Modify the company's safety management rules and regulations and general rules in combination with the company's actual situation. Article 1 Strengthen the protection of the company's production and work, improve working conditions, protect the safety and health of workers in the process of working, and promote the company's career development. According to the Labor Protection Order and the actual situation of the company, the Regulations and other relevant regulations are formulated. Article 2 The company's safety production work must implement the policy of safety first and prevention first. General manager (designated representative) responsibility system. Leaders at all levels should adhere to the principle of managing production and ensuring safety. Production should serve the needs of safety and realize safe and civilized production. Article 3. Rewards shall be given to those who contribute to production safety. Those who violate the operating rules of the safety production system and cause accidents should be dealt with severely, and those who violate the criminal law should be handed over to the department for punishment. Organization and responsibilities Article 4 The leading organization of the company's safety production is led by the company, and the relevant departments are mainly responsible for organizing its main responsibilities: fully responsible for the company's safety production management, researching and formulating technical measures for safety production, implementing labor protection plans, and carrying out safety production inspection, supervision, accident investigation and handling. Responsible for handling Article 5 The production unit of the company must set up a safety production leading group, be responsible for the safety production education of its employees, formulate detailed rules for the implementation of safety production, carry out safety supervision and inspection, and implement the safety instructions of the safety committee, so as to ensure that the safety production group is headed by the leaders of all units, and be equipped with full-time (part-time) safety production administrators as required. The production team should be equipped with a full-time security officer. Article 6 The main responsibilities of work safety are: the first person in charge of work safety, the first person in charge of work safety, and the full-time (part-time) job of work safety manager. Seventh engineering and technical personnel at all levels to examine and approve technical solutions and cases. Drawings and various technical documents must ensure the accuracy of using safety technology and labor hygiene technology. Eighth functional departments must do a good job in the work of production safety within the scope of business. Article 9 Responsibilities of the company's full-time production safety management cadres: 1. Assist leaders to implement labor protection orders and comprehensively manage safety production. 2. Summarize and review the safety production measures plan, and urge relevant departments to implement it on schedule. 3. Formulate and revise the safety production management system, and supervise and inspect the implementation of some systems. 4. Organize the inspection of exhibition safety production. After in-depth on-site guidance and protection of production and labor, China has the right to stop production and immediately report it to the leaders for study and handling. 5. Summarize and popularize the advanced experience of safety production, and assist relevant departments to engage in professional training of safety production publicity and education. 6. Participate in the review of design documents, project acceptance and trial operation of new construction, reconstruction, expansion and repair projects. 7. Participate in the investigation and handling of casualty accidents, be responsible for the statistics and analysis of casualty accidents, assist relevant departments to put forward accident prevention measures, and supervise the implementation according to relevant regulations. 8. Formulate the labor protection articles of this unit according to relevant regulations. 9. Organize relevant departments to study and formulate preventive measures against occupational hazards and supervise their implementation 10. Guide grass-roots units to convey information feedback. Article 10 Full-time (part-time) safety production management personnel of production and business operation entities shall assist leaders in implementing labor protection laws and regulations and safety production management systems, and handle safety production affairs of their own units. Inspection and supervision of production safety Article 10 The safety personnel of production teams in each computer room shall be inspected. Supervise the members of the building (room) and class to abide by the operating rules of the safety production system, do a good job in the safety inspection and maintenance of equipment and tools, report the production situation of the building (room) and safety team to the superior, and do a good job in the registration and custody of original materials. Twelfth workers in production and work, should seriously study and implement the safety technical operation rules, abide by the rules and regulations, take good care of the safety protection devices, facilities and labor protection articles of production equipment, and report the safety situation to the leadership in order to eliminate it quickly. Education and Training Article 13 New employees, temporary workers, migrant workers and interns must first receive three-level safety education (i.e. production units, machine building (rooms) or teams and groups, production posts) before they can enter the operation posts. Workers who change jobs must receive safety education again before they can take up their posts. Article 14: Special operators such as boilers, pressure vessels, elevators, electricians, lifting, welding, vehicle drivers, pole line operators and inflammable and explosive operators must receive professional safety technical training, pass strict examination by relevant departments and obtain operation certificates (certificates) before they can operate independently. 4. Equipment, engineering construction and workplaces must receive sex safety education. Fifteenth all kinds of instruments and equipment are overloaded with diseases and must be used correctly. Old equipment that meets the safety requirements after regular maintenance should be updated and reformed in a planned way. Article 16: Electrical equipment wiring shall meet the safety requirements for entering the house. Electrical equipment should be fused to prevent leakage, and the insulation must be good or have zero protection measures. Sealed electrical equipment should be used in workplaces where steam, corrosive gas or dust is generated; Flammable and explosive workplaces should be equipped with explosion-proof electrical equipment; Mobile electrical equipment in wet places should be safe voltage electrical equipment, which must meet the safety technical requirements of the corresponding protection level. Seventeenth imported external equipment must be equipped with safety accessories that meet my safety requirements. Eighteenth where the new construction, renovation, expansion, relocation of production sites and technical transformation projects, we must arrange the construction of labor protection facilities, and simultaneously design, construct and put into operation with the main project (hereinafter referred to as the "three links"). Nineteenth engineering construction departments should organize the completion and acceptance of engineering design, and improve the protection facilities. The evaluation report on the completion quality of the design case has been examined and accepted by the labor institutions of the labor, health and safety departments at the same level, and signed and sealed. Forced construction and commissioning without the consent of the department shall be investigated for the responsibility of customs officers. Article 20 The layout of the workplace should be kept reasonable and tidy, and facilities for toxic operations must be protected. Twentieth production sites and buildings must be solid and safe; The channel should be smooth and well lit; Necessary safety facilities in pits, ditches, pools, platforms, elevators and other dangerous places. It is obvious. Safety signs Article 22 Effective protective measures must be taken in dangerous workplaces such as high temperature, low temperature, humidity, thunder and lightning, static electricity, etc. Article 23 The competent unit shall strengthen the management of employing external employees to carry out construction operations on the company site. If it is necessary to implement the work permit system and cause property losses to the company, you must claim compensation and deal with it strictly. Article 24: Hiring construction personnel must enter the computer room, and the security department must be responsible for the construction of the computer room. Operators who need to work with naked flame must fill in the Application Form for Open Flame Operation of the Company and go through relevant formalities. V. Telecommunication Lines Article 25 The design, construction and maintenance of telecommunication lines shall comply with the safety technical regulations of the Ministry of Posts and Telecommunications. All personnel involved in the construction and maintenance of telecommunication lines must strictly implement the technical operating rules for the safety of telecommunication lines. Twenty-sixth telecommunications line construction units must organize the construction of overhead lines, wires and flat cables in accordance with safety construction regulations. Corresponding safety protection measures must be taken for telecommunication construction projects such as pipelines and the construction environment. Construction tools and instruments must be qualified, sensitive and safe, and rely on aerial work tools. Protective equipment must be provided by the management department of professional manufacturers, and regularly checked and identified. Article 27 The maintenance of telecommunication lines should strictly prevent electric shock. Before the line maintenance in the accident of falling from a height, it is necessary to check whether the pole foundation is firm. The circuit is checked for safety. The operation of power line communication lines should pay close attention to the safety impact of operation. In strict accordance with the operating rules, it is allowed to hire or retain retired employees for line erection work. Inflammable and explosive articles Article 28 Fire prevention facilities must be set up for the transportation, storage, use and disposal of inflammable and explosive articles. Explosion-proof facilities strictly implement safety operation rules, personnel quota and various safety regulations. Twenty-ninth storage points should use flammable and explosive materials. Fireworks and firecrackers are strictly prohibited. Strictly eliminate the hidden dangers of ignition and cutting. Open flame inspection equipment should be used. Appropriate protective measures must be taken and special monitoring must be carried out after approval by relevant leaders. Article 37 Prevention of Occupational Hazards of Protective Articles According to the nature of work, employees shall be equipped with or distributed with protective articles in accordance with labor regulations. All units must educate employees to use protective equipment and understand its use, performance and on-the-job operation. Thirty-eighth dust, gas and radiation protection should be done. The heatstroke prevention and cooling work, noise prevention projects, sexual hygiene monitoring, excessive household hygiene and toxic workplaces should be technically reformed or sanitary protection measures should be taken to improve working conditions, and health food subsidies should be distributed according to regulations to improve the health level of toxic workers. Article 39 Toxic workers shall implement the system of regular occupational physical examination, and those who suffer from occupational diseases shall immediately report to the company affairs department, and the affairs department or the company safety committee shall adjust their posts as appropriate to make a decision on treatment or recuperation. Article 40 It is forbidden to be over 654 years old. Young people aged 38+08 may not arrange for employees to be pregnant and breastfed, which will affect the health of the fetus and baby. Nine. Fortieth adhere to the regular or irregular safety inspection system. The Company Safety Committee shall organize at least two company-wide inspections; Each production unit shall check at least once every quarter; Each machine building (room) production team shall implement the pre-shift inspection system; Operators of special types of equipment should carry out every inspection. Fortieth, if potential safety hazards are found, they must be rectified. If it can be rectified, it should be immediately reported to the office of the safety Committee for rectification. Forty-third the expenses required for the rectification of production safety shall be examined and approved by the Office of the Safety Committee, and the funds for labor protection and technical measures shall be included in ten items. Rewards and Punishment Article 44 The Company's work safety in production shall be summarized and evaluated by the Office of the Company's Work Safety Committee. Article 45 The basic conditions for safe production of advanced collectives are: 1. Conscientiously implement the policy of safety first and prevention first, implement the safety production regulations, implement the general manager responsibility system, and strengthen the safety production management; 2. Improve measures taken by members of safety production organizations to demonstrate energy efficiency; 3. Strictly implement the rules and regulations of safety production, enhance the safety awareness of employees and improve their self-protection ability through safety production education; 4. Strengthen safety inspection, rectify accidents and hidden dangers of dust and poison, and actively improve working conditions; 5. The deaths, serious injuries and traffic accidents of employees who have been responsible for three consecutive times have gradually decreased. Remarkable achievements have been made in safety production. Article 46 Advanced conditions for safe production: 1. Abide by all safety production rules and regulations, all operating procedures and labor discipline to ensure safety in production; 2. Actively learn safety knowledge, improve safety awareness and self-protection ability; 3 resolutely oppose violations of safety regulations, correct and stop illegal operations and illegal command. Article 47 Those who have made special contributions to production safety shall be given special awards. Forty-eighth major accidents or fatal accidents (including traffic accidents), the unit (room) where the accident occurred shall be punished by withholding the total wages, and the leadership responsibility of the unit shall be investigated. Article 49 An accident shall be reported to the unit (room) where the accident occurred in accordance with relevant regulations, including concealment, false reporting, omission or deliberate delay. Give the punishment of withholding the total wages, and investigate the responsibility of the relevant responsible person. Those who violate the criminal law shall be investigated for legal responsibility. Fiftieth the person responsible for the accident shall be given criticism, education and economic punishment according to the situation. If the administrative department touches the criminal law, it shall be punished according to Article 50. The penalty for withholding the total wages by the unit exceeds 3%; Punish employees for exceeding production bonus (including compensation) and punish the administrative department. Article 52 Due to various accidents (including), factory workers' casualties or factory equipment damage or production damage, the accidents of this enterprise are divided into three types: industrial accidents, equipment (building) damage accidents and traffic accidents (the system of vehicles, drivers and traffic accidents shall be formulated and organized separately by the administrative department with reference to these Provisions). Fifty-third industrial accidents refer to the physical injuries suffered by employees in the process of labor. Sexual poisoning accidents in China include several situations: 1. Injury or death caused by working in the post or task assigned or agreed by the competent leader. 2. Illness, injury or death caused by enterprises or social welfare (emergency rescue, disaster relief, etc.) in China. ) .3. Injury or death caused by working in a post or workplace approved by the leader. 4. Occupational diseases and deaths caused by work. 5. Take the plane and vehicle of the company and listen to the report. Participate in the administrative assignment of all kinds of employees to pick up and drop off vehicles in the class designated by the unit, and the vehicle will not be responsible for accidents that cause casualties of employees. 6. Although employees are injured or killed due to the good equipment, facilities or working conditions of the enterprise, Article 54 Injuries suffered by employees in accidents: 1. Minor injury: refers to stopping work due to injury, and the work is below the standard 105, which is not serious enough. 2. Serious injury: refers to the disability injury that meets the requirements. Total work loss exceeds 105 disability injury 3. Death Article 55 Casualty accidents (including traffic accidents) are classified according to the degree of economic loss: 1. General accidents: accidents with economic loss 1 10,000 yuan; 2. Accidents: accidents with economic losses of 1 1,000 yuan or more and 1 1,000 yuan or more; 3. Extraordinary accidents: accidents with economic losses of more than 654.38+10,000 yuan and 1 10,000 yuan; 4. Extraordinary accident: accident with economic loss 1 10,000 yuan. Article 56 The accident unit must handle the accident according to the accident handling procedure: 1. The staff at the scene of the accident should immediately rescue the wounded, protect the scene and prevent the accident from expanding. It is necessary to record the symptoms in detail or take photos, and draw the scene map of the accident. 2. Immediately report to the competent department (leader) of the unit. The unit reporting the accident shall immediately report to the office of the company's safety committee. 3. Show the accident investigation and analysis report. After receiving the accident report, the safety committee office of the original company shall promptly instruct relevant units to investigate minor or general accidents. The accident investigation report shall be submitted to the relevant departments within 30 days after the accident. The investigation and handling of accidents should be supervised by trade unions. 4. Formulate corrective and preventive measures. 5. Properly handle the accident responsibility. 6. Notify the accident and analyze the accident, etc. Educate employees about Article 57 injuries. Fatal traffic accident 1. Motor vehicle driver has an accident. Drivers and customs officials must assist the traffic management department in accident investigation. The accident handling unit shall report the analysis of accidents or fatal accidents to the Safety Committee Office within 24 hours. If the accident is reported in writing, the perpetrator shall write a written report to the unit leader within two days. The accident unit shall report the accident report together with the unit and send it to the safety committee office within seven days. 2. Strengthen the principle that the public security department decides that the person responsible for the accident will punish the driver for economic loss 10%, and the accident finance department will pay high liquidated damages. The total bonus of flat production (base 1.0) is limited. 3. Without the decision of the traffic control department, if the company's economic loss exceeds the deductible stipulated by the insurance company, the excess shall be borne by the actor. 4 unauthorized misappropriation of vehicles causing personal accidents, according to the provisions of the second paragraph double punishment; Deduct bonuses or administrative sanctions as appropriate. 5. Any private matter caused by borrowing the bus with the consent of the competent leader shall be handled with reference to paragraph 2. 6. Every time the accident increases, the bonus will be deducted within three months (both of which are concealed). 7. Without the approval of the Administration Department, hand over the sick vehicle to the witness or drive the company's vehicle. The bonus will be deducted every two months. Article 58 Find out the cause of the accident, analyze the cause of the accident and deal with the person responsible for the accident. The labor department has the right to make concluding comments and submit them to the units and competent departments for handling. Article 59 Investigate and handle accidents of dereliction of duty and abuse of power. Those who practice favoritism and malpractice shall be investigated for administrative responsibility, and those who violate the criminal law shall be investigated for criminal responsibility. Article 60 If leaders or cadres and workers of units at all levels perform or do perform their due duties within the scope of their duties, they shall be punished as dereliction of duty: 1. Implement relevant rules and regulations. Take measures or means to create serious casualties. 3 accept the reasonable opinions of the competent department of management and supervision. 4. Work safety is sloppy. 5. Safety inspection, supervision and guidance are laissez-faire. 6. Delay the installation and repair of safety protection equipment or equipment, and repair safety protection equipment 7. Illegal and risky operation or leaving the post without permission or overload operation. 8. Dangerous equipment, machines, switches and signals are prohibited. 9. Obey instructions and advice to conduct illegal operations 10. The construction unit or individual operation unit has made serious mistakes. Article 60 All units shall formulate specific implementation measures according to these Provisions. Article 62 The Office of the Company's Safety Committee shall be responsible for the interpretation of these Provisions. Article 63 The customs clearance system and regulations formulated before the implementation of these Regulations shall be implemented in accordance with these Regulations.