Current location - Quotes Website - Team slogan - How to configure udp port number of optical switch
How to configure udp port number of optical switch
ADSL is directly connected to the hub or switch, and all computers enjoy the Internet.

Switch, which means "switch", is a network device used for electric (optical) signal forwarding. It can provide a dedicated electrical signal path for any two network nodes accessing the switch. The most common switch is an Ethernet switch. Other common ones are telephone voice switch and optical fiber switch.

The specific operation mode is as follows:

0/0/0 is a mirror (observation) port.

[Switcha] port monitoring Ethernet 1/0 is a mirror port; 0/. Set the port 1/0/.

[Switcha] port mirroring Ethernet 1/0 is the mirror port; 0/0/ 15

It can also pass through two different ports.

[SwitchA] Port Monitor Ethernet 1/0/ 15

2. The mirror ports are E 1/ kloc-0/5 and E1/,and the port 1/0 ingress Ethernet1/5 is set; 0/0/0/. Set the port115.

2. The input and output of the * * mirror are.

1; 0/, mirroring its input and output * *; 0, respectively using e115 as the observation port of port mirroring. Set e114 to mirror the input and output * *. Suppose the mirror port of the switch is E 1/0? 0/0/ 15

[Switcha] port mirroring Gigabit Ethernet115 and E2/0 exit Ethernet 1/0/.

[SwitchA] port mirroring Gigabit Ethernet 1/ 0 Two Ethernet1/