Speech on quality and safety 1
Speaking of this quality, everyone is talking about quality at the moment, and everyone is talking about quality. It is really the slogan of quality "blooming everywhere". Then, I would like to ask all the staff and friends present that the concept of quality has penetrated into our hearts, but is it rooted in our actual work?
People often say that "quality is the foundation of an enterprise" and reputation is the key to establishing an enterprise image. The older generation of autobots have made our company develop today with the entrepreneurial spirit of "tireless and hard-working". However, in response to today's increasingly fierce market competition, as a new generation of autobots, what will we use to carry this banner?
An enterprise is like a machine, consisting of thousands of parts with different functions. The effect of normal operation of the machine depends on whether all parts are normal, whether the assembly is in place and whether the function is exerted. And you, me, are just one of these small parts. What we have to do is to play our part and cooperate with other parts around us.
I remember an entrepreneur in Japan once said, "There is no unsinkable ship, and there is no enterprise that cannot fail. Everything depends on human efforts! " This shows that no matter what the circumstances and conditions, the human factor is the first, people are the main body of the management machine, and people decide the quality, not the machine. The product quality is done by every employee, not tested by the quality inspector. Therefore, it is particularly important to show a strong sense of quality through practical work.
I don't know if you have heard such an arithmetic problem. A product is processed by 100 processes, and the pass rate of each process is 99%. What is the final pass rate of this product? 36.6%! Yes, what an amazing number. It may seem alarmist, but it's true. Looking back, what is the pass rate of our whole vehicle off the assembly line? Compared with the previous figures, this figure seems to be far ahead. However, have you thought about the rest? Isn't it a waste caused by quality problems? I remember two months ago, two light trucks stopped at the assembly workshop because of quality problems. My heart ached when we smashed them because of warning education. If there is a product quality problem, we can correct it again and even reassemble it. However, what will we use to make up for the lost market due to product quality problems?
As we all know, when it comes to German cars, the most popular comment is the word "good"! The reason is four words-"reliable quality"! Any brand and famous brand, if you want to get everyone's favor, the most fundamental thing is to look at the quality. Good, excellent and stable quality is the cornerstone of products. Nice names, overwhelming advertisements, and colorful soap bubbles. The negligence and contempt of any post will affect the overall quality of the enterprise to varying degrees. We are all owners of enterprises, and enterprises provide us with living space. Therefore, enterprises give birth to us, and if we don't work hard, we will cut our own path. In this sense, the fate of enterprises and ourselves is in our own hands. Grasping quality is to contribute to the enterprise, to grasp self and to grasp the future. Every employee should regard his responsibility as Mount Tai, do every working procedure well, strive for perfection, and make quality the life of the enterprise, so that the workpieces we process can be perfect, so that the excellent quality can be worn away in time, and the enterprise can be full of vitality and vitality on the road of sustainable development because of quality.
Therefore, quality is the criterion, quality is loyalty, quality is responsibility, and quality is the life of an enterprise! Without quality and integrity, enterprises will lose their market and viability. So where will nearly a thousand employees go? How will the lives of nearly a thousand families be maintained for the development and prosperity of the enterprise and the stability of our own lives? Please join the total quality management, so that excellent quality and high-quality products will hold up the perfect tomorrow of FAW-GM Hongta!
Speech on Quality and Safety II
Autumn and September are the peak production season for the group company. The launch of Quality Month once again reminds every employee that quality is the life of an enterprise. Without quality, there will be no future for the enterprise. Only when each of us attaches importance to quality can we build a solid quality levee for enterprises and make them more stable.
Enterprises survive by quality. Any enterprise, if it wants to gain a foothold among scattered peers, if it does not pay attention to quality and credibility, the consequences will be unimaginable. Gree lost nearly 654.38 billion yuan in overseas layout due to the recall of dehumidifiers. In 2007, Toyota's "recall door" incident broke out, and analysts predicted that Toyota would recall several cars or more than10 million. Behind the huge number of recalls is the unpredictable economic loss at present, but no matter how big the economic loss is, it can't compare with the reputation loss of an enterprise. As the most advanced automobile company in the world, Toyota will have such quality negligence as "recall door", and the lesson is not painful.
_ _ If the Group wants to survive in the competition and its development will not be delayed, it must let all employees enhance their quality awareness, strengthen production site management and tackle key quality problems, so as to promote the greater development of the enterprise. As the quality manager of the central laboratory, we should achieve the following four combinations:
First, combine the improvement of quality management level with the development strategy of strengthening the foundation of the group, strive to improve their own quality awareness, establish the concept of doing quality products, do their jobs well with a more scientific, rigorous and meticulous work attitude, and contribute to the development of the group.
The second is to combine strengthening learning with improving work efficiency, master the production performance of various materials through learning, strengthen the accumulation of process quality knowledge, attach importance to production practical experience, seriously study the scientific laws behind various quality problems with a scientific and pragmatic attitude, and continuously improve the level of process quality management.
Third, experiments should be closely combined with production practice. The central laboratory must closely combine the actual production situation to study the seamless connection between experiment and production. Only in this way can we provide greater guiding significance for production technology.
Fourth, we should combine strengthening quality management with providing production services. Only strict and meticulous quality management can enterprises implement various quality control measures, which must be resolutely implemented in the implementation of quality management system, and must not be artificial. It is necessary to reflect the rigidity of the quality management system, and at the same time, help the production workshop to carry out quality management with the consciousness of production service, put forward problems related to quality that the workshop is unaware of, and cooperate with the workshop to do a good job in quality management.
The improvement of quality awareness and quality management level is endless and always on the road. Let's work together to create a perfect tomorrow for _ _ Group.
Speech on quality and safety 3
I entered Li Kang last July. Since then, I have pinned my dream on the quality department. As the name implies, the quality department is a department whose first duty is to control and improve quality. So what is quality? The definition of International Organization for Standardization (ISO) is: "Quality is the degree to which intrinsic characteristics meet the requirements". What are the requirements? Zhu Lan, an American quality management expert, once said: "Quality comes from customers' needs", that is, quality should satisfy customers.
In 2008, Sanlu Dairy began a disaster. It took only three months from the announcement of the recall of tainted milk powder in September to the declaration of bankruptcy in February of 15. So, what makes a large enterprise group with a continuous sales volume of 15 and a history of 50 years fall apart instantly? Obviously because of the word "quality"! Quality is the cornerstone of enterprise development and the key to enterprise vitality. Without a solid foundation for quality construction, an enterprise, no matter how powerful it is on the surface, is just water without a source and a tree without a root!
In fact, for modern enterprises, quality and safety have long been unavoidable issues. All kinds of losses and harms caused by quality problems are often seen in the news, and slogans promoting the importance of quality are hung everywhere in our company, reminding us of the importance of quality at all times!
So why do quality problems occur frequently while everyone is aware of the importance of quality? Can we say that the quality problem cannot be changed? I want to say that is not the case!
In fact, since 1924 shewhart put forward the first unqualified rate control chart and 196 1 year Fegenbaum published the first quality management book Total Quality Management, there have been countless methods and books on quality improvement, and our company also has many quality manuals and technical requirements. Therefore, in terms of quality control and improvement methods, however, in actual production, front-line employees only rely on experience to operate, lacking product quality awareness. Moreover, due to the flexibility of experience, the experience of new and old employees is uneven, which can not effectively control the overall quality, leading to many simple problems that are easy to make mistakes, and standard questions appears repeatedly.
Therefore, even though the research methods of human beings in the past hundred years are comprehensive, the actual operation is still human! According to the quality control chart, there are six factors that affect the quality: man-machine material measuring ring (5M 1E), in which "human" is the most active factor. Therefore, to control and prevent quality problems from the root, I think improving the quality of personnel is the first thing we need to deal with! In the work, it is necessary to strengthen the training of employees' quality knowledge, and set up QC team and 5S team in production, so that employees can actively participate in quality work and effectively generate quality awareness. Only when the quality of personnel is improved can we always keep in mind the importance of quality, consciously carry out "self-inspection and mutual inspection" on products, and take the production of good products as our mission, not just the production of products!
As an inspector, I also clearly realize that inspection only plays a role of "prevention and control". To completely control and solve quality problems, it is not possible to accomplish it by one person or one department. At work, many people think that quality is only a matter for the quality department. However, as shewhart, an expert in quality management, said, "Product quality is not detected, but produced". Therefore, all personnel related to production should have a close relationship with product quality. Maintaining and improving product quality should be an activity that all employees participate in. While improving the quality of personnel, we should all participate in quality work and always pay attention to product quality. Only by full participation and everyone's control can we finally produce products that customers are satisfied with!
As we all know, in recent years, escalator safety accidents have occurred frequently, and the topic of escalator quality has attracted more and more attention. As a company specializing in the production of escalators, what reason do we have to ignore the importance of quality?
In the work of the quality control department for more than a year, I not only gained material wealth, but also deepened my infinite pursuit of quality dreams! Although my speech time is limited, our pursuit of quality is infinite. I also firmly believe that as long as each of us has more responsibilities and more care, we can truly become the pride of the elevator industry in China!
Speech on Quality and Safety 4
With the development of society, the competition is becoming more and more fierce. For enterprises, in order to survive, it is necessary to improve quality in terms of quality, packaging, advertising, sales channels and after-sales service. The most basic thing is product quality. This is what "the smell of wine is not afraid of the depth of the alley" said. However, with the development of the Internet, Baidu maps have become more and more detailed, which makes the alley deeper and shows the key to quality.
Products are produced by employees of enterprises. We used to think that improving quality awareness was the key to product quality control. However, with the improvement of production technology, the update of equipment technology, the perfection of metering and batching system and the popularization of automation, the number of post personnel is decreasing day by day. Take the batch class as an example. At the beginning of the establishment of the factory, there were eight people who were responsible for inspection, material allocation and sanitation, and the workload was not small. At present, monitoring has replaced inspection, vibration and pneumatic pumps to reduce material allocation, and the batching post has been reduced to three people. At the same time, they also consider the start and stop of all the equipment on site, and monitor the changes of operating parameters. Quality control is no longer as simple as quality consciousness, but also the embodiment of comprehensive strength of enterprises, so good product quality is not only produced, but also managed.
How to improve the website management level and product quality, I think we need to do the following:
First, the monitoring of important locations.
With the popularization of electronic products and the reduction of the price of monitoring equipment, on-site monitoring can be installed, and parameters such as on-site video, equipment temperature, current and wind pressure can be introduced into the monitoring room to comprehensively monitor the operation scenes of key positions. On-site operation status can be seen at a glance, and any signs of accidents are found at any time, and an operator will handle them promptly and quickly.
Monitoring is more reliable than personnel in many aspects, and it is not necessary to measure the field operation parameters in a time-consuming and laborious way. You don't have to climb up and down in dangerous places; The hot and cold outside no longer affects everyone's mood. In terms of efficiency, a set of on-site monitoring equipment can have 10 experienced inspectors. If it is combined with alarm systems such as material breakage, temperature and current, or further combined with automation equipment, such as infrared material breakage alarm vibration, the workload and tension of field workers will be greatly reduced, production will be more stable and quality will be guaranteed.
Second, organize important issues.
There are many important problems in production, such as receiving, feeding and transporting raw materials. If something goes wrong, the quality of production will be greatly affected. Therefore, we must do it step by step. For example, in the process of receiving goods, it is necessary to determine the variety, confirm the manufacturer, check the quality, determine the unloading place, keep samples and record. These must be done from beginning to end, and no step can be left behind. The job information of a certain post needs to be listed in 1, 2, 3 and 4, so that the degree and time are clear to avoid carelessness. The important work is organized and all parts are in place, which ensures the stable operation of equipment and technology and also ensures high-quality production.
III. Key working procedures
There are many key processes in process production, such as start-stop sequence, procurement, receipt, delivery, sales and inspection. Taking delivery as an example, how to ensure that there are no mistakes in the processes of invoicing, ticket receipt, verification, delivery, sampling, inspection, distribution and weighing? Only in strict accordance with the established process, let the next process audit the last process, can we avoid the accident of sending the wrong variety and quantity. It can be said that every step of the program is very critical, even if the program of "singing" for the driver by the delivery staff seems troublesome, it is very necessary. From the case analysis of some quality accidents, we often find that most of the mistakes are caused by carelessness, and the process can be described as "walking on thin ice".
Fourth, real-time production data.
The parameters of the production process are always changing, so you can't always guarantee the correctness and stability of personnel, equipment and measurement. Chemists are responsible for sampling, testing and reporting test data, and post workers are responsible for patrol inspection, adjustment and stabilization of process conditions. Sometimes, due to inexperience and operational errors, quality fluctuation is inevitable. If the data fluctuates greatly, it is necessary to make a decision and take measures immediately. At this time, call again. It takes a long time to give instructions after careful inquiry and confirmation, and it is not advisable to put the control of continuous production on someone.
The improvement of communication facilities, such as QQ group and WeChat group, can facilitate the exchange and inquiry of data, concentrate the production personnel and related management personnel of the company or group into the production exchange group, gather the wisdom of all people to enjoy information in time, monitor data, issue instructions in time, correct mistakes, and greatly improve the stability of production.
Verb (abbreviation of verb) institutionalized production management
Several elements of management: people, machines, things, law and environment, each of which is very important. How to make everyone do their job, balance all aspects, and always operate efficiently is very important, and any link will become a bottleneck restricting production.
If a job is managed, there will be no management! Without corresponding responsibilities, corresponding assessments and clear responsibilities, work is like a pot of porridge. Management system is born for this purpose. Only by clarifying everyone's work materials, responsibilities, methods, indicators and assessment methods can we achieve efficient goals. Of course, the system must be revised according to the changes of production facilities, personnel and environment, and the unchanging system will inevitably restrict the development of enterprises.
The tide of social development is vast, and the pace of scientific and technological innovation is changing with each passing day. How to produce high-quality products and keep the vitality of enterprise development forever is an eternal topic for every manager.
Speech on quality and safety 5
My hometown is a small mountain village in _ _ _, which is located in a remote place. This road goes all the way to the end here, followed by the steep Fuhe River. Naturally, the road to the town here is always tortuous. After nine years of hard work, one day, I finally succeeded in coming to this city to attend high school. First, I walked five kilometers on a mountain road and got on the bus, and then I climbed mountains and mountains. When people sit in the car, they only see turns and deep valleys, and their hearts begin to tremble, for fear that the driver will accidentally drive the car down the mountain. Every time I get on the bus, I feel weak and I start to have obsessive-compulsive disorder. I am always worried about whether I can get off the bus safely, so I dare not sleep. The feeling of motion sickness makes me feel very uncomfortable, but I have to keep my eyes open and be ready to jump off the bus to escape when an accident happens.
Finally, I had a chance to go to the provincial capital, and the car left Linchuan. The flat and wide asphalt road is endless, so you can't feel any bumps when sitting in the car. Outside the window, the neat poplar trees on the roadside ran back quickly, and the cool wind blew through my hair. Everything is so beautiful! I finally enjoyed the wonderful feeling of sitting in the car. I fell asleep peacefully in the song "That's grandma holding my hand gently with a stick". "Rollover! ..... overturned! " Suddenly a voice woke me up. I opened my eyes and looked out of the window. A truck stopped on the flat asphalt road. Lost all the way. Why? Such a flat road can become like this. If we meet Panshan Road in our mountainous area, how many lives will be lost. The disillusionment of my dreams has also created my obsessive-compulsive disorder of not sleeping by car. Although you can't control the driver when you get on the bus, you should keep your eyes open and be vigilant at any time.
With the growth of age and experience, I am finally no longer confused about the rollover on the flat road. It is not necessarily the most dangerous place, the most dangerous post or the most dangerous industry that causes major safety accidents. I used to work in a famous beer company for 8 years. This enterprise with the vision of becoming a brand with global influence has implemented a "one-vote veto system" on the quality and safety of company management. As long as there is a safety and quality accident, it means that the top leader will be rejected immediately. Therefore, the whole company pays special attention to safety in production. Not only meetings and conferences are repeated, but also various inspection mechanisms, strict safety regulations, company-level full-time safety officers, pre-job safety training and examinations, operating SOPs marked in red letters and precautions are posted next to large and small machines, so as to ensure that people who have not touched this machine can read SOPs and operate the machine well.
However, under such a security strategy, it is still difficult to prevent the occurrence of major security accidents. What I still remember is that in the company's safety bulletin, two casualty accidents in the brother company were caused by the carelessness of the operators and the incredible consequences caused by non-compliance with the operating procedures. Electricians from Chenzhou Company changed the light bulbs in the saccharification workshop together. He didn't wear a seat belt because he wasn't working high above the ground, but according to the regulations, two people are required to work together. He felt that he just found a bench and stood up at will without much effort. I didn't expect the steam in the saccharification workshop to be humid and the lamp holder leaked electricity. His leg fell off and he was found dead a moment later. The other is the bronzing machine accident of Fuzhou Company. Stamping machine is equivalent to the gate of vehicles entering and leaving the community, but its running speed is much slower than that of the vehicle gate. At that time, the operator had to enter the operation area to clean up a case of beer. According to the regulations, he must cut off the power and stop the machine before he can enter. At that time, the operator thought that a box of wine could be straightened in 2-3 seconds at most, which was not dangerous compared with the slow-spitting stamping machine, so he went straight in. Who wants to finish his homework and trip over the wire, then get up and get hit by the oncoming arm and be firmly pressed on the tray, thus ending his 20-year-old life. Afterwards, we specially watched the operation of the bronzing machine. Many people present, including other operators, also said that no one would see it in the peak season when production efficiency is needed (safety performance will not be deducted). They didn't expect this thing to kill people. It's unbelievable ...
What a painful understanding: because of the danger, we have paid attention to it; Because of its importance, various preventive measures have been taken in advance to eliminate various factors that may cause safety accidents. Looking at all kinds of major safety accidents, this paper analyzes the initial causes of the accidents. The reason is mental retardation, ultra-low-level wrong operation, or simply because we are too confident. Before the safety accident happened, just when I thought it was impossible to overturn on a flat road, it happened rudely. In the end, the expression on our faces is either surprise, loss or regret, and the final result will cause irreparable economic losses and even pay the price of life.
The ups and downs of the years, no matter how our life changes, no matter how our work changes, no matter how our technology develops, for me personally, although I moved from an industrial enterprise to another industry, the red line of safe production and safe life remains unchanged. Whether it is spring, summer, autumn and winter, or hot and cold, we all regard safety as the source of happiness. We believe that no pains, no gains, only we have security and attention in our hearts.
For enterprises, safety affects the rise and fall of enterprises, is the patron saint of sustainable experience of enterprises, and escorts employees to live and work in peace and contentment, happiness and safety. There is no trivial matter in safety work, and there is no size of potential safety hazard. "Don't do it with small goodness, and don't do it with small evil." No matter how careful and delicate we are in front of safety, we can't go too far. Security will not be biased towards the future because of the proud past, and confidence in the future cannot guarantee the security of the present. What we need to do is always take every step of the moment. Everyone should do every little thing well, check every hidden danger and build every protective barrier. Only in this way can our steps reach the highest safety peak.
Five articles on quality and safety:
★ Five lectures on quality and safety
★ Five selected safety speeches.
★ Five speeches on safety
★ Five five-minute safety speeches
★ Five lectures on safety in production
★ Excellent safety speech articles and five 400-word model essays.
★ Five safety keynote speeches
★ Establish safety awareness and select five model essays.
★ Five selected safety speeches.
★ Five selected safety speeches.
Tisch
1, safety comes first.
2. Knowledge changes fate, and posts make a career.
3. Promote the Olympic Games and enhance physical fitness. Start with me a