Candidates must hold their ID cards, and according to the appointment date and the number of candidates, the driving school organization or individual will arrive at the appointment examination room 1 hour in advance. Designate the front desk or locker to keep prohibited items such as mobile phones, keys and watches after arrival. Pay the examination management fee, check the individual examination date and file with ID card, and issue the admission ticket label. Candidates lined up to enter the waiting room with admission tickets.

Examination students in the examination room designated waiting area in turn to verify the identity of candidates (brush ID cards), check the admission ticket, and pass the admission security check. After success, they entered the waiting hall of subject 2 according to the instructions of the staff.

After the candidates enter the waiting hall, they will verify their fingerprints (usually they will press them three times with their right index finger and thumb), brush their faces and wait patiently after receiving the sign-in number.

Pay attention to the discipline in the examination room, don't make noise and walk around at will. If you need to leave temporarily during the exam, you need to apply to the staff for registration.

When waiting, the first thing to pay attention to is to check whether the candidate's name, ID number, car number, test area and other information displayed on the electronic display screen in the waiting room are my own.

The second is that the sign-in number is the certificate of entrance examination. When taking the exam, please pay attention to whether the calling number in the hall is me, and the voice prompt of the calling number is "Please take the exam from * * * to * *"; The examination room only calls the number, not the name.

While waiting for the exam, the staff will verify the metal detector and the electronic equipment detector. After a simple examination, the examiner will go down the stairs, take the green passage of the candidates and arrive at the waiting area of the examination room. Remember the car number of the test, and find your own car for the test according to the displayed car number and area. If someone is taking an exam in the car, please wait patiently in the examination room to familiarize yourself with the examination process and the examination room environment and calm down your nervousness. If there is no one, just get on the bus after being informed by the examiner (the examiner will briefly explain the examination process and precautions before getting on the bus, and all students must listen carefully).

Second, get on the bus:

If there is no limit on the starting time after getting on the bus, close the door first and pay attention to whether the door light is turned off. If you can't close the door, you will fail.

Adjust the position of the seat, and the comfortable sitting position can be operated better; Step on the clutch with your left foot, hold the steering wheel with your right hand and adjust the seat with your left hand. Adjust your left foot to bend it slightly, and you should also pay attention to moving it back and forth to see if the seat is clamped. Adjust the backrest to the normal practice position, and pay attention to whether it is stable before and after. Then put your hand on your head and measure whether the height is the same as usual. If it is too low, be sure to put the seat cushion and adjust it.

Then adjust the left and right rearview mirrors to appropriate positions, so that you can see the corners of the ground clearly when reversing, and the position of the rearview mirror can be adjusted as usual without being too entangled; When finished, the most important step is to fasten your seat belt. Many students just forgot to fasten their seat belts during the exam and failed the exam. This is so wrong.

When everything is ready, verify fingerprints and test information. After the verification is successful, the examiner clicks the "Start Test" touch button (on the front display screen of the co-pilot). Then he heard the voice, "Start the exam, please start", and then took the exam in the car according to the voice prompt.

Remember the order of the exam items clearly. You should know that there are many items in subject 2, which should be completed step by step in order.

Look at the reference points of each test item, don't look blindly, anyway, you must operate in order, so that you won't easily fail the test.

Control the speed, don't rush the exam, rather drive slowly than quickly.

Third, start the exam:

Step on the clutch first, shift to 1, turn on the left turn signal, press the horn once, release the handbrake, and then slowly release the clutch, and the car will slowly move forward.

Generally speaking, the examination is conducted in the order of reversing into the warehouse-transverse parking-ramp fixed parking and starting-curve driving-right-angle turning.

At the beginning of each activity, the front of the car enters the sensing area, and there will be voice prompts in the car. For example, when the voice of "please go back to the warehouse" in the car rings, it means the official exam begins. When the car body arrives at the examination area, the speaker in the car will remind "the entrance examination begins", and it is required not to stop halfway during the examination.

1. Back to the warehouse:

After reversing the right garage into the left garage, you should enter the next exam from the right through the right guidance line. When the car comes out of the right induction line, you can hear the voice broadcast "This project has been completed". Don't press corners and lines (starting from the starting point) and don't press other parking spaces. You should enter the next exam through the back door.

During the exam, if one step is not in place, points will be deducted and there will be a voice prompt. If it is qualified, there will be no sound and the next project will be directly carried out.

Precautions for reversing into the warehouse:

(1) When the car drives to the starting position, the off-line distance of the car body shall be kept below the front white line on the right side of the garage, but shall not exceed.

(2) Pay attention to the line point and kill the direction when reversing. How to practice at ordinary times, or how to take the exam. Look at the library in the rearview mirror.

(3) After the car enters the garage, it must go straight back and don't turn left and right.

(4) Be careful not to pour too much after warehousing, and stop when warehousing.

(5) Pay attention when leaving the warehouse on the left, look at the distance between the left car body and the warehouse line, and adjust the steering wheel appropriately.

(6) Left sinotrans must reach the designated location.

(7) No parking, car running, gear shifting, flameout or shadow line during the whole process. (Some can't cross the line)

2. Turn at right angles:

When the front of the car approaches the guide arrow, broadcast "You have entered the right-angle turning test project" and report "Project completed" when the car turns out. When entering the right-angle turning area, the vehicle speed should be slow, and the right front wheel should be aimed at the triangle of the guide arrow of the ground road sign and pressed over to drive. And the left corner of the front of the car is next to the left line, or the gap of the front cover presses the left line to move forward slowly. (Looking at the front of the car) Turn your head to the right after adjusting the direction.

Matters needing attention in right-angle turning:

(1) When moving forward, it is necessary to adjust the distance between the car body and the right edge line.

(2) When the car reaches the corner, the steering wheel is killed at speed.

(3) After death, you can show it to him to see if the left rear wheel of your car can be bent. If you can, you can turn the steering wheel properly.

(4) It is not allowed to stop, slide, shift gears, turn off the fire or press the line during the whole process.

3. Stop and start at a fixed point on the ramp:

For example, after taking a right-angle turn to complete the exam, you can enter the ramp and stop at a fixed point. You can press the semi-clutch slowly uphill, adjust the direction in advance, stabilize the front of the car, and turn on the left turn signal immediately after stopping at a fixed point. Start going uphill in 30 seconds. If you pass the specified parking performance on an uphill slope, you will hear a "clang". Don't turn off the engine when you start, don't sneak back and don't rush forward.

After stopping on the ramp and starting, there will be a voice prompt in the car. If it is qualified, it will prompt "The exam is qualified, please print the results at the test center". If you fail, it is "failed in the exam."

Matters needing attention in fixed-point parking and starting:

(1) Go uphill and turn right. Don't drive too fast. Generally, the right wheel of a car is 30 cm away from the edge line. Control this distance.

(2) When you reach the designated position, the speed will be slower, so that you can find the punctuality more accurately.

(3) Turn left and honk the horn before starting to find the semi-linkage. Generally do not fill the valve.

(4) No parking (except fixed points), car sliding, gear shifting, flameout and line pressing are allowed in the whole process.

4. Side parking:

When you hear the sound: you have entered the side parking, stop immediately, put in reverse gear and complete the side parking. After parking in place, there will be a "clank" sound. When moving the car, pay attention to stop when the right, right and right corner is exposed, and the front line cannot be pressed. When the left rear wheel approaches (or presses down) the green paint edge line by about10cm, hit all directions to the left. Put in first gear after parking! Press out the wire buckle by ten points!

Precautions for side parking:

(1) When driving to the examination position, the car body cannot exceed the white line, that is, the car body cannot press the white line.

(2) To adjust the distance between the car body and the garage edge, the distance between the car body and the garage should not be too close to the garage, at least the rear wheel of the car should exceed the garage edge line.

(3) Keep an eye on the line when you hit the direction.

(4) After entering the garage, turn left and honk the horn. When leaving the garage, you can't press a corner of the garage.

(5) It is not allowed to stop, slide, shift gears, stall or shadow lines during the whole process. (Some can't cross the line)

5. Driving in corners:

When you hear the computer voice broadcast: you have entered the corner. At this time, enter the entrance to the right corner of the curve, ensure that it is 30 to 50 cm away from the left corner or drive slowly and uniformly from the middle, and at the same time make a 90-degree circle to the right. When driving to the middle of the curve, the left circle will be leveled, then make a 90-degree circle to the left while driving at a constant speed in the left curve, and then make a 90-degree circle to the right.

After the curve is completed, the computer will broadcast "project completed" by voice, and park the car in the waiting area to wait for the voice broadcast "the test results are qualified and the results are being uploaded". You can't get off until you pass the exam. Don't loosen your seat belt in a hurry.

Precautions for driving in corners:

(1) The car should make a big turn after entering the corner.

(2) the speed should be controlled slowly, and it is best to move at a constant speed. Every corner should be targeted, the direction should be fast, and the return should be fast.

(3) It is not allowed to stop, slide, shift gears, turn off the fire or press the line during the whole process.

Precautions:

1. Comfortable to wear. Bian Xiao suggested that candidates wear shoes when practicing driving, so it is easier to find the feeling.

2. When getting on the bus, you must adjust your seat and fasten your seat belt to verify your fingerprints.

3. Every examination item in the examination room is detected by GPS positioning, and the control line (yellow dotted line) of each item represents the examination area of the item. As long as the front of the vehicle crosses the control line, it means that it has entered the examination of this project and must be completed in accordance with the examination rules of this project;

4. Before entering the next test item, confirm whether there is a vehicle in front of the test. If there is a vehicle in front of the test item, you must stop and wait in front of the yellow line of the test item, and you are not allowed to enter.

There are two opportunities in the exam, and each opportunity must have five qualifications. If one project fails, all five projects must be restarted.

6. If you fail the first chance exam, take the second exam. Where did the examination process hang up? The next project started again.

7. After the exam, candidates must leave the field quickly and must not interfere or direct others to take the exam. They should leave the examination room through the exit, and then sign the report card with the sign-in number in the report card printing window and print it.

Don't ask about the test results. Everyone has different skills and mentality. Don't talk about the quality of the test. Only by maintaining a good attitude and a good mood and relaxing can we play our own level. In advance, I wish all students a one-time pass in driving test subject 2.