Speech on chemical safety responsibility 1
Guided by the safety production management policy of "enhancing safety awareness, strengthening safety education, vigorously implementing various safety systems, strengthening various safety inspections, eliminating various potential safety hazards, and ensuring safe production", we will pay attention to safety education step by step from the safety officers of all departments, focusing on typical accidents such as sodium hypochlorite decomposition and high-pressure post fires in the past, do a good job in safety inspection, and focus on controlling and eliminating various potential safety hazards to ensure safe production. I carried out the plan carefully. Through the practical implementation of the company's safety production management policy, the practical work of all employees in the safety department and the active cooperation and efforts of leaders and employees in various workshops and departments, the accident rate decreased significantly compared with the same period of last year, and the safety production goal in the first half of the year was achieved. The work in the first half of this year is summarized as follows:
First, strengthen safety education in various forms to enhance employees' safety awareness.
1. Every Thursday afternoon, safety officers in all workshops and sections concentrate on safety training, study and discussion, learn safety technology and safety management knowledge, distribute study materials, timely convey and implement the spirit and requirements of superior documents, analyze and discuss various recent accidents at home and abroad, draw inferences from one example, find problems and formulate preventive measures in combination with the company's actual situation, and improve the comprehensive quality and safety management ability of safety officers. The safety personnel of all departments are required to implement the contents and spirit of the meeting to all employees in the workshop in time. In addition, according to the seasonal characteristics, combined with the actual production situation of the company and the problems existing last week, the matters needing attention for next week were comprehensively analyzed and deployed, and the problems were found and solved in time, giving full play to the role of the safety management network.
2. Last year, according to the specific production situation of the company, a comprehensive and practical safety knowledge compilation including various safety systems and safety knowledge was compiled and distributed to every employee. Some new contents have been added this year and distributed to new employees last year. Through various forms of organizational learning, safety knowledge has been popularized and employees' awareness of self-protection has been improved. I also take advantage of daily inspection and duty to discuss with employees in depth, grasp the safety psychology of employees in time, and carry out safety education at any time in combination with the actual situation, which has received good educational results.
3. Carry out accident warning education.
(1), organize all employees to watch the CD-ROM of safety warning education against three violations. Using the form of case reappearance, through the vivid reappearance of typical real cases of enterprises, let the cadres and workers realize that violation of regulations means going to an accident, approaching injury or even ruining their lives. Make the broad masses of cadres and workers truly understand safety from the depths of their minds, attach importance to safety, and always think about safety.
(2), organize all employees to carry out safety accident warning board education. Combined with some accident cases in the company in recent years, some typical cases of habitual violation were collected from the outside, a set of safety accident warning display boards were made in the form of graphic combination, and some safety education wall charts were also made. Various workshops and sections also participated in the production of some exhibition boards according to this model. Through colorful content and vivid reappearance of real cases, the safety awareness and safety concept of employees have been enhanced, which has won unanimous praise from cadres and employees and improved their safety quality.
4. Conduct factory-level safety training and education for key employees and new employees of the company. I rewrote a company-level safety training textbook, mainly including relevant laws and regulations; Basic knowledge of safety production and occupational health; Safety production rules and regulations and labor discipline of the unit; Workplace risks, accident prevention measures and emergency measures; Related accident cases, etc. Through the careful education of new employees, they have a preliminary understanding of the company's safety production and obtained the necessary basic safety skills and self-protection knowledge before taking up their posts.
5. Strengthen supervision, conduct timely education and follow-up inspection for foreign construction personnel, and often conduct targeted safety education in combination with the actual situation on the spot, thus standardizing many of their unsafe behaviors, such as illegal use of fire, electricity, climbing work, etc. , to avoid some safety accidents.
Speech on chemical safety responsibility II
Under the correct leadership of the party and government team of the company, and under the guidance of national, provincial and municipal laws, regulations and related documents on safety and environmental protection, the Safety and Environmental Protection Department carried out its work in accordance with the safety production policy of "safety first, prevention first, comprehensive management, environmental protection and benefit for the people" and the safety production goal of "avoiding and eliminating accidents to the maximum extent" formulated by the company at the beginning of the year. Life belongs to us only once, and there is no danger. Any accidental violation
Chapter, any irresponsible orders, any recklessness may bring a painful price. Therefore, it is still the focus of our future safety management to strengthen the investigation and management of potential safety hazards, correct all kinds of illegal behaviors and improve the safety awareness of all employees in the factory.
Because most of the products produced by our company are corrosive, the equipment is seriously aging, some monitoring methods are relatively backward, and the degree of intrinsic safety and automation is not high, which brings great hidden dangers to safety, and the safety situation is particularly severe. Safety work is all-staff * * *, and only when all-staff begin, will everyone automatically and consciously observe, manage, catch and check hidden dangers, and all kinds of responsibility systems and safety slogans can be implemented. Otherwise, only a few leaders and departments can grasp and manage it and never do it well. Therefore, we emphasize here that safety management should be done by all staff, so that everyone should be safe, everyone should pay attention to safety and everyone should manage safety. In order to let all employees firmly establish safety awareness from the heart and realize the passive implementation of "I want to be safe" to the active response of "I want to be safe", the following is a summary of the work of the Safety and Environmental Protection Department in the past 20 years.
I. Safety management
1. The Safety and Environmental Protection Department revised the company's various safety production responsibility systems, rules and regulations, and accident handling systems in combination with the company's actual situation. , so that the responsibilities and authorities of all departments and personnel of the company are more clear, more practical and timely. At the same time, each branch factory is required to supplement and revise the post safety operation procedures to better meet the post needs.
2. In order to improve the safety management level, the Safety and Environmental Protection Department has strengthened the software construction, and established files and accounts for safety inspection, hidden danger rectification, safety education and training, safety meetings, safety organizations, accident emergency, special equipment, hazardous chemicals files, labor protection articles, environmental protection, etc. The management of all kinds of documents, materials and archives has reached a new level, and the management level and work efficiency have been improved through this work.
3. Strengthen internal management and adjust the internal personnel of the Safety and Environmental Protection Department. Because an old employee retired in the first half of the year, there was no suitable candidate to take over the fire control and safety education work he was in charge of, so the internal work needed to be readjusted. After the adjustment, the division of labor of all functional personnel is more clear, so as to achieve a clear division of labor and perform their duties. On Monday, the safety officers of all branches and functional departments held a safety meeting to summarize last week's work and arrange safety work this week.
4. The safety and environmental protection department has strengthened the supervision and supervision of all kinds of tickets and operation activities, and punished and corrected the habitual violations and unsafe behaviors that have been formed for a long time in strict accordance with the relevant regulations on the management of tickets and operation activities, and all kinds of violations have been greatly reduced. However, because the company's hot work has not been standardized for many years, although all kinds of working tickets are complete now, the implementation is not very good and not all of them have been put in place. Especially for hot work analysis, although the company has a perfect system and formulated three-level hot work regulations, hot work analysis is still determined by experience. For many years, the company has not analyzed whether it is a secondary fire or a special fire. The analysis department has neither analysis equipment nor know how to analyze. Even the hydrogen pipeline fire is judged only by portable detectors, and the safety risk is difficult to control.
5. Strengthen the management of hazardous chemicals production site. By carrying out safety standardization, warning signs, warning instructions and hazard notices are set in the production sites that may cause occupational hazards, safety warning signs are set in the production workshops, height limit signs are set on the company's covered bridges, and wind flags are set in obvious positions, so that all employees have improved their awareness of safety precautions and have a corresponding grasp and understanding of some knowledge and measures for prevention and emergency treatment.
6. Strengthen the handling of all kinds of accidents and near misses, focus on the management of major and extraordinarily serious near misses, treat near misses as accidents, focus on analyzing the causes of accidents, implement preventive measures, and strengthen employees' safety awareness through accident handling. In case of production safety accidents, the company should seriously organize an accident analysis meeting to analyze the reasons, implement rectification measures, investigate the responsibilities of relevant personnel, further improve employees' safety awareness and urge them to take preventive measures.
Second, safety training
On April 9, 2000 1 and 15: 30, the company invited Hu Hui, a safety expert of Syngenta China Investment Co., Ltd. in China, and gave a vivid safety education to the middle-level leaders and safety management personnel of our company. By watching vivid accident cases, we have a more emotional understanding of the accident and greatly improve our safety awareness and prevention awareness.
2. The Safety and Environmental Protection Department organizes safety management personnel at all levels to participate in municipal safety training in a planned way. This year, 1 1 people exchanged safety qualification certificates for managers through retraining, which greatly improved the overall safety management level of our company and met the requirements of various departments for safety training of hazardous chemicals enterprises.
3. Special operators have received safety operation training. In the first half of the year, more than 50 operators of special types of work were retrained, and the training passed the examination of relevant departments, and new certificates were replaced. In the second half of the year, nearly 60 operators in dangerous positions were newly trained, which greatly improved the certificate-holding rate of special operations personnel and greatly reduced the number of undocumented personnel.
Third, safety inspection, hidden dangers rectification
1 led by the safety and environmental protection department, organize all functional departments to conduct safety inspection on the whole company at least once a month, and then the safety production committee will inform the whole company of the inspection results in the form of inspection reports, organize re-inspection according to the rectification time, and conduct special assessment on each branch factory and department according to the rectification rate of hidden dangers.
2. Combined with the investigation and management of hidden dangers in production safety and the special action of one hundred-day supervision of production safety in Jiamusi City, through comprehensive inspection, seasonal inspection, professional inspection, daily inspection and other inspection forms, in February, * * * the whole company found a total of 179 general hidden dangers, which were implemented one by one by the Safety and Environmental Protection Department, and the rectification project 172 was completed, with a rectification rate of 96. At present, there are 12 major safety hazards in the company, which have been reported to Agrochemical Corporation. 1 1 Major safety hazards have not been rectified for the time being due to the company's financial relationship and production reasons.
3. During holidays, the Safety & Environmental Protection Department organizes relevant personnel to conduct irregular safety inspections and conduct spot checks on various production posts. It was found that the phenomenon of "three violations" was severely punished, and educating employees to overcome paralyzed thoughts played a good role in consolidating the safety production of the whole company.
Fourth, the investment in production safety
1. At the beginning of last year, the frame structure of the liquid chlorine tank farm in the liquid chlorine section was listed as a major safety hazard rectification project by the provincial safety inspection supervision team, and it was required to complete the rectification before June 30, 2000, and at the same time, 2.5 million yuan was subsidized for the safety hazard rectification. At the beginning of this year, the company began to carry out rectification, transforming the liquid chlorine storage tank area of major hazard sources, changing indirect chlorine liquefaction into direct liquefaction, updating the liquid chlorine liquefaction process, and changing ammonia refrigeration into Freon refrigeration, which reduced risks and ensured the safety of employees in case of accidents.
2. Due to the company's lack of funds, there are still some hidden dangers that need to be rectified. For example, the use area of sulfuric acid storage tank area in chlor-alkali branch factory is seriously insufficient, and there is no safe distance, which has great security risks; Cracks appeared in the cement beam of the platform on the third and fourth floors of the synthesis workshop, the wall skin fell off seriously, the eaves on the northwest side were loose and the cement blocks often collapsed; Most glass tubes and gaskets in chloroacetic acid workshop of pesticide branch are seriously aging;
In the cooling tower of power station, the tower wall is seriously corroded, the top ring beam is seriously corroded, there are holes in the upper part of the tower body, and the lightning protection device with loose concrete at the top of the tower is disconnected in many places; The two electrostatic precipitators of power station boilers are seriously aging, and the dust exceeds the national standard by more than ten times; There is no special annular fire water pipeline in the factory area, which has been listed as a major fire hazard by the municipal fire department. These hidden dangers have not been rectified for a while, and only some extraordinary measures can be taken to monitor their use. I also hope that the company will solve them as soon as possible. I hope the company can solve it as soon as possible.
Five, all kinds of accident management
In 20__ years, although the overall safety management level of the company has been improved, the employees' awareness of safety precautions is not very strong, the risk factors are underestimated, the harmful factors cannot or will not be analyzed, the construction and maintenance operations are arbitrary, and violations occur from time to time. Other protective facilities are not advanced and scientific, and the intrinsic safety of equipment needs to be improved. The accident rate of 20 years up to 65438+February showed a downward trend compared with that of 20 years. In 20__ years, there were 7 industrial accidents, 1 fatal accidents and 4 non-personal injuries and near misses. In 20 years, there were 9 personal injury accidents (one of which was a hit-and-run accident). Based on the principle of "four no-misses", the Safety and Environmental Protection Department made a careful analysis of these eight industrial accidents, found out the causes of the accidents and implemented the rectification measures. The person responsible for the accident and the responsible unit were severely punished. Really achieved "the cause of the accident has not been ascertained, the responsible personnel have not dealt with it, the rectification measures have not been implemented, and the relevant personnel have not been educated."
In the past 20 years, the safety and environmental protection department has done a lot of work according to the company's safety production policy and objectives, and made some progress in safety management. However, compared with the national, provincial, municipal and company work requirements, there is still a big gap and deficiency. Next year, on the basis of earnestly summing up the successful experience of this year's safety and environmental protection work, we will continue to clarify the safety idea of "people-oriented, prevention first" and continue to adhere to the safety production policy of "safety first, prevention first, comprehensive management, environmental protection and benefiting the people". Strengthen the education and training of safety production, increase management and investment, and enhance the legal concept and consciousness of workers' safety production.
Speech on chemical safety responsibility 3
Safety first, prevention first is the general policy of chemical plant safety, always reminding me that I can't ignore the existence of potential safety hazards while working hard. If you want to implement the policy, you must first standardize your own operations and strictly remember six operators:
1, strictly implement the system of succession.
2, strict inspection tour.
3, strictly control the process operation
4, strictly implement the operation method
5, strictly abide by labor discipline
6. Strictly implement safety regulations.
This is not only to comply with the company's safety regulations, but also to improve their own safety protection.
Three-level safety education: company-level safety education, workshop-level safety education and class safety education. Mastering it skillfully and keeping it in mind is the premise of entering the factory! Safety education should not be sloppy, otherwise life will be in danger.
Four senses:
1, understand the post operation method and process conditions.
2. Understand the structure, specifications and performance of the equipment and the ins and outs of various objects, pipelines and lines.
3, understand the specific content of the responsibility system
4, understand the production standards and start-up measures.
Sihui:
1, which will run independently under normal and abnormal conditions.
2. Handle abnormal phenomena and accidents skillfully and safely.
3. Skilled operation and startup.
4. General equipment maintenance.
After more than half a month's training, I have enhanced my awareness of safety education! At all times, we should put safety first, safety first and prevention first. My obligations and duties in the factory, as well as my rights and obligations. And some fire safety knowledge, such as dry powder fire extinguishers, carbon dioxide fire extinguishers, foam extinguisher, etc. There are also some emergency measures and escape methods in unexpected situations. These things benefit us a lot, because they are close to our lives, enhance our self-protection ability and protect our lives, which is also a prerequisite for verifying that we are a qualified chemical worker.
Here, I would also like to thank several trainers in particular. Your efforts have brought us gains! You are the most lovely people in the company, because you can develop healthily and stably in the company. You have solved the worries of the company and made a great contribution to our safe production in the future. Let's keep it in mind and put safety first!
Speech on chemical safety responsibility 4
Safety in production is an important work in company management, especially in chemical enterprises like mine. The realization of safe production lies in the shaping and cultivation of safety consciousness. Looking back on the past six months, our company has made some achievements in safety production management, which is inseparable from the company's consistent adherence to the policy of "safety first, prevention first, comprehensive management and continuous improvement", and its insistence on strengthening safety responsibility, deepening hidden danger investigation, strict supervision and strengthening safety publicity and education. Our methods are mainly:
Full participation and wide coverage
The company has always adhered to the goal of training all employees on safety production knowledge, requiring every employee to receive safety education and training. In the first half of the year, we held fire safety training activities for all employees, from the fire escape drill in February to the safety production month in June. In addition, every new employee must have three-level safety education before entering the company, do a good job in pre-job training of safety production, and conduct safety education in the workshop and team. At the same time, employees are educated about safety knowledge in the form of class meetings and early meetings, forming a series of safety education not only for front-line employees, but also for team leaders and managers, involving every employee of the company, achieving the goal of full participation and full education.
There are various forms of safety education.
The company's safety production education, our training methods include traditional learning and training methods, supplemented by photo publicity, video viewing, on-site operation and so on. We broadcast safety information videos in the factory, hold a fire safety publicity photo exhibition in the staff canteen, conduct fire drills in the factory, explain the use and on-site operation of fire extinguishers, visit fire emergency rescue facilities, arrange fire escape drills in the factory, and so on. We have also carried out various projects to consolidate our knowledge in various ways, which can not only easily complete the training, but also master the knowledge to the greatest extent and play a role in the production and operation process to the greatest extent.
Safety responsibilities should be implemented step by step.
Safety production education is not only the imparting of knowledge, but also the implementation of responsibility. At the beginning of the year, the company signed the safety responsibility letters of all departments and implemented them step by step. All departments shall implement the responsibility for production safety, and at the same time ensure the daily and meticulous development of safety education.
Safety awareness, self-sublimation
The ultimate goal of safety production education is to root safety awareness in the hearts of every employee, improve the quality of employees and cultivate the habit of paying attention to safety everywhere. As we all know, the cultivation of habits can't happen overnight. To change employees' safety awareness and upgrade from "I want to be safe" to "I want to be safe", only long-term persistence and continuous education can be realized. The company's safety production education from the employees' unconsciousness at the beginning to the active participation now has made the company's safety management personnel see the hope and self-sublimation of safety awareness, provided that the safety education is constantly adhered to and the follow-up is the normal operation of safety production. A series of safety education activities in the first half of the year not only achieved a bumper harvest, but also made us full of confidence in the safety production management in the second half of the year.
Speech on chemical safety responsibility 5
For chemical production enterprises, toxic, harmful, flammable and explosive hazardous chemicals are basically exposed in the production process of various chemical products and activities around product production. In view of the particularity of production in chemical enterprises, its safety and environmental protection work is particularly important. Once an enterprise has an accident and various environmental pollution incidents, it will not only affect the life safety and health of employees and surrounding residents; At the same time, it will make enterprises suffer huge economic losses and even have a very bad impact on the reputation of enterprises.
The development of modern chemical industry, on the one hand, brings a lot of wealth and comfortable living environment to human beings, on the other hand, it also consumes a lot of resources and produces serious environmental pollution, which makes it in a situation of high energy consumption, high pollution and high destruction for a long time. In recent years, environmental protection, cleaner production and safety problems have troubled the world and attracted more attention. It has become the trend of global environmental development to implement the sustainable development strategy aimed at protecting human health and safety, saving energy and protecting the environment. First: Saving Energy With the continuous improvement of social awareness of energy conservation, it is not feasible to continue to rely on high consumption and low production to support economic development. To achieve sustainable development, we must take the road of resource conservation and change the mode of economic growth. According to the statistics of China Chemical Industry, at present, the energy consumed as raw materials accounts for 40% of the total energy consumption in chemical production in China, and the remaining 60% is consumed as public works. Therefore, the petrochemical industry should make full use of resources, reduce energy consumption and realize economic development. The centralized construction of super-large chemical parks has become the mainstream trend of petrochemical development in the world today. Because the chemical industry chain is particularly developed, integrated and centralized development can produce significant synergy, concentrate on the use of by-products, rationally develop the downstream industrial chain, improve the comprehensive utilization level of resources, and promote the structural adjustment, optimization and upgrading of the chemical industry. From an international perspective, China should build a modern chemical park with high starting point, high level and high quality, and build a platform for the sustainable development of the chemical industry.
Second: Environmental Protection Due to the rapid growth of chemical product production capacity year after year, energy conservation and emission reduction in the chemical industry not only have to face the "chronic diseases" formed for many years, but also have to deal with the governance pressure brought by the new production capacity. New chemical projects have undoubtedly become a new burden for energy conservation and emission reduction. However, chemical enterprises generally feel that the investment in energy conservation and emission reduction is insufficient, so they should raise funds for energy conservation and emission reduction through multiple channels, focus on supporting energy conservation and emission reduction projects, and give enterprises subsidies for technological innovation in energy conservation and emission reduction. People's understanding of pollution prevention and control is gradually deepening. In 1970s, point source control was the main method. In the 1980 s, the combination of prevention and control and comprehensive management were gradually implemented; In 1990s, the whole process of chemical pollution was controlled. By the beginning of the 20th century, the concepts of clean production and circular economy have been recognized by enterprises and become the most effective way to fundamentally solve pollution. Enterprises will effectively combine the implementation of clean production, the realization of circular economy with the adjustment of product structure, technological progress of enterprises and the strengthening of enterprise management to create a green industrial chain, establish a good corporate image and improve their own survival and development capabilities. Cleaner production refers to continuous measures such as improving design, using clean energy and raw materials, adopting advanced technology and equipment, improving management and comprehensive utilization.
Reduce pollution from the source, improve the utilization rate of resources, reduce or avoid the generation and discharge of pollutants in the process of production, service and product use, so as to reduce or eliminate the harm to human health and the environment. Safe production means that all kinds of accident risks and injury factors that endanger the life safety and health of workers in social production activities are always under effective control through the harmonious operation of people, machines and environment. Safety in production is a systematic management activity under the leadership of the party and the government to achieve the goal of safety in production, which consists of four parts: source management, process control, emergency rescue and accident investigation. The work of safety in production mainly includes the safety prevention, market access, supervision, emergency rescue and accident investigation by the government and its relevant departments, safety services, scientific research and education, publicity and training of social intermediary organizations and other organizations. Social subjects engaged in safety production include corporate responsibility subjects, intermediary service subjects, government supervision subjects and employees engaged in safety production.
Characteristics of chemical production: First of all, all these accidents are inseparable from the characteristics of chemical production, and there are many unsafe factors in these characteristics. It is precisely because of these unsafe factors that workers in a chemical enterprise should deeply understand these characteristics in order to prevent all kinds of accidents. Drawing lessons from the book "Technical Training Reader for Chemical Workers", chemical production mainly has the following characteristics:
Most of the raw materials used in chemical production belong to flammable, explosive and corrosive substances. At present, there are more than 6 million kinds of chemicals in the world, about 60,000 to 70,000 kinds are often used in production, and about 30,000 kinds are in China. About 70% of these chemicals are flammable, explosive, toxic and corrosive. Improper management of production, use, storage and transportation will lead to accidents such as fire, explosion, poisoning and burns, which will bring great losses to safety production.
There are many high-temperature and high-pressure equipment. Many chemical production are inseparable from high-temperature and high-pressure equipment, focusing on energy. If the design and manufacture are not carried out according to the specifications, the quality will be unqualified; Or operational errors, catastrophic accidents will occur.
The process is complex and the operation requirements are strict. The production of a chemical product often consists of several processes, and each process consists of several chemical units and several special equipment and instruments to form a production system, forming a production line with long technological process, complex technology, many technological parameters and strict requirements. Therefore, anyone is required not to change it without authorization and strictly abide by the operating procedures. Pay attention to patrol inspection, carefully record, correct deviation, strictly shift, pay attention to the connection of upper and lower processes, and eliminate hidden dangers in time. To prevent all kinds of accidents.
There are many three wastes and serious pollution. The chemical industry produces a lot of waste gas, waste residue and waste liquid in production, which is a big polluter in the national economy. Among the "three wastes" discharged, many substances are flammable, explosive, toxic, corrosive and harmful, which are all unsafe factors in production.
There are many accidents and great losses. According to statistics, hundreds of major accidents occur in the chemical industry every year. Causing casualties and causing great economic losses to the country. More than 70% of accidents are caused by illegal command and illegal operation. It can be seen that it is very important to carry out technical learning, improve the quality of workers, and carry out safety education and professional skills education in the workforce.
Chemical safety responsibility speech 202 1 related articles:
★ chemical safety lecture 202 1
★ Chemical Industry Safety Speech 202 1
★ Chemical Safety Lecture 202 1
★ Enterprise Safety Speech 202 1 year
★ Safety Month Speech 202 1 Latest
★ Chemical Plant Safety Speech 202 1
★ Various safety speech model essays
★ 202 1 speech of safety production month
★ 5 excellent speeches on chemical safety production.
★ Five speeches in Safety Month 202 1