Configuration-network-advanced configuration-integration protocol, enabling ONVIF or enabling open network video interface. Click Add and select Administrator as the user type.

First open the webpage and log in to Hikon camera, as shown in the figure below, and then go to the next step. Secondly, select enable onivif in the integration protocol, then click Add, as shown in the figure below, and then go to the next step.

Add Haikang camera to Dahua Video Recorder, log in to the camera webpage, click Settings-Security Management-Security Service, uncheck the checkbox to open illegal login, and then click Save.

The method of adding a camera to Hikvision Video Recorder is as follows: Tools: Hikvision Video Recorder, iVMS-4200, local setting 0. The first time you run, you need to create an administrator account and log in to the home page. On the right side of the interface, enter Equipment Management under Maintenance Management.

How to set up the connection between Dahua network hard disk video recorder and Hikvision camera: Click Next to start Dahua video recorder and enter the startup wizard. Enter the user name and password of the video recorder, and then click Login. Enter the general settings to see if the time is not allowed to be modified. Click Save. If the time is normal, you can directly click Next to skip.

Select onvif protocol port 80 when adding to a video recorder. The user name admin password is the password set when Haikang camera is activated. If it is unsuccessful, the LAN computer accesses the camera on the webpage, turns on the illegal login locking function in Configuration-System-Security Management-Security Service, cancels the previous check, and then saves it.