1. Safety inspection work report
In view of the upcoming National Day holiday, in order to effectively prevent and contain all kinds of production safety accidents, do a good job in production safety during the holiday and ensure the stability of the company's production safety situation during the two festivals, the company carried out a comprehensive production safety inspection throughout the company on September 28, and now the inspection results are notified as follows: 1. Inspection objectives.
In order to further strengthen employees' awareness of safety in production, realize the safety production management policy of "safety first, prevention first, comprehensive treatment", strengthen the safety production environment, find a hidden danger, rectify a hidden danger, and completely put an end to safety accidents.
Second, check the situation.
The company's safety officer, the safety section chief and the safety officers of all departments went to the site to conduct a comprehensive inspection of nine projects, including the investigation of potential safety hazards, the use of labor insurance supplies for operators, factories, equipment and facilities, and now the problems detected are reported as follows:
Third, there is something wrong with * * *
1. The routine safety inspection of all departments was not done (only the management department did the inspection from June to September). Note 6/26 The e-mail sent to the heads of various departments contains the regular safety checklist related to each department;
2. There is a lot of garbage and dust in the electric boxes and control cabinets within the jurisdiction of various departments;
3. There are bad safety emergency indicators within the jurisdiction of each department. Please check all departments and repair the broken ones.
4. On-site rotating equipment has no protective cover and no rotating sign;
5. The on-site pressure gauge can only see the pressure, but can't know the normal pressure range value of the equipment. It is recommended to identify normal range values;
6. Some equipment is seriously corroded, oil-free, dusty and poorly maintained;
7. Each pipe is not marked with what kind of material and flow direction.
Fourth, the specific problems existing in various departments
Management department:
1. The restaurant and cleaning staff have no safety training records;
2. The electric cabinet door of the small restaurant is blocked by the locker;
3. The fire hydrant on the stairs on the fourth floor is used to block the door;
There is water leakage in the north of the first floor of the office.
Materials department:
1, crusher low voltage and lighting cabinet door handle is broken;
2. The lighting in the stairs from the first floor of the crusher to the main control room is poor, and there is no skirting board on the platform, so people can't have a good view up and down, which is easy to collide;
3. There are dead rats in the control box of the screening machine in the C reservoir area, so check for plugging holes.
Engineering department:
1. There is no cover plate above the reservoir of the air-conditioned boiler room in the dormitory;
2. There is a power cord * exposed in No.2 cabinet of air compressor room;
3. Incorrect entry/exit and sanitation forms posted at the entrance of the power distribution room (latest date is 15 1 month);
Production department:
1. It was found many times that there was no anti-slip buckle on the hook during driving. It is recommended to check all of them, and check one, but it cannot effectively guarantee the safety of all maintenance;
2. The cooling water valve of the take-up machine of K furnace is seriously corroded;
3. Waste oil is placed in the high temperature area next to the oil receiver of K furnace;
4. The power cord of the take-up machine of K furnace and the protective sleeve of the cooling water pump of the cold ash hopper are damaged;
5. The cover above the cooling pool of the cold ash hopper is not covered properly;
The top of the main motor of 6.2# cold ash hopper leaks water, which directly corrodes the motor shell, damages the chain cover of the main motor of 1# cold ash hopper, and causes serious chain corrosion;
7. 1# The handle of the control cabinet of the cold ash hopper electric box is broken.
Please ask the heads of all departments to be responsible for the rectification of the above-mentioned * * * problems and specific problems on site, and reply to the safety officer in the general manager's office within the rectification period, and confirm the completion when it expires.
2. Safety inspection work report.
In order to further promote the in-depth investigation and management activities of hidden dangers in production safety, and effectively strengthen the safety and civilized supervision management of construction projects in our project department, according to the requirements of the Notice on Printing and Distributing the Implementation Plan of AVIC Safety Inspection (Zi Zi [20xx] No.70) and the Notice on Printing and Distributing the Implementation Plan of AVIC Asset Management Office Safety Inspection (Zi Xin [20xx] No.2), combined with the current situation of safety production management supervision in our project department, On September 15, 20xx, AVIC Guizhou Asset Management Co., Ltd. and Guizhou Aviation Engineering Construction Supervision Co., Ltd. went deep into the site of Anshun Ma Yun Supervision Department to conduct a major inspection of the safety production management at the supervision site. First, check the situation.
This inspection focuses on the information involved in the AVIC Safety Inspection Implementation Plan Notice issued by the supervision unit in the early stage, and checks the implementation of the safety responsibility system, safety education, safety technical disclosure and hidden dangers rectification. Judging from the inspection, the safety production work of Ma Yun Supervision Department meets the requirements. Before the inspection, self-examination and self-correction were carried out on the spot, and some safety hazards and civilized construction problems were rectified in time.
Second, the main problems existing in the inspection
(A) the basic management of production safety
Check whether the safety education and training, certificates, safety funds, hidden dangers investigation and safety protection measures of full-time safety production management personnel are implemented as required. Construction facilities and equipment, such as material lifts, construction lifts, hanging cages, scaffolding, etc. Inspect the construction site as required, eliminate potential safety hazards, and take protective measures for the edge of foundation pit that meets the requirements. Individual workers who do not wear safety helmets, hang safety ropes and operate illegally have been stopped and rectified.
(2) Safety management of hazardous chemicals
The storage, use and abandonment of chemical inflammable and explosive articles on site meet the relevant requirements of safety production, and the working procedures are clear and reasonable.
(3) Fire safety management
According to the notification requirements, the fire control work was mainly investigated and rectified; The fire prevention and living quarters on the construction site, warehouses for processing and storing hazardous chemicals, and staff dormitories shall establish a fire prevention management system as required, and be equipped with sufficient fire prevention facilities and fire-fighting equipment. All kinds of fire-fighting equipment shall be kept in good condition and emergency facilities shall be effective.
(4) Safety management of electrical operation
The power transformation and distribution operation on the construction site meets the relevant requirements of the electric power safety regulations; Electrical wiring, power distribution cabinets and other facilities meet the specification requirements; The temporary electricity consumption for on-site construction meets the safety requirements, and the hidden dangers of individual temporary electricity lines that are chaotic and prone to fire and casualties have been urged to be rectified and qualified; On-site construction insulation tools and supplies are complete and effective.
According to this safety inspection, the safety production work of Ma Yun's supervision department basically meets the requirements, and there are still weak links and outstanding problems in safety production management. In view of the existing problems, the inspection team asked the regulatory authorities to attach great importance to early deployment, early arrangement and early implementation. The person in charge of the unit should carefully organize and deploy, plug loopholes, check dead corners, and take various safety precautions to ensure that the construction site environment meets the standards, eliminate potential safety hazards, and make immediate rectification.
Rectify immediately. If it cannot be rectified immediately, it is required to rectify within a time limit, and the construction site with serious safety hazards shall be ordered to stop construction. The inspection team also asked all units to enhance their awareness of safety production management, give full play to the management role of the supervision department, strengthen the responsibility system for safety production, and earnestly strengthen management to ensure the stable development of safety production and civilized construction of the project.
3. Safety inspection work report.
With the support and concern of Xicheng Development Zone and various units, our company has put forward higher-grade and all-round further requirements for the company's safety production. The national security system has been fully implemented and some achievements have been made. Now it has passed the acceptance of relevant units and won favorable comments. The safety production management of our company mainly includes the following points:
First, improve the concept of safety and do a good job in publicity and education.
1. The company legal person is the first person responsible for safety. Every Friday afternoon, organize managers of all departments to hold a regular meeting on safety production, summarize the safety work in the workshop for one week, put forward the key points and requirements of safety production work for next week, and make arrangements and deployments.
2. Pay attention to the key points, leadership, management and problems, study and discuss with the emphasis on learning and conveying the relevant safety production documents of superiors, and ask the leaders of all departments to further improve and strengthen the safety production management, instill safety awareness into the minds of every employee, improve the safety awareness and concept of employees, put an end to the "three violations" behavior, and do a good job in safety work smoothly.
3. Conduct publicity and education at the production site. Under the guidance of the leading organization of production safety, the comprehensive office of the company organizes publicity and education work. The safety team of the company holds regular meetings of all managers to convey and implement the spirit of all documents, rules and regulations and safety operation procedures related to safety production, and arrange and post slogans and signs related to safety production at the production site to further improve the safety awareness of employees, so as to achieve the effect and purpose that publicity and education work should be horizontal and vertical and everyone should know.
Second, attach importance to safety management institutions, strengthen safety management, and conduct regular inspections to ensure safety.
1, the company set up a safety production leading group, issued safety production documents, so that there are rules to follow, responsibilities are in place, and management is networked. Ensure the normal work of safety institutions and ensure safe production. The production department has also set up a safety leading group, with the production minister as the leader, the workshop director as the deputy leader, and the safety officer, team leader and all employees participating. After division of labor, division of labor and segmentation, responsibility management will be carried out, and the "one-vote veto system" will be implemented in management, so that responsibility will be assigned to people and management will be assigned to people.
2. In addition to their daily work, the safety team of the company should also inspect the workshop regularly or irregularly, and rectify the departments and workshops that do not meet the requirements within a time limit, and conduct assessment and notification.
Third, do a good job in training and show certificates.
Carry out the leading concepts of "people-oriented", "prevention first, safety first and comprehensive management", strengthen and strengthen the safety ideological education and on-the-job training of all employees, and the company's safety management personnel also regularly receive safety training and education in relevant municipal units, so as to improve the safety management personnel's understanding of safety work and work quality level, especially the training of workers with special types of work, so as to work without a license and retrain at the expiration of the period, eliminate illegal acts of working without a license and ensure safe production.
It is very important to carry out "three-level education" for new employees The training and education work shall be attended by the comprehensive office, and the safety questionnaire examination shall be done well, and only qualified employees can take up their posts.
Four, create a civilized production site, improve the production conditions of workers.
1, the production site should be clean and tidy, the windows should be bright and clean, the machines should be clean, no fighting and no smoking, the canteen cost should be accounted, and free buffet should be provided to each employee.
2. Issue labor protection articles (work clothes, labor insurance shoes, gloves, glasses, etc.). ) Conduct regular training for employees to ensure that employees can achieve "three no injuries" in production and protect themselves.
There have been no major casualties in our company in recent years, which is inseparable from the guidance of the municipal labor bureau, the district security office and the leaders of the development zone. Safety in production is related to the safety of life and property of enterprises and people, and the state has specially determined the purpose of "safety first, prevention first and comprehensive management". Although the purpose of business activities of enterprises is for economic benefits, safety work must not be neglected for the sake of benefits.
The leaders of our company have always attached great importance to safety production and safety management, and put organizational construction, system establishment, production environment and economic expenditure in the first place. As a member of the company's safety production leading group, we will further adjust and strengthen the safety production management to a new level.
Thank you leaders. Please criticize and point out the shortcomings of the above safety work, and put forward valuable opinions on the safety production work of our company.
4. Safety inspection work report
In 20xx, under the leadership of the county health bureau, the town party committee and the town government, our hospital has always adhered to the safety production policy of "safety first, prevention first", and started with raising awareness, strengthening leadership, perfecting system and strengthening management, carried out in-depth safety inspection and actively eliminated hidden dangers of accidents. Through the concerted efforts of Qi Xin, the staff of the whole hospital, the safety responsibility target issued by the county bureau was successfully completed, and no accident occurred. The summary is as follows: 1. Raise awareness, strengthen leadership, and implement the responsibility system for production safety at all levels.
Safety responsibility is more important than Mount Tai. Safety in production and maintenance of workers' lives and national property safety; It is related to the economic rise and fall of our hospital. Our hospital has always attached great importance to safety work, and has always listed it as the "number one" project and put it on the important agenda. The main leaders personally grasp, in charge of the leadership of the specific grasp, each position, each major together, forming a * * * management situation. Starting with strengthening study and raising awareness, comprehensively improve employees' awareness of the importance of safety production; Timely convey the spirit of the county bureau's instructions on safe production, and often educate everyone with this system's safety accident cases, especially learning the "Safety Production Law" and related laws and regulations. Through the study, the staff of the whole hospital realized that safety in production is an important and meticulous work, and accidents may occur with a little carelessness, thus further strengthening the self-protection ability of the staff.
Strengthening leadership and improving organization are the basis of safety production management. We have adjusted the safety production leading group with the president as the team leader, the leaders in charge as the deputy team leader, and the heads of safety departments and related departments as members, and set up full-time (part-time) safety officers to form a horizontal and vertical safety production management system, so that safety management can not be separated from the organization.
In order to further implement the responsibility system for safety in production, the dean and the heads of various departments signed the responsibility book for safety in production, which made the responsibility clear and the responsibility to the people, and achieved good results.
Second, formulate safety rules and regulations to standardize and standardize safety work.
As the saying goes, "Without rules, there would be no Fiona Fang". In order to ensure the safe production in our hospital, since the end of last year, our hospital has formulated a series of rules and regulations according to the relevant regulations of the county bureau and the actual characteristics of our hospital's safety work. It ensures that the safety work in our hospital has rules to follow, so that all employees can work in an orderly way and behave in a standardized way.
In order to ensure the implementation of various safety production rules and regulations, the relevant departments and responsible persons of the hospital insist on regular inspections, and investigate the violations found in each safety production inspection according to the relevant provisions of safety production rules and regulations. Using the system to manage people not only educates everyone, but also effectively promotes employees' consciousness of obeying rules and disciplines, ensuring the daily safety production in our hospital.
Third, strengthen publicity and training to enhance safety awareness.
Improving the safety quality of employees in our hospital is the basis of doing a good job in safety production in our hospital. Since the beginning of this year, our hospital has made full use of regular meetings on work safety, publicity columns, safety knowledge contests and other forms to educate employees on safety, organized employees to study the People's Republic of China (PRC) Safety Law, the Work Safety Law and related laws and regulations, learned relevant work safety regulations and rules and regulations of our hospital, and organized employees to take the work safety awareness test. Only after passing the examination can you be familiar with the safety requirements of this position and improve your safety operation skills.
Four, strengthen supervision and inspection, pay attention to the rectification of hidden dangers.
As the saying goes, "sharpening a knife doesn't mistake a woodcutter", we would rather spend more time checking safety and eliminating hidden dangers than working illegally. In our daily work, everyone feels the necessity and importance of safety inspection. It is absolutely unacceptable to be careless, lucky, make-do and perfunctory. The problem can only be found through inspection. Before and after going to work every day, the head of the department and the general duty of the hospital insist on conducting safety inspections on the site. At the same time, our hospital also took the initiative to accept the inspection by the safety supervision and management department. No matter the hidden dangers of internal investigation or external investigation, they should be rectified in accordance with the principle of "three determinations" and strive to create a good safety production environment.
In a word, although we have made some achievements in safety production this year, there is still a certain gap with the requirements of county bureaus, town party committees and town governments. We will conscientiously sum up our experience, make our hospital's safety work to a new level in the new year, and make contributions to the creation of a harmonious hospital.
5. Safety inspection work report.
In order to do a good job in transportation safety management, safety inspection, hidden danger investigation and hidden danger management should be strengthened. In order to effectively prevent all kinds of accidents, according to the spirit and work requirements of the Emergency Notice of the General Office of the Municipal People's Government on Centralized Inspection of Work Safety and the Emergency Notice of the General Office of the County People's Government on Centralized Inspection of Work Safety forwarded by the Municipal Transportation Bureau, the centralized inspection of work safety in our bureau is now reported as follows: 1. Leaders attach importance to it and fully implement it.
Combined with the spirit of the meeting held by the Safety Committee in the hotel on June 26th, our bureau attached great importance to it, formulated the implementation plan of centralized transportation safety inspection in time, and set up a leading group for transportation safety inspection, with the director as the leader and the relevant deputy director as the deputy leader, and the members were composed of relevant units, and the deputy director was specifically responsible for the safety inspection. On July 9th, our bureau held a work conference on safety in production of traffic system in time, which conveyed the spirit of the work conference of safety in production of county safety committee. At the same time, the "Implementation Plan for Centralized Inspection of Safety in Production of Transportation System" was issued, and the task of centralized inspection of safety in production was assigned, requiring all relevant departments to act immediately, seriously carry out self-examination and self-correction, investigate potential safety hazards, pay close attention to implementation, and do a good job in safety publicity in combination with the work of "cracking down on illegal publications".
The second is to act quickly and focus on safety inspections in key areas.
On July 10, the Transportation Bureau took the lead in carrying out joint law enforcement inspection of road traffic safety in conjunction with the county transportation management branch and the traffic police brigade. This joint law enforcement inspection is mainly aimed at the road traffic safety of four passenger transport enterprises. The inspection contents mainly include:
1, implement the spirit of the safety production meeting;
2, safety meeting records;
3, whether to carry out safety inspection and record;
4, production safety related system;
5. Investigate hidden dangers, etc.
During the inspection, we found that there are still many outstanding problems, mainly including:
1. The practice of "three non-stop, six non-stop" at the company's township line station exists in name only.
2. Most bus drivers of Bus Company Limited do not have road passenger transport qualification certificate to operate.
In view of the security risks of the two companies, the joint law enforcement inspection team put forward a rectification plan for the company in time, and the rectification was in place within a time limit, leaving no future troubles.
The third is to implement responsibilities and ensure that hidden dangers are rectified in place.
Our bureau passed the safety inspection, tracked the hidden dangers in time, and re-examined and rectified the hidden dangers of the two companies.
1. The company has put the rectification in place, arranged special personnel to be on duty in the township station box, and made a good job of vehicle registration and inspection in and out of the station.
2. In view of the problem that most bus drivers in public transport co., Ltd. have no qualification certificates, the county transportation management branch communicated with the municipal bureau and organized 10 drivers without qualification certificates to conduct training examinations. Five of them have passed the exam, and the other five can only be employed after passing the exam again this Friday.
3. The ferry has been in disrepair for a long time, and the hull is seriously corroded, which has potential safety hazards. The bureau has invested10.5 million yuan to repair and maintain the ferry, and equipped with life-saving and fire-fighting equipment to eliminate potential safety hazards in time. At present, the ferry has been put into operation.
4. In the next step, we will continue to strengthen transportation safety inspection, effectively investigate hidden dangers, leave no dead ends, rectify future troubles, establish and improve various safety rules and regulations, and ensure the safety and stability of transportation in our county.