The name of the invention shall briefly and accurately indicate the subject and type of the application for a patent for invention. The name of the invention shall not contain non-technical words such as name, unit name, trademark, code name and model number. Nor shall it contain ambiguous words such as "and others" and "and its analogues"; Nor should we just use general words to avoid giving any invention letters, such as using only words such as "method", "device", "composition" and "compound" as invention names.
Judging from your name, your invention involves a range hood and a cooker, which should belong to two different technical schemes. You need to pay attention to the oneness of technical solutions. If there is a lack of uniformity, it is recommended to apply separately.
Question 2: What is the name of the patent? According to the patent examination guidelines:
The name of the invention shall briefly and accurately indicate the subject and type of the application for a patent for invention. The name of the invention shall not contain non-technical words such as name, unit name, trademark, code name and model number. Nor shall it contain ambiguous words such as "and others" and "and its analogues"; Nor should we only use general words, so that no information about the invention is given. For example, we only use words such as "method", "device", "composition" and "compound" as the name of the invention.
Question 3: How to write the name of the patent application office? The name of the patent department may remain unchanged.
Question 4: Is the name of the patent application as specific as possible? The specific situation needs specific analysis. For example, if it is written as "a spoon", it is obvious that the concept is too broad, which is equivalent to becoming a generic name and cannot express the content of the invention, so it will not be authorized; But if it is written as "steel spoon with curved handle", the scope of protection is too narrow. Once others switch to other materials, such as plastics and composite materials, your patent right will not be infringed. So the name should be limited before it, not too limited. The best way is to express the difference with the existing invention with the least restrictions, and never gild the lily.
Question 5: What is written in the abstract of the patent application? Detailed Rules for the Implementation of People's Republic of China (PRC) Patent Law (revised on 20 10)
Article 23 The abstract of the specification shall indicate the summary of the contents of the patent application for invention or utility model, that is, the name of the invention or utility model and its technical field, and clearly reflect the technical problems to be solved, the main points of the technical scheme to solve the problems and the main uses.
The abstract of the specification can contain the chemical formula that best explains the invention; An application for a patent with drawings shall also provide a drawing that best illustrates the technical characteristics of the invention or utility model. The size and clarity of the attached drawings shall ensure that all the details in the drawings can still be clearly distinguished when the drawings are reduced to 4cm× 6cm. The abstract text shall not exceed 300 words. Commercial advertising language shall not be used in the abstract.
If you have any questions, please call me at any time and answer them wholeheartedly.
I hope you can click the thumb in the lower right corner and give yourself a valuable 1 point. Thank you.
Question 6: What should be the name of the utility model patent? The Patent Law does stipulate that the name of a patent application shall not be advertised, but in actual operation, the examiner will relax the requirements appropriately and follow the examination operation rules.
For the examination of the patent application name, the following aspects are emphatically examined:
1, consistency
The name is consistent with the name in the specification, power of attorney and other supporting documents.
2. Comprehensive
The name shall comprehensively and clearly reflect the theme of the utility model to be protected, and adopt technical terms commonly used in this technical field.
3. Non-technical vocabulary
Names shall not contain non-technical words, including names of people, companies, trademarks, models and codes.
4. Vague words and general words
The name shall not contain ambiguous words, such as "and others" and "and its analogues".
5. Words and punctuation marks
The name shall not exceed 40 words, and the letters, numbers and punctuation marks in the name shall be counted as the number of words, and each letter, number or punctuation mark shall be counted as half a word. A period is not allowed in the name. In addition, punctuation marks such as pause, comma, bracket, quotation mark, book title, slash, backslash, dash and ellipsis are not allowed when the meaning is unclear.
Publicity language generally belongs to the above third aspect, but as long as it is not too out of line and obviously exaggerated, it will not be spared.
For example, a patent application involving an electric globe is entitled "Magic Rotating Earth"; The name of the patent application involving the packaging layer of medicinal materials is "Shen Gong Yuan Qi bag", in which "magic" and "Shen Gong" are obviously exaggerated terms and are not allowed.
Question 7: How did the name of the design patent come from? Just use a common name, but be careful.
The product name generally does not exceed 20 words.
The product name should also avoid the following situations:
(1) contains names of people, places, countries, companies, trademarks, codes, models or products named after historical times;
(2) Inappropriate and abstract names, such as "stationery", "cooker", "musical instrument" and "building supplies";
(3) Names describing technical effects and internal structure such as "fuel-saving engine", "human body heightening insole" and "automobile with new engine";
(4) Product specification, size, proportion and name of quantity unit, such as "2 1 inch TV", "medium bookcase" and "a pair of gloves";
(5) Names named after foreign characters or characters with no clear Chinese meaning, such as Clarice Bottle, but well-known characters with clear meanings, such as DVD player, LED light and USB hub, can be used.
Question 8: What is the name of the patent agency? A patent agency is a service organization established by China National Intellectual Property Administration with the approval of the Provincial Patent Administration. It can accept the entrustment of clients and handle patent applications or other patent affairs in the name of clients within the scope of entrustment. Such as patent agencies, patent service centers, patent departments of enterprises, patent offices, etc. Patent agencies mentioned in the Patent Law refer to China Council for the Promotion of International Trade, Shanghai Patent Office, China Patent Agency Co., Ltd. and other patent agencies designated by the State Council.
The main business of a patent agency is to act as an agent for patent applications and also engage in patent technology transactions. In fact, it is a "business department" for patent technology transactions.
Patent agencies know and are familiar with the patent technology they represent and the patent applicants. They publish patent information in various forms to promote patent technology transactions.
Patent agencies can only enjoy and use one name. The name of a patent agency shall consist of the name of the city where the agency is located, the trademark name, the patent agency, the patent agency co., ltd. or the intellectual property agency or the intellectual property agency co., ltd. Its name shall not be the same as or similar to the name of the patent agency that is in use or has been used nationwide.
Question 9: How to write the information needed for patent application?
If you intend to entrust a patent agency, please prepare the following application materials:
To apply for a patent for invention, you need to provide the following information:
1. Please provide 1, name, address and zip code of the applicant; 2. A copy of the applicant's business license, organization code certificate or personal identity card; 3. Name, address and postal code of the inventor (natural person); 4. The telephone number, fax number and contact address of the contact person who handles the invention patent application.
2. Go through the entrustment formalities (official seal of the unit or signature of natural person).
3. Submit technical disclosure. In order to facilitate you to write the disclosure, and for us to better understand your invention, please write the disclosure in the following format.
I. Name of the invention
(A product, device or method simply and clearly reflects the technical content of the invention (generally limited to 25 words))
Second, the technical field.
(Briefly describe the technical field, such as: the invention belongs to an automatic temperature control device, and the invention relates to a heat treatment method of XXX material, etc. )
Third, the existing technology (background technology)
(Analyze and explain the state of the similar prior art that is closest to the invention, and explain it with the help of the attached drawings when necessary, including the structure, the position and connection relationship or conditions between components, and the technological process, etc. Point out the existing problems in the existing technology realistically and analyze the existing reasons as far as possible).
Fourth, the content of the invention
1. Purpose of the invention (The technical problems to be solved by the present invention are pointed out in a practical way. )
2. The technical scheme (which should be described clearly, completely and accurately, especially the invention points different from the prior art) should be described as clearly as possible, which is not only the basic principle of the invention so that ordinary technicians in the field can implement it, but also the role it plays in the invention when describing various technical means of the technical scheme (including the position and connection relationship of each structure). If it is difficult to describe clearly in words, please use the attached drawings to explain. Alternative technical scheme or alternative technical elements, method steps, etc. The invention of. If so, it should be put forward as far as possible to form subordinate claims. )
Attachment: If there are English abbreviations or codes with special meanings, please indicate their meanings and Chinese names commonly used in the industry.
3. Technical effects (corresponding to the technical problems and technical solutions to be solved by the invention, the effects that can be achieved by the invention (including social, economic and technical effects, preferably with specific data) are described concretely and truly, and scientific analysis and test results are the most convincing evidence. )
V. Attached Drawings and Brief Description of Attached Drawings
(It is necessary to provide necessary drawings (i.e. structural schematic drawings, not engineering drawings) to describe the invention, which can clearly reflect the main points of the invention, so various drawing methods can be adopted. Numbering and naming components or structures in a unified way, and providing drawings related to existing technologies when necessary. )
Sixth, the specific implementation mode.
(enumerate the examples of realizing the invention (the concrete embodiment of the inventive concept), and give concrete examples to illustrate the creative content of the invention, including electrical components and their electrical connection relations. If it is a method, please explain the specific methods of each part, including static relationship, dynamic relationship and action effect. )
Attachment: If there are English abbreviations or codes with special meanings, please indicate their meanings and Chinese names commonly used in the industry.
Information provided when applying for a patent for utility model:
1. Please provide 1, name, address and zip code of the applicant; 2. A copy of the applicant's business license, organization code certificate or personal identity card; 3. Name, address and postal code of the inventor (natural person); 4. The telephone number, fax number and contact address of the contact person who handles the invention patent application.
Second, go through the entrustment procedures (the contract is provided by the agency)
Third, submit the technology to the public, and the agency will examine whether it can apply for a patent. If you can, the agency will send you an entrustment agreement and sign a contract.
Technical disclosure can be divided into the following eight parts:
? The name of the utility model (product)
? The utility model belongs to the technical field.
? Related background art (explaining the defects of the background art)
? The purpose of the utility model or the technical problems to be solved
? The key points of the technical scheme adopted by the utility model are that
? The utility model has the beneficial effects (compared with the background technology)
? Attached Drawings and Description of Attached Drawings (required)
? Specific implementation of the utility model (as detailed as possible)
(Illustration attached to the manual ... >>
Question 10: What should be the name of the patent application? According to the provisions of the Patent Examination Guide:
The name of the invention shall briefly and accurately indicate the subject and type of the application for a patent for invention. The name of the invention shall not contain non-technical words such as name, unit name, trademark, code name and model number. Nor shall it contain ambiguous words such as "and others" and "and its analogues"; Nor should we only use general words, so that no information about the invention is given. For example, we only use words such as "method", "device", "composition" and "compound" as the name of the invention.
Judging from your name, your invention involves a range hood and a cooker, which should belong to two different technical schemes. You need to pay attention to the oneness of technical solutions. If there is a lack of uniformity, it is recommended to apply separately.