Current location - Quotes Website - Signature design - Forklift safety training content
Forklift safety training content

The contents of the training are as follows:

Forklift safety operation specifications:

1. Check before leaving the vehicle;

2. When you meet someone in front of you while driving, you should signal 5 meters away;

3. The driving speed in the factory shall not exceed 15 km/h, and the speed of the factory doors, elevators, corners, crowded people, narrow passages and other complex areas shall not exceed 1 km/h;

4. when driving, the low point of goods should be .3m ~ .4m;

5. Don't turn too fast to prevent the tendency of "free turning";

6. uphill and downhill should run slowly and evenly, and no turning is allowed on the ramp;

7. Don't drive across the slope. When the slope is more than 1%, you should drive backwards when going downhill.

8. Forklift personnel should reverse when carrying goods forward, if large or heavy goods are out of sight of the driver.

The "eight prohibitions" should be observed in the operation:

1. Single fork operation is not allowed;

2. It is not allowed to drive the goods for a long distance;

3. It is not allowed to pick up the goods by picking up the pallet with a fork;

4. It is not allowed to shovel hazardous chemicals such as chemicals and inflammables directly with forks;

5. It is forbidden to pick up the goods by inertial force;

6. It is forbidden to exile round or easy-to-roll articles with braking force;

7. It is forbidden to bring people to work on the pallet or fork, and it is forbidden to stand under the fork after the fork is raised;

8. it is forbidden to drive horizontally on the sloping road surface.

Start:

1. Before starting, observe the surroundings, and after confirming that there are no obstacles that hinder driving safety, whistle first and then start.

2. For vehicles with hydraulic (pneumatic) braking, the braking hydraulic (pneumatic) meter must be safe before starting.

3. When the forklift truck starts loading, the driver should first confirm that the loaded goods are stable and reliable.

4. Start slowly and steadily.