The server hangs up. How to solve the problem of ftp remote host closing connection?
We have to reconnect.
If the other server still doesn't respond, please try again at another time. Can't Ftp connect?
FTP can't connect normally. The reasons can be found in the following four aspects:
1.PINGFTP server address, whether it is possible to connect;
2. Check whether the FTP server can be accessed normally locally;
3. Check whether the FTP service has been started;
4. Check the firewall settings to see if there are any blocked ports 2 1. The general configuration scheme of ftp on the server is as follows: 1. Find it on the server in turn: Start-Administrative Tools-Computer Management-Local Users and Groups-Users-(right-click) Add a new user, set the user name and password (the password will never expire), and then click Create. You need to fill in the following three positions: 2. After creating local users and users in groups, go to the configured IIS manager, find the corresponding site and add ftp publishing. After clicking Add ftp to publish, the first step is to pay attention to the port indicated by the arrow below, which must be the port added on the firewall above. The next step is to pay attention to these points. All authentications and permissions should be checked. You need to select a designated user in the middle of the authorization location-then fill in the newly created "new user" name above, and click ftp on the server to complete the configuration. 4. If you still can't connect to ftp after the above steps, you should install the "server security dog" software on the server, then find the "network firewall" 5 of the software, then find "port protection" 6, then add the ftp port configured above here, and then select "policy" as "accept all IP". 7. If you still can't connect to ftp, you can only give up configuring ftp on this server like this. The configuration method is as follows: To install the modified software, you need to click "Start ftpserver", then click "ftpserver Manager" 8, then click "Head" 9 indicated by the arrow in the figure below, and then click "Add" to set the ftp user name and password 10, and then click "* * * to find the corresponding station.
The FTP address can be Ping, but FTP can't connect?
TCP port 20 or 2 1 of your computer or FTP server may be disabled, which may cause the port of your computer to be disabled. There may be a BUG in the antivirus software, or it may be infected with a virus. If the port of the server is disabled, it may be because the server has been attacked or the administrator has configured it incorrectly.
What is the solution to the connection error of FTP account?
This is because the customer filled in the wrong Ftp server when uploading Ftp, which led to this problem. Remember to use our Ftp server when uploading Ftp. 530 error, Ftp user login failed, the error message is as follows: 2.426 error, file upload failed, the error message is as follows: 3.452 error, file upload failed, the error message is as follows: The above summarizes the common errors in FTP upload, and you can solve the problems encountered when uploading websites to space according to the errors.
Ftp could not establish a connection with the server. Solution?
Solution:
1. Check that the user name and password are entered correctly. Otherwise, you will not be able to establish a connection with the server.
2. Check whether the ftp address is entered correctly. If the address is incorrect, the connection cannot be established.
3. Check whether the port number is correct. If the port number is wrong, you can't connect to the server.
4. Check whether the file protocol is consistent with the server. If not, the server cannot connect.
5, check whether the network is normal, through the ping command detection, if there is no network, you can't connect to the server.