Pay attention to the following points to prevent computer blue screen: make manual backup of important registry files on a regular basis; Try to avoid abnormal shutdown and reduce the loss of important files; For ordinary users, as long as they can run normally, the graphics card, BIOS and driver of the motherboard should not be upgraded; Check the optimized system files regularly, run the system file checker to check the file loss and proofread the version.
◇ Solution:
(1) Use the Windows installation CD for repair and installation;
(2) If you can still enter the safe mode, you can \ \ "start-> Run \\": sfc /scannow
(3) You can also use the method of extracting files to enter the \ \ "Recovery Console \ \" and use the copy or expand command to copy or decompress the damaged files from the CD. However, the blue screen is generally a driver file problem, so in some cases, the expand command will be used, such as the blue screen prompts tdi.sys file, because the driver file is generally i386\\. Drive the compressed package, so use: expand% cdrom: \ \ i386 \ \ driver.cab \ \ f: tdi.sysc: \ \ winnt \ \ system \ \ drivers. (XP is expanding% cdrom: \ \ i386 \ \.
If these blue screen shutdown codes appear at startup
If a blue screen appears when Windows starts and an error message in Appendix 1 appears, then most of the time there is something wrong with the hardware. Please use the diagnostic tools provided by the hardware manufacturer to determine whether there is a problem with the hardware, and go to its website to check whether there is the latest BIOS or firmware update program. If the hardware is ok, reinstall Windows 2K/XP. If the same problem still occurs, you can only ask professional technical support.
If you encounter an error message in Schedule 2, you must reinstall Windows. If the problem cannot be solved, it is recommended to call professional technical support.
1. Fault check information
* * * STOP 0x 000000 1E(0xc 00000005，0xFDE38AF9，0x 000000 1.0 x7e 8 b 0 EB 4)
KMODE_EXCEPTION_NOT_HANDLED ***
The first part of the error is the Stop code, namely STOP 0x000000 1E, which is used to identify the type of the error. The second part of the error is a set of four numbers enclosed in brackets, which represents a random developer-defined parameter (this parameter is simply incomprehensible to ordinary users and can only be understood by driver writers or developers of Microsoft operating systems). The third part is the wrong name. The first line of information is usually used to identify the driver or device that caused the error. Most of this information is concise, but the stop code can be used as a search term in the Microsoft knowledge base and other technical materials.
2. Recommended operation
The second part of the blue screen is the operation information recommended by the user. Sometimes, the recommended actions are just general suggestions (such as going to the manufacturer's website to find BIOS updates, etc.). ); Sometimes, tips related to the current problem are displayed. Generally speaking, the only suggestion is to restart.
3. The debug port tells the user whether the memory dump image has been written to the disk vendor. Using the memory dump image can determine the nature of the problem, and can also tell the user whether the debugging information has been transmitted to another computer vendor and which port is used to complete this communication. However, the information here is meaningless to ordinary users.
Sometimes the security section can find out which production team is responsible for the problem, and will clearly report which document is responsible for the error in the first part, but often it can only find a general scope, but it can't clearly point out the problem. Because the factory is forced to stop completely and start again, sometimes the production team will realize the mistake and will not repeat it. But sometimes it still tries to grab parts, so the factory leader has to repeat the decision to stop working (it can't start and display blue screen information, or when doing the same operation)
Nine conventional solutions after the emergence of blue screen
There are so many blue screen information in Windows 2K/XP that an article can't explain it clearly. However, the reasons usually focus on incompatible hardware and drivers, problematic software, viruses and so on. So first, I will provide you with some conventional solutions, and when you encounter a blue screen error, first eliminate it.
1. Start over
Sometimes it's just that a program or driver has made a mistake for a while and will turn over a new leaf after restarting. (Note: See 7. The stop code is being queried at this time)
2. New hardware
First, you should check whether the new hardware is plugged in firmly. This problem, which is ignored by many people, often leads to many inexplicable failures. If there is no problem, unplug it, try another slot and install the latest driver. At the same time, you should check whether the hardware is compatible with the operating system according to the hardware compatibility category of Microsoft website. If your hardware is not in the list, you should get the website of the hardware manufacturer to inquire or call their consultation number.
[color]
Hardware compatibility list of Windows XP:; 3 14062
Hardware compatibility category of Windows 2K: /download/display.asp? FileName=hcl/Win2000HCL.txt
3. New drivers and new services
If you just installed a new driver for a piece of hardware or software, and it added corresponding items (such as antivirus software, CPU cooling software, firewall software, etc.). ) to the system service, blue screen failure occurs during restart or use, please enter safe mode to uninstall or disable them.
Check for viruses
Viruses such as shock waves and oscillating waves sometimes cause the blue screen of Windows to die, so antivirus is needed. At the same time, some Trojan spyware can also cause blue screen, so it is best to scan and check with related tools.
5. Check the BIOS and hardware compatibility.
For newly installed computers, blue screen problems often occur. You should check and upgrade the BIOS to the latest version, and at the same time close related items in memory, such as caching and mapping. In addition, you should check your hardware according to Microsoft's hardware compatibility list. Moreover, if the motherboard BIOS can't support the large-capacity hard disk, it will also lead to a blue screen and need to be upgraded.
Quote:
Tip:
Cache and mapping items of BIOS
Video BIOS shadow (video BIOS mapping)
Hide Address Range (Map Address Column)
System BIOS can be cached (system BIOS buffer)
Video BIOS cacheable (video BIOS buffer)
Video RAM can be cached (video memory buffer)
6. Check the system log
At the beginning-> Enter: EventVwr.msc in the menu, and enter \ \ "Event Viewer \ \" to appear. Note the items in the System Log and the Application Log that indicate "errors".
7. Query stop code
Write many electronic texts on the blue screen, then surf the Internet on other computers, enter the Microsoft Help and Support website, and enter the stop code in \ \ "Search (Knowledge Base) \" in the upper left corner. If the search results are not suitable, you can choose "English Knowledge Base" to search again. Generally speaking, you will find useful solutions here. Besides,
8. Last correct configuration
Usually, a blue screen appears after updating the hardware driver or adding new hardware and installing its driver. At this time, the "last correct configuration" provided by Windows 2K/XP is a shortcut to solve the blue screen. Restart the system, press F8 when the startup menu appears, and then select Last Known Good Configuration.
9. Install the latest system patches and service packs.
Some blue screens are caused by defects in Windows itself, which can be solved by installing the latest system patches and Service Pack.
Interpreting the meaning of the classic blue screen case
Check BIOS and hardware compatibility
For newly installed computers, blue screen problems often occur. You should check and upgrade the BIOS to the latest version, and at the same time close related items in memory, such as caching and mapping. In addition, you should check your hardware according to Microsoft's hardware compatibility list. Moreover, if the motherboard BIOS can't support the large-capacity hard disk, it will also lead to a blue screen and need to be upgraded.
I believe my answer will satisfy you. All the above websites are ok. Leave him alone. 1.Windows XP has a Bug.
Windows XP has a Bug that failed to shut down. If your computer often has a blue screen when it is turned off, and the failure is intermittent, pressing the "Ctrl+Alt+Delete" key does not respond, then you can be sure that your system is not patched. Please download the SP 1 patch package and patch it. Usually.
2. There is something wrong with the driver of the innovative sound card.
If you use an innovative sound card and a blue screen appears during the shutdown, the error code is "0X0A", then please enter the device manager, delete the sound card, refresh and manually install the latest driver with digital signature.
Logitech mouse and keyboard are not perfect
If you use Logitech's network keyboard and install Key Commander software to drive the corresponding network functions of the keyboard, it may cause the shutdown to become a restart failure. If the driver of your Logitech mouse is MouseWare8.6, it will cause blue screen failure, and the problem can only be solved by uninstalling the driver.
Turn off the power but can't cut off the power automatically.
During the shutdown process, everything is normal, but it stops at "it is safe to shut down" but can't automatically cut off the power supply. You need to manually press the "Power" button on the main chassis panel to turn it off. The reasons for this failure generally include the following aspects:
1. Booting is not supported.
Click Start → Settings → Control Panel → Power Options → High Energy Power Management, and check Enable Advanced Power Management Support.
2.BIOS settings are wrong
It may be that the power management option in the BIOS has been incorrectly modified. If you are familiar with BIOS settings, please enter the BIOS and try to modify the power management options in the BIOS. If you are not familiar with the BIOS, just select the "Load Default Settings" option and restore the BIOS to the factory default settings.
3.office XP is also in trouble.
Ctfmon.exe has always been a controversial issue in Office XP. Ctfmon.exe is a Microsoft text service file. As long as the user installs Office XP and optional user input method components, this file will automatically call it to provide text input support for user input technologies such as speech recognition, handwriting recognition and keyboard. Even though we didn't start Office XP, Ctfmon.exe was still running in the background. That's it, which often leads to shutdown failure. You might as well uninstall it.
Click start → settings → control panel → add/remove programs, select Microsoft office XP professional with frontpage in the currently installed programs, click change, select add or remove functions in the maintenance mode options dialog box, and then click next. The dialog box "Select Installation Options for All Office Applications and Tools" pops up, expand the option of "Office*** Enjoy Functions", select the option of "Optional Chinese User Input Method", select "Do not install" in the pop-up menu, and click the "Update" button.
4.APM/nt old node is not open.
Under normal circumstances, the APM/NT Legacy node is not turned on, which may lead to shutdown, but the power supply cannot be automatically cut off. Enter Device Manager and click View → Show Hidden Devices in the menu bar to display all hidden devices in the system. Check the device list box of APM/NT legacy node options. You will have this option if your computer supports this feature. In the pop-up properties dialog box, double-click and click the Enable Device button.
Windows blue screen error
The 1 0×000000 1 function is incorrect.
2 0×00000002 The system could not find the specified file.
3 0×00000003 The system cannot find the specified path.
4 0×00000004 The system cannot open the file.
5 0×00000005 Access denied.
6 0×00000006 Invalid code.
7 0×00000007 The memory bank control block has been corrupted.
8 0×00000008 There is not enough storage space to process this instruction.
9 0×00000009 The address of the body control block is invalid.
10 0×000000 a environment is incorrect.
1 10× 000000b tried to load a malformed program.
12 0×000000 c access code error.
13 0×0000000D data error.
140×000000 e There is not enough storage space to complete the operation.
150×000000 f The system cannot find the specified disk drive.
160×00000 10 Unable to delete the directory.
160×00000 10 Unable to delete the directory.
17 0× 00000011The system cannot move files to other disk drives.
18 0×00000 12 has no file.
190×00000 13 storage media is write-protected.
The 20 0×000000 14 system cannot find the specified equipment.
2 1 0×00000 15 equipment is not ready.
The 22 0×000000 16 device cannot recognize the instruction.
23 0×000000 17 data error (cyclic redundancy check)
The 24 0×000000 18 program issued an instruction with the wrong length.
The 25 0×000000 19 disk drive cannot find a fixed sector or track on the disk.
26 0×000000 1A cannot access the specified disk or disks.
27 0×000000 1B disk drive cannot find the required sector.
28 0×000000 1C printer has no paper.
29 0×000000 1D system cannot write data to the specified disk drive.
The 30 0×000000 1E system cannot read the specified device.
3 1 0×000000 1F It is useless to connect to the equipment in the system.
32 0×00000020 This process cannot access the file because it is being used by another process.
33 0×0000002 1 Part of the file is locked and cannot be accessed now.
34 0×00000022 The disk of the disk drive is incorrect. Please insert %2 (volume serial number: %3) into drive% 1.
36 0×00000024 There are too many open shared files.
38 0×00000026 Reached the end of the file.
39 0×00000027 Disk is full.
50 0×00000032 does not support this network requirement.
5 10×0000033 The remote computer cannot be used.
52 0×00000034 Duplicate network name.
53 0×00000035 Network path not found.
54 0×00000036 The network is busy.
55 0×00000037 The specified network resource or device is no longer available.
56 0× 00000038 has reached the command limit of network BIOS. 57 0× 00000039 There is something wrong with the network adapter.
The server specified by 58 0×0000003A cannot perform the required job.
An unexpected error occurred in the 59 0×0000003B network.
The 60 0×0000003C remote adapter card is not compatible.
6 10×000003d printer queue is full.
62 0×0000003E server space cannot store files waiting to be printed.
63 0×0000003F The file waiting to be printed has been deleted.
64 0×00000040 The specified network name cannot be used.
65 0×0000004 1 Access to the network is denied.
65 0×0000004 1 Access to the network is denied.
66 0×00000042 Network resource type is wrong.
67 0×00000043 The network name cannot be found.
68 0×00000044 exceeds the name limit of the regional computer network adapter card.
69 0×00000045 exceeds the limit of network BIOS session.
70 0×00000046 The remote server has been suspended or is starting.
7 1 0×00000047 Unable to connect to this remote computer at this time because the number of connections has reached the upper limit.
72 0×00000048 The specified printer or disk device has been suspended.
80 0×00000050 file already exists.
82 0×00000052 Unable to create directory or file.
83 0×00000053 INT 24 failed.
84 0×00000054 The requested storage cannot be used.
The name of the 85 0×00000055 near-end device has already been used.
86 0×00000056 The specified network password is incorrect.
87 0×00000057 parameter error.
There is an 88 0×00000058 data writing error in the network.
89 0×00000059 At this time, the system cannot perform other trips.
100 0×00000064 Unable to establish other system signals. 10 1 0×00000065 belongs to other special semaphores.
1020×0000066 semaphore has been set and cannot be closed.
1030×0000067 Unable to specify semaphore.
1040×0000068 Unable to request a dedicated semaphore during the interrupt.
1040×0000068 Unable to request a dedicated semaphore during the interrupt.
105 0×00000069 The previous ownership of this semaphore has ended.
106 0×0000006A Please insert the disk into% 1.
1070×000006 b The program has stopped because the replacement disk is not inserted.
108 0×000006 c disk is in use or locked.
109 0×000006d pipeline has been suspended.
The system cannot open the specified device or file.
The file name of110× 000006f is too long.
1 120×0000070 Insufficient disk space.
1130× 0000071No internal file identifier is available.
1 140×0000072 The target internal file identifier is incorrect.
1 170× 0000075 The IOCTL call executed by the application is incorrect.
1 18 0×00000076 The value of the write verification parameter is incorrect.
The requested instruction is not supported by the system.
120 0×00000078 This function is only valid in Win32 mode.
12 10× 0000079 semaphore exceeded the timeout period.
122 0×0000007A The data area transmitted to the system call is too small.
123 0×0000007B The file name, directory name or volume label syntax of the storage unit is incorrect.
124 0×0000007C system call hierarchy is incorrect.
125 0×0000007D disk has no volume label set.
126 0×0000007 The specified module cannot be found.
127 0×0000007 The specified program cannot be found.
128 0×00000080 There is no waiting sub-trip.
128 0×00000080 There is no waiting sub-trip.
129 0× 00000081%1This application cannot be executed in Win32 mode.
130 0×00000082 attempted to perform a non-original disk I/O operation using the file handle of the open disk partition.
13 10×0000083 Try to move the file pointer before the beginning of the file.
132 0×00000084 Unable to set the file pointer on the specified device or file.
The 133 0×00000085 JOIN or SUBST instruction cannot be used for disk drives containing prebinds.
134 0×00000086 Try to use the JOIN or SUBST command on the combined disk drive.
135 0×00000087 Try to use the JOIN or SUBST command on the replaced disk drive.
136 0×00000088 The system tried to delete the link relationship of unconnected disk drives.
137 0×00000089 The system tried to delete the replacement relationship of the disk drive that was not replaced.
138 0×0000008 The system tries to combine disk drives into the directory of combined disk drives.
139 0×0000008B The system tried to replace the disk drive with the directory of the replaced disk drive.
140 0×0000008C system tries to replace the disk drive with the directory of the replaced disk drive.
14 1 0×000000 The system tried to replace the disk drive with the combined disk drive directory.
142 0×0000008E system cannot perform JOIN or SUBST at this time.
143 0×0000008F system cannot combine disk drives or replace directories under the same disk drive.
144 0× 0000090 This directory is not a subdirectory of the root directory.
There is still data in 1450×000009 1 directory.
The path specified by 146 0× 0000092 has been replaced.
1470×0000093 Insufficient resources to process this instruction.
The path specified by 148 0×00000094 cannot be used at this time.
The path specified by 148 0×00000094 cannot be used at this time.
149 0× 0000095 The disk drive directory you are trying to merge or replace is the target that has been replaced.
150 0×0000096 configuration. SYS file does not specify system tracking information, or the tracking function is cancelled.
15 10× 0000097 The number of semaphore events specified is incorrect.
1520× 0000098 dosmuxsemwait not executed; Too many semaphores are set.
1530× 000099 Dosmuxsemwait list is incorrect.
1540×0000009 The storage medium symbol length limit you entered.
1550×000009 b Unable to create other threads.
156 0×0000009C receives the trip rejection signal.
157 0×000009d part has been discarded and cannot be locked.
158 0×000009 e segment has been unlocked.
The address of 159 0×000009 f thread ID is incorrect.
160 0×000000A0 The argument string passed to DosExecPgm is incorrect.
1610× 00000a1The specified path is incorrect.
162 0×000000A2 signal is waiting to be processed.
164 0×000000A4 system cannot create thread.
167 0×000000A7 failed to lock part of the file.
The resources required by 170 0×000000AA are in use.
1730×000000ad The locking requirement of the cancellation range is not obvious.
174 0×000000AE file system does not support automatic change of lock type.
180 0×000000B4 system found incorrect part number.
182 0×000000B6 The operating system cannot execute% 1.
182 0×000000B6 The operating system cannot execute% 1.
The file 183 0×000000B7 already exists. Cannot create the same file.
The flag sent by 186 0×000000BA BA is wrong.
The system flag specified by 187 0×000000BB cannot be found.
188 0×000000BC operating system cannot execute% 1.
189 0×000000BD operating system cannot execute% 1.
190 0×000000BE operating system cannot execute% 1.
19 1 0×000000BF cannot execute% 1 in Win32 mode.
The operating system of 192 0×000000C0 cannot execute% 1.
1930× 000000c1%1is not a correct Win32 application.
194 0×000000C2 operating system cannot execute% 1.
195 0×000000C3 The operating system cannot execute% 1.
196 0×000000C4 operating system cannot execute this application.
197 0×000000C5 operating system cannot execute this application at present.
198 0×000000C6 operating system cannot execute% 1.
199 0×000000C7 operating system cannot execute this application.
200 0×000000C8 program code segment cannot be greater than or equal to 64KB.
20 10×00000 C9 operating system cannot execute% 1.
The 2020× 0000000 CA operating system cannot execute% 1.
The 2030× 0000000 CB system cannot find the entered environment option. \r
2050× 0000000 CD is in the instruction subdirectory, and there is no signal sub-processor with any stroke.
The file name or extension of 206 0× 0000000 ce is too long.
207 0×000000CF ring 2 stack is in use.
207 0×000000CF ring 2 stack is in use.
208 0×000000D0 Enter a common file name element * or? Incorrect, or too many common file names have been specified.
209 0×000000D 1 The transmitted signal is incorrect.
2 10 0×000000D2 cannot set the signal processor.
2 12 0×000000D4 section is locked and cannot be reconfigured.
2 14 0×000000D6 There are too many dynamic link modules attached to this program or dynamic link module.
2 15 0×000000D7 cannot nest calls to LoadModule.
230 0×000000E6 pipeline status is invalid.
23 1 0×000000E7 All pipeline instances are busy.
232 0×000000E8 pipeline is closing.
There is no process at the other end of the 233 0×000000E9 pipeline.
234 0×000000EA has more information available.
The operation phase of 240 0×000000F0 was cancelled.
254 0×000000FE The specified extended attribute name is invalid.
The properties of 255 0×000000FF extension are inconsistent.
259 0×00000 103 No data.
266 0×00000 10A cannot use the replication API.
267 0×00000 10B directory name is wrong.
The 275 0×00000 1 13 extended attribute is not applicable to the buffer.
276 0×00000 1 14 The extended properties file on the external file system is corrupted.
277 0×00000 1 15 extended attribute table file is full.
278 0×00000 1 16 The specified extended attribute code is invalid.
278 0×00000 1 16 The specified extended attribute code is invalid.
282 0×00000 1 1A This file system does not support extended attributes.
288 0×00000 120 intends to release a mutex that does not belong to the caller.
298 0×00000 12A semaphore has been transmitted too many times.
299 0×00000 12B only completed some requirements of reading/writing ProcessMemory.
3 17 0×00000 13D system cannot find the message with the number of 0×0000% 1 in the message file %2.