the interests of enterprises.
Four, the main problems and the next step
1, main problems
(1) Not serious enough, lack of initiative, and insufficient understanding of unsafe factors in the workshop;
(2) Due to poor road conditions, narrow roads and many intersections in our workshop, there are overspeed behaviors caused by unsafe factors;
(3) vehicle maintenance, maintenance, repair is not in place.
2. Next step
In the new year, we will face the production of two machines, which is twice as busy as this year. Then we must do our job well, do not overspeed, overload and other illegal acts, ensure safe production, and strengthen the maintenance, inspection, repair and maintenance of vehicles. Only good maintenance can ensure safe driving. Provide favorable conditions for production and maintenance;
In the new year, we should study traffic laws and regulations harder and strengthen our safety awareness. We should correct our shortcomings, unite as one, do our own work well, strive to better complete the tasks assigned to us, and strive for a higher level of military work.
By the end of 2022, the equipment repairman summed up seven model essays (the second part), and with the concerted efforts of everyone's Qi Xin, the maintenance work was successfully completed in 20 years. On the whole, everything is safe and there are no accidents. But there are also many problems in the work. When workers operate the equipment, the brutal operation has caused great damage to the equipment itself. It is very important to improve the operator's understanding of equipment performance. In addition, the number of personnel and posts for important equipment shall be fixed, and the proficiency in equipment operation shall be enhanced. In this way, he can also maintain the equipment to a certain extent, which will reduce the loss of the equipment itself and reduce the maintenance cost.
The maintenance cost this year is much higher than last year for many reasons. Equipment renovation and lighting renovation in the old workshop are new expenses. There are still many cables that are aging and replaced. The high maintenance frequency of workshop crane is inevitable. Because the utilization rate of our workshop is too high, and some improper operations of workers in use have accelerated the aging and wear of cranes.
Some problems were found when replacing the crane remote control handle this year. The worker threw the handle casually, even the accessories on it were lost, and they were not found. At present, all five handles for changing the remote control in the workshop are broken. There are reasons for the equipment itself, but there are also some reasons that can't keep up with our usual operation and protection. The service life of crane accessories has a great relationship with our usual operation methods. Maintenance only deals with its pathological changes and cannot change its running state. The wear and tear of equipment in harsh environment is many times higher than usual.
We didn't do well in using special equipment. Non-dilution spraying equipment itself has high requirements for environment, painting, use and maintenance. Moreover, the damage caused by our environment and paint to the equipment has been very miserable. The maintenance cost of non-diluted spray equipment can already buy a new equipment. When painting again in the future, the important parts must be cleaned to avoid paint damage to the equipment.
The belt and guard plate of the sander are seriously worn, which leads to a certain cost of purchasing accessories and greatly increases the maintenance workload of the sander. During normal production, the product quality is affected, the rust removal is not clean, and the electricity fee is wasted. Broken maintenance takes a long time, delaying the next process. For the sander, it is necessary to train who will maintain it at ordinary times, and check the equipment before starting and after shutting down every day. See if there are any minor problems and solve them immediately. Don't wait until the broken one doesn't work properly, it's time-consuming and laborious.
The maintenance of welding machine is also a big problem. In the case of increasing output, this problem occurs almost every day, which has a great relationship with the quality of the equipment we buy and is not suitable for long-term continuous operation. The damage rate of a single welder module is high, and this component is also expensive. And the circuit board is seriously damaged. If the module is broken, it will damage the circuit board, so pay attention to the daily maintenance of the welding machine in the future. Do not thicken the dust on the welding machine. Wear, adhesion and short circuit of the welding handle wire will also cause damage to the welding machine circuit board, which should be avoided as much as possible in normal work.
The comrades in the maintenance class have worked hard for 20 years! In order to ensure the normal production of the workshop, we have made painstaking efforts, and thank you for your cooperation. Without your support, we can't successfully complete the maintenance task. In 20____ years, we will make persistent efforts to do a good job in equipment maintenance and reduce equipment loss. For a better tomorrow, we should do our job well. I hope everyone will have an enterprising heart in the new year! First of all, I wish you all a happy New Year!
By the end of 2022, the equipment repairman summarized 7 articles (the second part). In the busy work, 20x years will soon pass. With the care and help of leaders and colleagues, he gave full play to his job skills and made great progress in his work and business level through continuous efforts. Continuously improve working methods and improve work efficiency. Summarize the past and learn good work experience. Let me sum up all the work in the past 20x years.
1, working conditions
Our main job is to cooperate with maintenance, emergency rescue, spare parts collection, or clean up the garbage, scrap steel and old spare parts left over from on-site production and maintenance. Can complete the tasks assigned by the leader, check spare parts quickly and safely, and clean up. Sometimes equipment maintenance can cooperate with maintenance work with heart. When the equipment maintenance is busy, most of them are fighting at work for more than 0/4 hours a day. Because the car use plan is not standardized and the demand is tight, they have to run back and forth in the workshop hundreds of times every day, sometimes it takes a long time to fix it, and they can't rest after working overtime. In addition, my car is noisy, the cab temperature is high and the heat dissipation is poor, so the whole person is like taking a bath. Moreover, under the working environment of narrow road surface and poor road conditions in our workshop, we all have no complaints, can treat them correctly, work hard and complete various tasks seriously.
2. Security aspects
At work, we can consciously and strictly demand ourselves, consciously abide by labor discipline and safety operation rules, seriously study traffic regulations, and strictly abide by traffic regulations and factory rules and regulations. Earnestly complete their own work, so as to achieve the safety production policy of sounding the alarm, putting safety first and putting prevention first. It plays a preventive role. There were no illegal accidents and no duty throughout the year. Under the condition of ensuring driving safety, we have achieved: study hard and constantly improve safety quality. As a driver, I try to make the motor sound, concentrate, turn the steering wheel and pay attention to safety. Although the driver's job is monotonous, he needs a strong sense of responsibility and cannot be careless when driving. He should concentrate on driving a good car, always want to be safe, prevent accidents everywhere and be safe.
3. Respect discipline and discipline
Strictly abide by the rules and regulations formulated by the company, do not fight, steal, do anything that will damage the corporate image, respect leaders, unite colleagues and work hard. Concentrate on work, do not violate labor discipline and factory rules and regulations, take the factory as the master and safeguard the interests of enterprises.
4. Main problems and next steps.
I. Main issues
1, lack of serious work, lack of initiative, and little understanding of unsafe factors in the workshop.
2. Due to the poor road conditions, narrow roads and many intersections in our workshop, there are overspeed behaviors caused by unsafe factors.
3, vehicle maintenance, maintenance, repair and other work is not in place.
Second, the next step.
1. In the new year, we have to deal with the production of two engines, which is twice as busy as this year. Then we must do our job well, do not overspeed, overload and other illegal acts, ensure safe production, and strengthen the maintenance, inspection, repair and maintenance of vehicles. Only good maintenance can ensure safe driving. It brings favorable conditions for the needs of production and maintenance.
In the new year, we should study the traffic laws and regulations harder and strengthen our self-safety awareness. We should correct our shortcomings, unite as one, do our own work well, strive to better complete the tasks assigned to us, and strive for a higher level of military work.
20 1x years have passed in busy and orderly work. Looking back on this year's work, I think there are two main aspects:
First of all, make your own work guidelines:
1, so that every job is operated according to the safety standard process to prevent safety accidents;
2. Visit the store at least once a month, communicate with the store management in time for the problems found in the inspection, solve them directly on the spot, and feed back the problems raised by the store to the department leaders in time, do the work that needs to be done well in the shortest time, find them in advance and solve them quickly, so as to nip in the bud;
3. Adjust the circuit decoration work of the shop, make plans in advance, prepare materials, resolutely not delay the shop decoration, and ensure the high-quality and efficient completion of the work;
4. Communicate with the store by telephone in view of the sudden problems of electricity facilities, initially estimate where the problems are, and lead relevant personnel to prepare related objects and tools so as to quickly troubleshoot after arriving at the scene;
5. Adhere to the principle of saving: try to repair the damaged items in the store, do not replace them with new ones, choose the ones with high quality and low price that really need to be replaced, and collect and sort out all kinds of reusable materials (such as plugs, etc.). ) for reuse;
Second, the main work in the past year:
The main work in June 65438 was the opening of Tianbang Supermarket and the adjustment of Haitan Supermarket. In a month's time, I took the initiative to take the lead, carefully studied with my colleagues in the equipment department, strictly laid out the layout and standardized the construction, and ensured that the opening of Tianbang Supermarket and the adjustment of Haitan Supermarket were completed on time and with good quality.
In February, the main work was the renovation and opening of major appliances in Xin 'an Shopping Plaza. Due to the tight time, there are many places where home appliances need electricity, and it also involves the layout and construction of brands and booths. According to the company's requirements and work flow, we worked overtime and meticulously, so that all the electricity facilities were successfully installed and the water test was successful at one time, which made good preparations for the smooth opening of home appliances in Xin 'an Shopping Plaza on May/KLOC-0.
From March 6 to September, it was mainly the renovation adjustment of the East Building of the head office and the preparation for the opening of Zhuoting Supermarket. The reconstruction of the East Building of the Head Office is this year's project, involving many facilities and heavy workload. The replacement of escalators, the adjustment of circuits, the decoration of suspended ceilings, the follow-up of the decoration of various characteristic pavilions, and the arrangement and follow-up of electricity consumption in characteristic pavilions all require equipment. So I have to work overtime every day for three months, but I am not intimidated by fatigue and workload. I carry forward Nakazawa Tomohide's spirit of not being afraid of hardship and tiredness, work actively and conscientiously, and complete all the tasks assigned by the company with clear thinking, and make my own contribution to the decoration of the East Building of the head office.
In September, with the renovation of the East Building, there were preparations for the new store Zhuoting Supermarket. Originally, the equipment department was understaffed, and the stores near the Mid-Autumn Festival were busy, so there was no staff to be transferred. Facing the work, we have a group of equipment people who are not afraid of difficulties and prepare all the equipment needed for opening in time in strict accordance with the company's requirements. For facilities that need electricity, from the lighting of the main light strip to each socket that needs to be used, the installation of UPS and the electricity construction of tenants are carefully put in place. After unremitting efforts, we successfully completed the transformation of the East Building and the opening of Zhuoting Supermarket.
The main work after 4.9 months, in addition to the daily shop patrol, part of the maintenance work that shops need is to make a statistical summary of the water pipes that need to be insulated in winter in advance, and handle all the water pipes that need to be insulated in each shop to prepare for winter. Another major task is to sort out idle equipment. All the idle shelf equipment and accessories are concentrated in Liuhuapo's equipment warehouse, and everything is sorted out for standby.
In the new year, we will continue to carry forward the spirit of Nakazawa Tomohide, strictly abide by the company's safety operation norms and various management regulations, and complete all the work in a timely, safe, efficient and economical manner under the guidance of leaders.
By the end of 2022, the equipment repairman summed up 7 items (5). I started my internship in the maintenance department of shell factory. It has been more than two years since I graduated from Metallurgical College in July of X. During this period, I worked hard. From an ignorant student youth, he has gradually grown into a little "master" who knows a little about mechanical maintenance, maintenance and safety.
During my work and study in the company, I abide by the company's rules and regulations every day. Never arrive late and leave early, seriously accept the teachings of the masters and actively learn various maintenance techniques. Now through more than two years of study, I have been able to independently judge the maintenance of equipment when I encounter minor problems. For example, the tool rest replacement of Shenyang Six-axis, the parts replacement of gearbox, including more difficult secondary maintenance, and the replacement of spindle bearing can all be operated independently. I can also coordinate with the masters to solve major equipment problems. For example, the gear replacement on the cutting and upsetting machine, the replacement of cold extrusion crankshaft bushing, and the key matching work of Shenyang six-axis distribution shaft. It has been well received by leaders and masters.
10 June, X, transferred to Shell No.2 Factory to continue the maintenance work, and started a new work course on the new work platform. Here, I not only do my own maintenance work well, but also come into contact with the knowledge about mechanics. Such as various equipment reports, safety knowledge, equipment spare parts inventory and planning. In addition, the most important thing is to start the transformation and digestion of equipment. There is still a Delphi six-axis in the process of digestion, and I believe it will be digested by the end of the year. In addition, because the equipment consumption of the top cutter is too high, I am also actively participating in the commissioning of the new Dan Chong purchased by the company. By then, the company will completely get rid of the bad production environment of high consumption and high cost of the top cutter. Moreover, the company is about to produce Outlett screws now, and the output will be several times, so the screw equipment will be very tight. So now actively participate in the debugging and transformation of screw equipment, and lay a solid foundation for the future.
In addition, I would like to put forward some simple views on some equipment management of shell factory:
One: As we all know, "If a worker wants to do a good job, he must sharpen his tools first. If he wants to improve the output and product quality, he must adjust the equipment to this state. However, some of these devices have some problems. For example, the feeding and pressing structure of Delphi integral screw machine can be directly controlled through the operation panel, and the operator sometimes does not need the feeding mechanism to feed when adjusting the equipment. At this time, the operator only needs to press a button, which is simple and convenient to operate and saves time and raw materials. The feeding mechanism of Antuo integral screw machine is mechanical. If the operator does not need to feed, he must go to the end of the equipment to loosen the screw, and then tighten the screw after adjustment. But it often needs to adjust the product model many times, which wastes a lot of time. If you do not loosen the screw and adjust it directly, it is easy to crush the mold. It is really not worth the loss. The equipment actually has this function, but it doesn't work after a long time, so as long as you add controls similar to Delphi equipment, you can save a lot of adjustment time and mold cost for Antuo equipment.
Two: Our company's current maintenance system is a centralized maintenance system, and the maintenance department is responsible for the equipment maintenance of the whole factory. The operator will not help the maintenance worker, and the maintenance worker will not help the operator to look after the bed. This system is most prone to buck passing, and problems cannot be handled in time, which affects maintenance efficiency. Therefore, the first thing we have to do is to break "operators only care about operation, regardless of maintenance;" Maintenance workers only care about maintenance, regardless of the habit of operation; Instead, we should guide everyone to do it: operators should not only take the initiative to clean the equipment, but also take the initiative to take part in the troubleshooting of the equipment. Combined with the point inspection, maintenance and lubrication of the equipment, they should actively check and maintain the equipment while cleaning and improve its condition. Because a large number of equipment failures are due to the failure of maintenance and lubrication work. For example, there are many six-axis equipment in Shenyang, and the spare parts of the equipment are expensive (it costs thousands of dollars to change the spindle bearing). However, the operation of Shenyang six-axis is basically the transmission between cam and gear, and the parts are greatly worn, so the lubrication work is particularly important. Therefore, it is recommended to clean the oil circuit every weekend. If handled properly, the cost of spare parts for our equipment will be greatly reduced.
Thirdly, it is suggested that the computer management of equipment account can be established, just like turning on the computer at any time can see the product model, quantity, shortage and so on produced by which equipment in the month at any time. Computer management of equipment account is to randomly check the factory number, equipment name, equipment model, equipment specification, manufacturer, putting-in-service time, user, etc. Check all the equipment of the company, and check the usage of each equipment at random. When troubleshooting machine tools, maintenance personnel should fill in the "Equipment Maintenance and Troubleshooting Registration Form" to register the reasons, troubleshooting methods and spare parts used. All kinds of troubleshooting, as well as the troubleshooting time, the approval of the person in charge and the operator should be carefully filled in and signed, just like the management of the company now. Rather than a simple equipment maintenance record. This is not only the assessment of maintenance personnel, but also an important basis for finding out the law by year-end fault statistics. This will help us to sum up the maintenance experience of machine tools in time, classify faults and make statistics, which will be of great help to sum up the experience for spare parts ordering and maintenance in the future.
Year-end Summary of Fan Wen, Equipment Maintenance Worker in 2022 7 (6) I. Completion of Daily Work
1 and 20 _ * *, about complete zero maintenance work, including public areas, owners' maintenance and merchants' maintenance. Get praise and recognition from owners and businesses.
2. Strengthen on-site management, supervise the construction of residential decoration units in accordance with the rules and regulations of the management office, without affecting the city appearance and safety management of the residential area, and construct the central air-conditioning and fire-fighting pipes of shops in accordance with technical specifications to ensure the normal operation of the central air-conditioning system and fire-fighting system.
In March, the post responsibilities and workflow were revised again, and on this basis, the work records and equipment operation records were improved, and the post responsibilities were implemented.
4. Copy the water and electricity meter every month, and collect monthly water and electricity billing and management fees in cooperation with finance.
5, _ _ building fire escape reconstruction. The original ring lamp and electronic ballast are about one set of RMB, and the energy-saving lamp after transformation is about one set of RMB, and the transformation quantity is about one set of RMB.
6, _ _ building corridor lighting renovation. The original 36W integrated exhaust lamp is about one yuan, and the modified energy-saving lamp is about one yuan, and the number of modifications is about one yuan.
7. Assist in the transformation of the store's electricity capacity expansion line.
8. Treatment of pump noise. The vibration and noise in the use of domestic water pump house make many owners in Building A complain that the noise of water pump seriously affects their quality of life. This problem has been solved through the transformation of the environmental protection bureau and the construction unit.
9. The underground garage entrance and exit exchange project and outdoor parking lot shall be equipped with sentry boxes and gates. speed bump/hump
10. During the thunderstorm, timely dredge the garbage in the open ditch pipeline in residential areas and do a good job in flood drainage and flood control.
1 1. Follow up the maintenance of the remaining projects in the community. Repair cracks, water leaks, doors and windows, etc. )
Second, the building renovation
According to the company's deployment, with the consent of the group company, the engineering department successfully completed all the construction tasks assigned by the company, saving costs for the company.
1, office decoration on the first floor, safety management department and engineering department.
2. Pour cement on the pavement at the entrance of the underground garage.
3. Laying barrier-free access at the entrance of the sightseeing elevator hall.
4. The green belt in front of the shops on the first floor is paved with blue bricks.
The lawn should be paved with gravel road.
Third, the maintenance of equipment and facilities.
At present, the overall situation of community equipment maintenance is still there. All equipment is maintained according to the equipment maintenance instructions, and daily inspection is carried out, and it is in good working condition at present.
1, complete the operation, maintenance and cleaning of equipment in Daxia core power distribution room in strict accordance with the requirements of operation and maintenance specifications of power distribution system and with reference to the annual work plan. At the same time, the bus duct in the distribution pipeline shaft of each floor should be maintained regularly.
2. Update of elevator inspection method. In view of the frequent elevator accidents, this paper analyzes and summarizes the phenomena not found in the inspection by the engineering department, and improves and perfects the original inspection method. On the basis of the inspection of the original machine room and elevator main engine, the inspection of ride comfort, stability and noise was strengthened, and the car roof operation observation and pit inspection were carried out. Supervise the maintenance unit to improve the maintenance level and eliminate hidden dangers. Strengthen the follow-up supervision of elevator maintenance, so that _ _ elevators can successfully pass the annual inspection of elevators by the Bureau of Quality and Technical Supervision and obtain elevator safety certificates.
3. Do a good job in the daily management of building fire-fighting facilities in strict accordance with the regulations on fire control, and conduct a comprehensive overhaul and antirust refueling of fire-fighting equipment. Standardize the maintenance of fire control facilities and equipment. In order to make emergency lights and evacuation indication system work normally, ensure that every evacuation indicator light, safety indicator light and corridor emergency indicator light is on after the fire, so as to guide the owner (user) to carry out emergency evacuation in an orderly manner and reduce casualties, the Maintenance Regulations for Emergency Lights and Evacuation Indication System is specially formulated and corresponding record forms are issued to standardize the maintenance of emergency lights and evacuation indication system. Find defective lamps in time and carry out maintenance to further improve the operation reliability of fire control facilities and equipment.
4. Maintenance of central air conditioning equipment, monthly cleaning of ceiling cooling tower and chilled water pipeline. Every month, we will investigate the coil fans in one or three stores and repair the coil pipes with different problems in the middle. In May, the machine room and ceiling cooling water pipes were derusted and painted, which improved the safe operation performance of the equipment and ensured the normal supply of refrigeration in summer.
5. The generator should be maintained once a month. During maintenance, the operation should be started for 15 minutes to ensure rapid power generation in case of power failure.
6. Conduct daily inspection of the domestic water pump house to ensure the safe operation of the equipment and create a good living environment for the owner.
7. Maintenance of weak current equipment, comprehensively clean up the weak current tube wells in the building, and cooperate with telecom, China Mobile, China Unicom and other companies to install, repair and maintain the equipment.
8. Summary of nodes prone to problems. Because most of the failures of facilities and equipment are caused by the damage of some important components, such as the failure of water supply system is caused by check valves, solenoid valves and liquid level meters, the failure of burning motor is caused by the damage of AC contactors, and the failure of elevators is caused by various contactors of optical film, door crane, leveler and control cabinet. Each maintenance department is required to gradually establish an equipment failure account, summarize the nodes prone to problems, be aware of them, strengthen the maintenance of this part and improve the safety of facilities and equipment.
In order to strengthen the management of audio-visual education and improve the application level of audio-visual education equipment, according to the work arrangement, the audio-visual education information center carried out lectures, research, general survey and maintenance, special room training and other work in primary and secondary schools in the middle and late September. In this activity, * * * investigated more than 40 schools, listened to 24 power-saving classes, distributed more than 45 questionnaires, and repaired more than 150 audio-visual equipment. The situation is summarized as follows:
First, leaders attach importance to it and the system is sound.
Most school districts and public schools can recognize the importance of audio-visual education, and the school has formulated the work plan of audio-visual education, the school-level information technology training plan and the management system of each professional room in combination with the teaching practice. In this activity, most principals can actively prepare, and carry out their work in the form of research or lectures in view of the existing problems, and implement the responsibility of people and bind them, which has received good results.
Principals accompanying the investigation of audio-visual equipment include: Zhang Shunping from Southern Oriental School District and Xiangcaiying School District, Pang from Xiangcaiying Middle School, Feng from School District, Han Yubin from Ni Xinzhuang Middle School, Li Shitao from Baihe School District, Chen from Liuyuan Middle School, Zuo Jin from du cun School District, Shen from Gou Wei Middle School and Guo Aiyun from No.2 Primary School. The vice principals who accompanied the class were:,,, Li, He Jingyan,, Liang Shuli, Liu Jiang, etc.
Second, the equipment management is in place and the use is standardized.
The audio-visual equipment of most units can be used in the designated special room, registered, incorporated into the fixed assets sequence, and designated persons are responsible for management. The special classroom equipment has good protection, high utilization rate and detailed use records, which gives full play to the role of audio-visual education equipment. Number and classify the audio-visual equipment, register them one by one, and establish an "ID card". Audio-visual teaching resources in most units can be continuously enriched on the original basis, and the utilization rate has been greatly improved. The professional quality of professional room managers has been greatly improved in their work.
Units with good equipment management work include: Zhang Cun School District, South Oriental School District, Zhang Liji School District, Gou Wei School District, Hunan Cuisine Camp Middle School, Liuyuan Middle School, Xingkai School, etc. Schools with high equipment intact rate and utilization rate are: No.4 Middle School, No.4 Primary School, Brick Camp Middle School and West Lamb Middle School. Schools with high equipment intact rate and utilization rate are: No.4 Middle School, No.4 Primary School, Brick Camp Middle School, West Lamb Middle School and Yougeliu Middle School.
Third, information technology teaching has a good order and a strong atmosphere.
Most schools can offer information technology courses above grade three according to the requirements of the information technology syllabus. Information technology teachers can arrange courses with lesson plans and exercises after class. The computer classroom has a computer register with detailed records, which are consistent with the teaching progress. In the classroom, students are scrambling to answer questions, working in groups, and teaching methods such as "one-on-one" and "excellent with poor grades" create a good learning atmosphere.
Information technology courses are offered in South Oriental School District, Zhang Liji School District, Xi Lamb School District, Zhang Cun School District, Baihe School District, Xingkai School, No.1 Primary School and No.4 Primary School. Teachers with strong sense of responsibility, good professional ability and good class effect are: Zhang Haishan, Li Yucai School of Vietnamese Oriental School District, Zhang Hui School of Xiangcaiying School District, Meng Qingke, han cun Middle School of Sun Tao School District, West Lamb Middle School of Zhang Cun School District of Zhang Chunming, Niu Libin of Zhang Yanli, No.1 Primary School and No.2 Primary School of Wang Gai.
Four. Existing problems and phenomena
1. The leaders of individual units don't know much about audio-visual education, and there are no corresponding management systems and measures. The main manifestations are: no work plan, no special classroom system, incomplete files and incomplete records. Insufficient attention is paid to audio-visual knowledge training and the use of audio-visual equipment, and the measures are ineffective. Some leaders can use it more or less, dare not use it, refuse to use it, and are afraid of using it badly and wasting electricity.
2. Equipment management in individual schools is not in place. For example, the equipment of the special room is not used, misappropriated and borrowed, the sanitation of the special room is poor, and even the roof of some units leaks rain, and the equipment is "bathed".
3. In the maintenance of audio-visual teaching equipment, some schools have the idea of "waiting for help", and the damaged equipment can't be repaired in time and can't provide services for teaching normally.