A, the correct method of wallpaper steps 1, wall treatment
Wipe the wall with a scraper and sandpaper, glaze the cracks and soften them. If the wall is soft or dusty, you can apply glue on the rubber surface first to make the wall harder and stick it on the wallpaper, which is not easy to fall off.
2, wallpaper cutting
The correct way to paste wallpaper is to measure the height of the wall first, and then cut the wallpaper. If you don't add 10 cm floral wallpaper, it will be used to trim up and down. For floral wallpaper, you should consider pattern symmetry. The cutting length should usually be increased by 10 cm or more according to the conditions.
3, wallpaper construction
Measure the vertical line with a centering hammer, and paste the first wallpaper from top to bottom according to the measured vertical line. You have to squeeze bubbles and extra glue to make wallpaper and walls.
Step 4 Trim and clean
Cut from top to bottom to avoid roughness. Then wipe the adhesive with a wet towel or sponge to prevent the wallpaper from turning yellow. If bubbles are found in the wallpaper after drying, cut it with a knife, then inject adhesive and flatten it, so that it can be removed.
5, power switch and socket stickers
The whole door must be closed. Cut two diagonal lines in the middle, create four small triangles, and cut off the extra wallpaper. Finally, wipe the adhesive with a cloth.
Second, the correct way to paste wallpaper-notes 1, wallpaper cutting
The correct way to paste wallpaper, when cutting wallpaper, a single frame is longer than the actual wall length, and the typical distance is about 10 cm. You can save the rest of the wallpaper for later repair.
? Step 2 soften the wallpaper
Stick the bottom material of wallpaper evenly with a scraper, stick it together, stick protective tape on the folded wallpaper and soften it for a period of time. Put protective tape in the bonding process, and the wallpaper surface will not be bonded when folding.
3, packaging wallpaper
The correct way of wallpaper, when placing the desktop, you can use this tool to determine the width and height of the desktop, and pay attention to the rest of the upper and lower edges. Be careful when setting wallpaper. If the adhesive becomes dry or sticky, do not lift the wallpaper for calibration.
4. Clean and trim wallpaper
Sew overlapping patterns and cut off the overlapping parts of the wallpaper. The glue scraped from wallpaper glue and panel glue can be wiped with a sponge.
5, check the packaging
The owner must check the wallpaper layout and keep the signed and verified documents. In particular, you need a warranty. Please pay attention to future warranty issues.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~