3 simple contract production agreement templates

Entrusted production is the act of a unit that is legally registered with the industrial and commercial department but does not have the production conditions and qualifications to entrust a unit that is legally registered with the industrial and commercial department and has the production conditions and qualifications to produce and process products. How to write a commissioned production agreement? The following is a sample commissioned production agreement that I compiled for everyone. Welcome to read it.

Sample of Entrusted Production Agreement 1

Client: (hereinafter referred to as Party A)

Client: (hereinafter referred to as Party B)

In line with the principle of reciprocity and mutual benefit, both parties have reached this "Entrusted Production Agreement" after full discussion and negotiation. The content is as follows:

1. This agreement will take effect upon signature. The cooperation between the two parties is based on this "Agreement". 》The content specified shall be implemented.

2. Anhui Wandu Metal Components Co., Ltd. (hereinafter referred to as the client) entrusts Chengde Ludi Electric Power Equipment Manufacturing Co., Ltd. (hereinafter referred to as the trustee) to produce iron component products. The qualifications and trademarks of the trustee Enjoyed exclusively by both parties, the quality and acceptance standards of the products are strictly in accordance with the first batch of agreement inventory bidding of State Grid Jibei Electric Power Co., Ltd. in 20_, bidding number: JBXY-HW-ZB01, package number: Package 5-iron components All contents of the bidding documents are standard. The delivery location shall be as specified in the contract of Jibei Electric Power Co., Ltd. All costs for ground delivery (including freight, loading and unloading fees, inspection fees, drawing fees, business fees, etc.) shall be borne by the trustee. bear. The entrusted party is willing to accept the entrusting party's winning bid for State Grid Jibei Electric Power Co., Ltd. 20 at a price of 4,950.00 yuan/ton for a single piece, and the total price is in RMB: 1,350,000, 65,500,000 yuan (?135,065.70 yuan). The first batch of agreed inventory materials in _, bidding number: JBXY-HW-ZB01, package number: Package 5 - iron components: 27.286 tons of winning bidders from Weichang County, Chengde, strictly in accordance with the contract and technical agreements to provide corresponding products and services, and promise In addition to the deviations stated in the commercial deviation table, the delivery time required by the documentation is met. The trustee shall be solely responsible for all losses caused by delays in construction.

3. The processing of metal tools shall be based on the technical specifications submitted by the customer (attached to the technical specifications). If there are any problems with the quality of the products entrusted to be produced, the entrusted unit shall be fully responsible. After this agreement is signed, it will be delivered to the user within the time limit specified in the technical specifications. After the acceptance is passed, the trustee will provide the ERP system material list after the materials have arrived and signed and stamped (material arrival inspection receipt, material arrival payment confirmation form , warehouse-in slip, warehouse-out slip) shall be submitted to Jibei Electric Power Company.

4. The trustee needs to issue 17 special value-added tax invoices. The entrusting party shall remit the payment to the entrusted unit within ten days after receiving the payment from Jibei Electric Power Company.

5. If there are any matters not covered in this agreement, both parties will negotiate and sign a separate agreement, which will be equally valid as this agreement.

6. Once this agreement is signed, both parties must abide by it. If they have any objections and the negotiation is unsuccessful, they may apply for arbitration to the local arbitration committee.

7. This agreement is made in four copies, with each party holding two copies. The fax is valid.

Party A (official seal): _____________ Party B (official seal): _________

Legal representative (signature): _____________ Legal representative (signature): _________

_________year____month____day_________year____month____day

Sample of entrusted production agreement 2

Party A: (hereinafter referred to as A Party)

Party B: (hereinafter referred to as Party B)

In order to give full play to its market advantages and expand the development of the brand market, Party A has decided to engage in the production and sales of transmission-type high and low-voltage motor soft starts. However, according to the national compulsory certification requirements for high and low voltage electrical products, Party A has created conditions to obtain product CCC certification.

Through negotiations with Party B, the marketing concepts and strategies of both parties are consistent. Based on the principle of "mutually beneficial cooperation, mutual benefit and win-win", the matter of entrusting Party B to produce a series of high and low voltage electric soft starter products has been agreed upon by both parties through friendly negotiation. This agreement is entered into as the basis for Party A and Party B's ODM project cooperation and subsequent purchase of products and services.

1. Products commissioned

1. Party B considers that Party A is familiar with the market and has rich customer resources and marketing capabilities, and provides Party A with a series of transmission products. Party B promises that all products provided will obtain valid CCC certification. The products strictly comply with the requirements of the quality assurance capabilities of CCC certified factories. Party A shall provide Party B with ODM certification for the CCC certified products provided by Party B before they can be sold in the market.

2. The products Party A entrusts Party B to produce are high and low voltage electric soft starter series and frequency converter series. Party B accepts Party A's entrustment and promises that the products produced must comply with national standards and quality standards. , meet Party A’s technical requirements, and be responsible for the quality of the products produced.

3. Party B organizes production according to Party A's needs. The specific specifications and quantities of the products are subject to Party A's order, and the products are delivered to Party A according to the time specified in the order.

4. Party B will cooperate and assist in solving special situations in Party A’s sales services. However, it does not bear any legal responsibility for the claims and debts incurred during the operation of Party A's enterprise.

5. The ODM products that Party B is responsible for producing shall be consistent with the certified products. If there are any changes in structure or key parts, the changes may only be made with the approval of the certification body.

2. Product brand and packaging

1. For the high and low voltage electric soft starter series and frequency converter series products that Party A entrusts Party B to produce, Party B must provide those products that have passed the factory inspection. Products, products and packaging provided to Party A shall not have nameplates and signs with the company name on them, and shall implement "neutral" inner and outer packaging. If a special brand and model of product is required, this should be stated in the order.

2. Party B shall not use or label the products with the name, model and address of Party A’s company for external sales.

3. Product market constraints

1. Party A should actively establish a market and marketing network for transmission series products, strive to expand product marketing, and increase the total production volume of commissioned products.

2. Party A shall not carry out sales activities to Party B for the projects in the picture above and the projects that have been tracked, or engage in malicious market competition.

3. Party B and its marketing channels are not allowed to engage in low-price dumping of products and malicious market competition with respect to the projects shown above that have been market designed by the design institute and projects that have been tracked and established basic relationships.

4. Product supply price

1. Party A should develop the market as quickly as possible, establish a sales organization, develop a marketing network, and carry out business under Party A’s brand The marketing work of transmission series products shall bear the marketing expenses incurred in the process of market development and product sales.

2. In view of the investment risks in product marketing borne by Party A, Party B shall make every effort to support Party A in actively carrying out marketing work and provide Party A with the most favorable supply price for transmission series products, which shall be determined in detail The preferential price for product supply is Party A’s market price.

3. If Party A’s annual entrusted production volume and reimbursement amount exceed 5 million/year (RMB: Yuan), Party B will give a rebate of 3; if Party A reaches 10 million/year (RMB: Yuan) For the above, Party B will give a rebate of 5%; if Party A’s entrusted production volume continues to expand, both parties will then renegotiate to establish a new execution price.

5. Payment Settlement

1. For the transmission series products provided by Party B to Party A, the payment settlement in the early stage of cooperation shall be based on the principle of spot and cash payment; after entering the normal period of cooperation, Party B shall provide Party A with financial support of RMB 30 of the purchase price every month for three consecutive months, with the RMB 30 of the first month paid off in the fourth month, and so on.

2. The transportation and miscellaneous expenses of the transmission series products from Party B to Party A’s location shall be borne by Party A.

6. Confidentiality Clause and Liability for Breach of Contract

1. After this agreement comes into effect, both parties must strictly abide by the provisions of this agreement and perform them conscientiously in line with the principle of good faith

2. In view of the fierce competition in the product market, in order to ensure the legitimate rights and interests of both parties, both parties have the obligation to keep confidential the entire contents of this agreement. Neither party shall disclose the relevant contents of this agreement to any third party. If there is a violation, the breaching party must bear the resulting economic losses to the other party and compensate the other party for the corresponding benefits available.

3. If Party B breaches the contract or stops supply without reason during the cooperation process, Party B must make unconditional compensation based on the total marketing expenses of Party A.

4. If any disagreement, dispute or dispute arises, the two parties should first resolve it through friendly negotiation based on the premise of this agreement; if the negotiation fails, either Party A or Party B may go through legal proceedings in accordance with the law. be resolved.

5. Party A shall not use similar products of other manufacturers during the cooperation period. If this happens, Party B has the right to immediately terminate the agreement, and Party A shall return the products involved when this agreement is terminated. The design drawings and instructions are given to Party B; within 2 years after the termination of the agreement, Party A cannot produce and sell similar products.

6. If Party A violates the provisions of this Agreement or unilaterally terminates this Agreement, Party B has the right to require Party A to pay liquidated damages of RMB 200,000.

7. Others

1. This agreement is long-term and has no fixed term. This agreement was signed on October 8, 20_, and will take effect after being signed and sealed by both parties; The agreement is made in two copies, with Party A and Party B each holding one copy. Relevant content should be extracted from Party A’s and Party B’s internal execution documents and separately distributed to the marketing and finance departments.

2. After this agreement takes effect:

① Party B shall fully support Party A’s application for the national compulsory product CCC manufacturing certificate, and provide all drawings and documents required for relevant applications material. Party B will notify Party B as soon as possible during the subsequent review and changes of CCC certified factories to ensure that the CCC certificate held by Party A is valid and responds to changes in a timely manner.

② When Party A applies for ODM certification of CCC certified products, the product name and product model applied for must be in accordance with Party A’s requirements, and all relevant information and other materials provided by Party B to Party A must be true ,efficient.

③ Party B shall provide electronic samples and selection data of the transmission series products, as well as technical drawings and data such as nameplates involved in internal and external packaging objects, to support Party A in the process of solving the processing and production of nameplates and other packaging objects by itself. .

④ In the early stage of cooperation, Party B is responsible for the pre-sales and after-sales services of the transmission series products sold through Party A. Party B must carry out maintenance, debugging and other work in the name of Party A, while Party A Bear the corresponding expenses; at the same time, Party B will make every effort to train Party A's service personnel, form a professional service team, and gradually transition to Party A's full responsibility for product services.

3. Matters not covered in this agreement can be stipulated in a supplementary agreement during the performance process.

Party A (official seal): _____________ Party B (official seal): _________

Legal representative (signature): _____________ Legal representative (signature): _________

_________year____month____day_________year____month____day

Sample of entrusted production agreement 3

Party A:

Party B:

Party B authorizes and entrusts Party A to process and produce branded interior wall tiles.

In line with the principles of honesty and trustworthiness, fairness and justice, mutual benefit, complementary advantages, and a win-win situation, both parties ensure the legal rights and obligations of both parties and reached the following agreement after negotiation, which both parties must abide by.

1. Party B shall provide Party A with the "Authorization Letter" of the trademark holder of the brand. The contents of the "Authorization Letter" in Appendix 1 shall be deemed as the conditions of the contract.

2. Party B shall provide Party A with a copy of the "Letter of Power of Attorney", see Appendix 2 and related procedures. The contents of the "Power of Attorney" shall be deemed as conditions of the contract. The trademark must be legal, and Party B will be responsible for any legal disputes arising therefrom. When Party B processes and sells to Party A, Party A will be responsible for the industrial, commercial, tax and other expenses involved within Party A's company, and Party B will be responsible for the industrial, commercial, tax and other expenses outside the company.

4. During the period of this contract or after the termination of the contract, the trademark ownership belongs to Party B.

5. Party B shall provide Party A with product designs, samples, packaging design, etc. for entrusted processing and production. Party A shall actively cooperate and, after Party B seals the sample and approves it in writing, according to the plan required by Party B, The processing and production notice issued shall carefully arrange the production without delay. Party B shall not produce the designs and varieties produced by Party A. Party A is not allowed to produce the designs and varieties produced by Party B. (Except for special designs and colors, they can be produced together after mutual agreement and approval by both parties).

6. Party B underwrites all products entrusted to Party A for processing and production (except first-class and qualified products). Party A shall provide assistance in all business activities of Party B, including planning and sales management, and shall not sell by itself. Products entrusted by Party B to be processed and produced.

7. Party B shall notify Party A in writing three days in advance of the bricks used in the project, and Party A shall give priority to production.

8. Party B pays Party A RMB 10,000 as a production deposit (including production molds, cartons, foam, etc.). After Party B receives the deposit, Party A can produce box bricks for Party B and store them in Party A's warehouse.

9. If Party B’s production plan exceeds the quantity specified in the deposit, Party B must transfer the excess quantity to Party B’s warehouse.

10. Party B must place an order of 10,000 boxes with Party A every month. If Party B fails to complete the order plan of 10,000 boxes for two consecutive months, except during Party A’s maintenance period, Party A will treat Party B as automatically withdrawing from the order plan. Only then can you add other order plans.

11. Settlement method for picking up the goods: Party B will pick up the goods in cash.

12. Party B entrusts Party A with processing and production for a period of one year, and the extension will be discussed later. When the contract is terminated, both parties can negotiate and resolve the matter one month in advance. The inventory products will be processed or shipped out by Party B within days after the termination of the contract, and then the production deposit will be settled.

13. The products that Party B entrusts Party A to produce and process are tentatively priced at 30×45 Haobai 3.1 yuan for high-quality products (11 pieces) and 2.8 yuan per piece for 30×45 crystal including packaging and processing. 30×60 Haobai is 4.6 yuan per piece. 30×60 crystal is 4.2 yuan per piece. 350×750 Haobai is 7.6 yuan per piece. 350×750 crystal is 7.1 yuan per piece. 30×30 Haobai is 1.85 yuan per piece. 30×30 matte is 1.7 yuan per piece. Dark bricks, roller bricks, and special-shaped bricks will be priced according to the prevailing market price upon mutual agreement. 14. For products shipped from Party A’s warehouse, Party B will be responsible for shipping freight and loading fees, with Party A assisting. 15. If Party A improves product quality at the request of Party B and causes an increase in costs, it shall negotiate with Party B before production and confirm in writing before arranging production and settle the product at the confirmed price.

16. Party A arranges processing and production for Party B. The quantity of a single variety of light colors cannot be less than 1,500 boxes, and the quantity of a single variety of dark colors cannot be less than 1,000 boxes.

17. Party A will process 300×300 floor tiles of a single color number for Party B. Within 50 boxes, Party A will be responsible for processing 80 boxes of normal color numbers. Party A will process 100 boxes of 300×450 wall tiles of a single color number. Party A is responsible for the amount within 150 boxes, and the normal color number is for items beyond 150 boxes.

18. Party A is responsible for carefully checking product quality regularly and quantitatively, and controlling product quality at all levels.

Party B can supervise and require product quality correction in a timely manner, and can conduct random inspections or send personnel to assist in inspections. For products that do not meet quality standards, Party A urgently needs to rework or reduce prices in the factory, and Party B has priority for products that have been reduced in price. Party B will coordinate the handling of unqualified products that have entered the market, and Party A will be responsible for the results.

19. Party B provides Party A with the company’s business license, company code certificate, legal representative certificate, tax registration certificate, trademark registration certificate and other relevant valid certificates and procedures (copies). If Party B provides relevant If the information is incorrect, Party B will be solely responsible for any problems that arise and it has nothing to do with Party A.

20. Both parties have the responsibility not to disclose to any third party the professional and commercial secrets of the other party that they know. Party B promises that during Party A's production process, it shall not open the products of other merchants (brands) without Party A's consent, and shall not take away the products (samples) entrusted by Party A to be produced and tested by other merchants. In case of violation, Party A has the right to take the following measures against Party B:

1. First time: Party A gives Party B a verbal warning and delays the production date of the entrusted products by five days.

2. The second time: Party A fined Party B RMB.

3. The third time: Party A has the right to unilaterally terminate the cooperation, and Party B will be responsible for the losses caused.

21. If a dispute arises during the performance of this agreement, the two parties shall resolve it through negotiation. If the negotiation fails, both parties have the right to file a lawsuit with the people's court in the place where the agreement is signed.

22. This agreement shall take effect upon signature and seal of Party A and Party B. For matters not covered in this agreement, both parties may separately negotiate and sign a supplementary agreement with reference to the Contract Law of the People's Republic of China and relevant laws and regulations. The supplementary agreement shall have the same legal effect as this contract.

23. This agreement is made in triplicate. Party A and Party B shall each hold one copy and keep the other copy for record.

Party A (official seal): _____________ Party B (official seal): _________

Legal representative (signature): _____________ Legal representative (signature): _________

_________year____month____day_________year____month____day

3 related articles on simple contract production agreement template:

★ Concise The latest 3 sample contract documents for entrusted production

★ The latest 3 simple contract templates for entrusted processing

★ The latest and simple 3 templates for entrusted processing contracts

★ 3 simple templates for entrusted processing contracts

★ 3 templates for simple entrustment agreements

★ 3 templates for entrusted production agreements The latest 2020

★ 3 simple entrusted processing contract templates