Safety inspection report 1

In order to do a good job in safety production in our project department, earnestly implement the responsibility system for safety production, intensify the investigation and rectification of hidden dangers, and prevent the occurrence of safety production accidents. My project department has carried out safety inspection, and now the inspection situation is reported as follows:

I. Basic information

Our project department carried out safety self-inspection on June 20 10 to find hidden dangers and implement rectification measures. In view of the problems existing in the project, such as imperfect safety production management system, imperfect post operation procedures, untrained special operators, unqualified dangerous goods inventory, and irregular electrical appliances and circuits, some suggestions are put forward.

Second, the existing problems

In this safety inspection, the main problems found are:

1, the safety production management system, post operation procedures and safety management institutions are not perfect, and the responsibility has not been implemented to people.

2. The Project Department failed to provide safety education and training for employees, and special operations personnel failed to receive training as required, and they can only take up their posts after obtaining the qualification certificate of special operations.

3, electrical appliances, lines are not regularly checked, lines are aging, wiring is not standardized, temporary electricity is privately connected, and the breaker is uncovered.

4. The fire-fighting equipment is insufficient, expired and not in obvious position.

Third, the rectification measures

In view of the above problems, our project department rectified on time, reviewed on time, followed up the rectification, and ensured that the rectification was in place.

1, the management personnel of the project department shall establish the awareness of safety in production. Strengthen measures, earnestly implement the responsibility system for production safety, the project manager should put the work of production safety on the important agenda, and the top leader should personally grasp it. It is necessary to intensify the work of production safety, conscientiously implement the policy of "safety first, prevention first", adhere to the principle of who is in charge and who is responsible, implement the responsibility system for production safety at all levels, and earnestly implement it.

2, law-abiding, establish and improve the rules and regulations of production safety. Establish and improve safety production rules and regulations, post operation procedures and organizational structure, and truly implement rules, laws, organizations, systems and measures. At the same time, we should do a good job in propaganda, education and training of workers' safety production, and enhance their awareness of safety production and legal concept.

3, regular inspection, careful investigation and rectification of hidden dangers. My project department's inspection of production safety should be regular, institutionalized and standardized, which is mainly reflected in the word "diligence" in the work. Be diligent in asking questions, urging and checking. It is necessary to urge the safety hazards raised in the inspection to speed up the rectification, nip them in the bud and reduce the occurrence of production safety accidents.

4. Strict discipline and serious accountability. The project department should do a good job in the prevention of production safety accidents and put an end to all kinds of accidents. When an accident occurs, we should conscientiously implement the accident reporting system and report it step by step in time.

Safety production self-inspection report II

In order to thoroughly implement the165th executive meeting in the State Council, implement the spirit of the important instructions of the central leading comrades, profoundly draw lessons from accidents, implement safety responsibilities, strengthen preventive measures, effectively do a good job in the company's safety production, effectively prevent and resolutely curb accidents, the company's safety committee will implement safety responsibilities and systems, conduct safety publicity and education training, implement safety responsibilities, rectify hidden dangers, and deal with emergencies in accordance with the requirements of the Notice on Further Improving Safety Production. The specific contents of the self-examination are as follows:

I. Implementation of safety system and responsibilities

The company's safety production management system is completely filed, all systems are sound, the emergency plan is complete, the drill is feasible, the assessment effect of various operating procedures is good, and cadres and workers at all levels consciously abide by the contents of the systems and procedures, and there is no violation.

The leaders of the company and the team leader of the production line signed the Responsibility Letter for Team Leader's Safety in Production. The team leader has a strong sense of safety in production and conscientiously implements the idea that everyone is responsible for safety in production. Employees earnestly perform their respective safety responsibilities in their posts, which provides a strong guarantee for the implementation of various measures for safety in production.

Second, safety publicity, education and training

According to the overall arrangement of the superior leaders, the company organized various forms of missionary activities. First, through the convening of safety production meetings and other forms, in-depth legal education, publicity and study of the "Safety Production Law" and other laws and regulations. The second is to enrich the forms of publicity activities by organizing employees.

Carry out safety knowledge education, participate in fire safety drills and chlorine leakage drills, and publicize all kinds of safety knowledge and safety regulations by billboards, banners and slogans. So that the majority of employees have a profound understanding of safety, safety has a wide range of concerns, greatly improving the safety awareness of all employees.

Through various forms (warning signs, billboards, slogans, etc. ), clear the hazards and preventive measures existing in the employee's post, and clear the rescue measures when the hazards occur. Train employees to master the emergency handling skills of small industrial injuries and keep the injuries to a minimum. Enable employees to skillfully use labor health protection articles, reduce occupational hazards and prevent the occurrence of occupational diseases. So that employees can correctly and skillfully take self-help and mutual rescue measures in sudden accidents. Company * * * organized safety production knowledge training for 3 times, held safety production meetings for 5 times, summed up the hidden dangers existing in safety production work, formulated rectification and preventive measures for the existing safety hazards, exchanged safety work experience, conveyed safety production documents, arranged relevant safety work, and notified the safety inspection.

Third, the implementation of safety responsibilities and hidden dangers rectification

Maintenance records of equipment, pipelines, safety protection devices and protective facilities such as platforms, ladders, guardrails and supports are complete and effective. The surfaces of equipment and pipelines shall be clean, free from damage, cracks and leakage, and all valves and instruments shall be normal. All kinds of fire safety facilities are complete, qualified and effective, and the operators are required to wear labor protection articles. In toxic and harmful places, the protective first-aid articles stored in the accident cabinet are complete and effective, and they are inspected regularly.

The installation and maintenance of electrical equipment should be operated by electricians. Non-electricians are not allowed to decorate electrical equipment and lines. Accident-prone electrical equipment should be managed by special personnel, and the responsibility should be implemented to people. Electricians can be equipped with labor protection articles according to regulations, operate according to operating procedures and check regularly.

Protective facilities and warning signs are set up on the lines, all electrical equipment and all high-voltage dangerous places. Non-electrician operators are strictly prohibited from entering the guardrail of the distribution room or electrical equipment, pulling and hanging it privately, and approaching high-voltage dangerous places.

According to the requirements, the members of the team of the Safety Committee carried out four major inspections of safety production in stages (Spring Festival, Spring, May Day and Safety Production Month). All kinds of hidden dangers were rectified, and the hidden dangers of accidents were really eliminated. Conduct a self-inspection once a month. In the process of inspection, adhere to the xx principle, conduct a comprehensive investigation of weak links and possible problems, and focus on checking whether the safety system is implemented, whether the safety measures are in place, whether the safety protection facilities and equipment are complete and in good condition, and whether the hidden dangers are rectified.

In order to prevent accidents, the team of the company's safety Committee conducted two emergency plan studies on employees in this department. On this basis, according to the particularity of the device production, the fire drill and chlorine leakage drill are simulated. During the drill, the ability of employees to deal with emergencies, the investigation and handling of emergencies and the self-protection measures of personnel were emphatically investigated. Through on-site emergency plan drills, the safety awareness of employees and managers will be improved, so that employees can clearly understand the importance of safe production, enhance their ability to respond to emergencies, gradually improve and perfect emergency rescue plans, and improve emergency handling and on-site rescue skills.

Fourth, the existing problems:

1. The classification of the company's safety production materials is not in place. Although the safety production materials of enterprises are complete, they are not classified and stored.

2. Safety education and training is weak. Safety production education activities are not carried out vigorously, especially the safety production education for drivers is a mere formality, and the safety production awareness of employees is slowly improved.

3. The investigation of the company's security risks has not been implemented.

Verb (abbreviation for verb) What to do next

1. Further strengthen the implementation of the classification and arrangement of the company's safety production materials, and ensure that the company's safety production materials are accurate and complete, and stored in categories.

2. Strengthen the education and training of employees and drivers of the company, conduct safety education and study once a month, implement the study and education system, continuously improve their safety awareness and responsibility awareness, and earnestly safeguard the road transportation safety order.

3. Further strengthen the implementation of the company's fire facilities management, and intensify the investigation of potential safety hazards.

Safety production self-inspection report 3

In order to thoroughly implement the165th executive meeting in the State Council, implement the spirit of the important instructions of the central leading comrades, profoundly draw lessons from accidents, implement safety responsibilities, strengthen preventive measures, effectively do a good job in the company's safety production, effectively prevent and resolutely curb accidents, the company's safety committee will implement safety responsibilities and systems, conduct safety publicity and education training, implement safety responsibilities, rectify hidden dangers, and deal with emergencies in accordance with the requirements of the Notice on Further Improving Safety Production. The specific contents of the self-examination are as follows:

I. Implementation of safety system and responsibilities

The company's safety production management system is completely filed, all systems are sound, the emergency plan is complete, the drill is feasible, the assessment effect of various operating procedures is good, and cadres and workers at all levels consciously abide by the contents of the systems and procedures, and there is no violation.

The leaders of the company and the team leader of the production line signed the Responsibility Letter for Team Leader's Safety in Production. The team leader has a strong sense of safety in production and conscientiously implements the idea that everyone is responsible for safety in production. Employees earnestly perform their respective safety responsibilities in their posts, which provides a strong guarantee for the implementation of various measures for safety in production.

Second, safety publicity, education and training

According to the overall arrangement of the superior leaders, the company organized various forms of missionary activities. First, through the convening of safety production meetings and other forms, in-depth legal education, publicity and study of the "Safety Production Law" and other laws and regulations. The second is to enrich the forms of publicity activities, by organizing employees to carry out safety knowledge education, participating in fire safety drills and chlorine leakage drills, and publicizing various safety knowledge and safety regulations by using billboards, banners and slogans. So that the majority of employees have a profound understanding of safety, safety has a wide range of concerns, greatly improving the safety awareness of all employees.

Through various forms (warning signs, billboards, slogans, etc. ), clear the hazards and preventive measures existing in the employee's post, and clear the rescue measures when the hazards occur. Train employees to master the emergency handling skills of small industrial injuries and keep the injuries to a minimum. Enable employees to skillfully use labor health protection articles, reduce occupational hazards and prevent the occurrence of occupational diseases. So that employees can correctly and skillfully take self-help and mutual rescue measures in sudden accidents.

Company * * * organized safety production knowledge training for 3 times, held safety production meetings for 5 times, summed up the hidden dangers existing in safety production work, formulated rectification and preventive measures for the existing safety hazards, exchanged safety work experience, conveyed safety production documents, arranged relevant safety work, and notified the safety inspection.

Third, the implementation of safety responsibilities and hidden dangers rectification

Maintenance records of equipment, pipelines, safety protection devices and protective facilities such as platforms, ladders, guardrails and supports are complete and effective. The surfaces of equipment and pipelines shall be clean, free from damage, cracks and leakage, and all valves and instruments shall be normal. All kinds of fire safety facilities are complete, qualified and effective, and the operators are required to wear labor protection articles. In toxic and harmful places, the protective first-aid articles stored in the accident cabinet are complete and effective, and they are inspected regularly.

The installation and maintenance of electrical equipment should be operated by electricians. Non-electricians are not allowed to decorate electrical equipment and lines. Accident-prone electrical equipment should be managed by special personnel, and the responsibility should be implemented to people. Electricians can be equipped with labor protection articles according to regulations, operate according to operating procedures, and regularly check the lines and all electrical equipment. All high-pressure dangerous places are equipped with protective facilities and warning signs. Non-electrician operators are strictly prohibited from entering the guardrail of the distribution room or electrical equipment, pulling and hanging it privately, and approaching high-voltage dangerous places.

According to the requirements, the members of the team of the Safety Committee carried out four major inspections of safety production in stages (Spring Festival, Spring, May Day and Safety Production Month). All kinds of hidden dangers were rectified, and the hidden dangers of accidents were really eliminated. Conduct a self-inspection once a month. In the process of inspection, in view of the weak links and possible problems, we will conduct a comprehensive investigation seriously, focusing on checking whether the safety system is implemented, whether the safety measures are in place, whether the safety protection facilities and equipment are complete and in good condition, and whether the hidden dangers are rectified.

Fourth, the formulation and exercise of emergency plans

In order to prevent accidents, the team of the company's safety Committee conducted two emergency plan studies on employees in this department. On this basis, according to the particularity of the device production, the fire drill and chlorine leakage drill are simulated. During the drill, the ability of employees to deal with emergencies, the investigation and handling of emergencies and the self-protection measures of personnel were emphatically investigated. Through on-site emergency plan drills, the safety awareness of employees and managers will be improved, so that employees can clearly understand the importance of safe production, enhance their ability to respond to emergencies, gradually improve and perfect emergency rescue plans, and improve emergency handling and on-site rescue skills.

Safety production self-inspection report 4

In order to ensure the fire safety and anti-theft safety of our company's office environment, according to the arrangement of the company's leaders, the head of the comprehensive office led the relevant office personnel to form a safety inspection team, and conducted a strict inspection on the fire safety and anti-theft work of the company's office building and the downstairs open-air parking lot on the afternoon of June 5438+February 65438+February. The inspection is now reported as follows:

I. General situation of safety inspection

The inspection team first inspected the doors and windows, power circuits and switches, fire safety passages in corridors, fire-fighting facilities, environmental sanitation, etc. of all floors in the office building. Then the outdoor parking lot, green belt and lighting facilities outside the building were inspected. Through comprehensive investigation, the inspection team found that the inspection results were generally good and there were no major security risks.

Second, the existing problems

1. The doors leading to the balconies on both sides on the fifth floor were not locked, the doors of the conference room on the fourth floor and an aluminum window of the conference room could not be locked, and the door lock on the right side of the sliding door of the reading room was damaged, so outsiders could enter and exit at will, which was a potential safety hazard.

2. sundries are piled up in the reading room, which is messy and has fire safety hazards.

3. The whole building is only equipped with two dry powder fire extinguishers, and the shelf life of dry powder in the fire extinguishers is unknown; The fire hydrants on all floors are locked, but the key is missing, so it is impossible to check whether the fire hydrants can be used normally. There are fire safety hazards.

4. Some offices on the second floor don't lock the door after work, which is a potential safety hazard.

Third, the rectification measures and suggestions

1. Please ask a professional locksmith to install new locks for the doors leading to the terrace on both sides of the fifth floor, and replace the doors and windows of the conference room on the fourth floor, the reading room door and the fire hydrants on each floor with new locks.

2. Classify the reading rooms according to the "6S" management standard to eliminate fire safety hazards.

3. Replace and purchase dry powder fire extinguishers as needed, and check the safety status of fire hydrants after replacing new locks on each floor.

4. Once again, all floors of the office must lock the doors and windows after work. In view of the security risks found in the inspection, the inspection team will contact relevant personnel to make timely rectification to ensure that there are no dead ends in fire safety, no loopholes in anti-theft safety, and create a stable and safe working and living environment for the employees of the company.

5 copies of safety production self-inspection report.

With regard to the requirements of 20xx safety inspection notice, our company meets the requirements of self-inspection by safety officers, quality controllers and construction team leaders, and leaders at all levels are welcome to guide the work on site. Aiming at the quality and safety problems of construction projects, quality and safety involves a wide range, is practical, has many influencing factors and has high technical requirements. Engineering quality and safety are the core of engineering construction and the key to the success or failure of engineering construction. Only by grasping the two links of quality and safety can the project be carried out smoothly and good social, economic and environmental benefits be achieved.

In order to ensure the quality and construction safety of construction projects, our company adheres to the principles of "quality first" and "safety first", adopts the policy of "prevention first", implements dynamic management, emphasizes "people-oriented" quality and safety control, ensures project quality and construction safety, adheres to quality standards and operating specifications, and strictly accepts finished products to achieve social excellence. When our company enters the construction stage, we will take the following measures to ensure quality and safety control:

I. Quality control measures

1, quality policy: adhere to the policy of "quality first" and establish a sound and perfect leadership team.

2. Quality management: all management functions of formulating and implementing the quality policy.

In order to achieve the specified quality objectives, organize teams and employees to participate in relevant learning activities and bear corresponding responsibilities for them.

3. Quality system: implement the organization, responsibilities, procedures, processes and resources of quality management, and strictly control the acceptance of raw materials and semi-finished products.

4. Quality control: adopt operation techniques and activities, cooperate with the construction unit, supervision engineer and quality supervision department, eliminate the causes of problems at all stages of quality links, and strictly control "process quality".

5. Quality assurance: meet the quality requirements of products or services and realize the existing quality assurance. Verify and audit production, installation and inspection. In order to gain the trust of the construction unit, provide necessary information and evidence to the relevant departments.

6. Quality objectives: Under the premise of ensuring the realization of enterprise quality objectives, the quality system makes the enterprise management mechanism in the best combination of quality and cost. Only by following the principles of adapting to the environment, realizing enterprise goals and adapting to the characteristics of construction projects, can we establish and improve the company's quality system, adapt to various environments, adapt to various engineering types and construction characteristics, obtain the best cost, fully realize enterprise goals, and make enterprises invincible in the market competition and obtain the greatest benefits.

Second, the technical measures of safety management

The safety management of the construction site focuses on controlling the unsafe behavior of people and the unsafe state of things. Put an end to all accidents, avoid accidental injuries and reduce accident losses.

1, implement safety responsibility system and responsibility management.

(1) Establish and improve the safety production leading organization headed by the project manager, and organize and lead safety management activities.

(2) Establish the responsibility system for production safety of personnel at all levels, and clarify the safety responsibilities of personnel at all levels. Pay attention to the implementation of the system, pay attention to the implementation of responsibilities, and regularly check the implementation of safety responsibilities.

(3) Establish a full-time responsibility system for production safety and adhere to the responsibility system for production safety. Do it vertically to the end, without missing a link.

(4) All managers and operators sign safety agreements with the construction project department, and sign safety guarantee contracts with the project department.

2. Safety education and training

The project department regularly carries out safety education and training at fixed points to improve the knowledge of safety production and effectively prevent people's unsafe behaviors.

(1) All management and operation personnel have high basic conditions and quality, and hold relevant certificates.

(2) All construction workers have legal labor procedures, and temporary workers can only enter the construction site and jobs after signing labor contracts and receiving admission education.

(3) New workers should complete three-level safety education before entering the site, focusing on general safety knowledge, production organization principles, production environment and production discipline. Emphasize the non-independence of operation. Give priority to production organization principles, environment, discipline and operating standards.

(4) Mobilize all staff to carry out self-examination and self-correction, system inspection, and form a situation of self-examination and self-correction, inspection and reform. Make all employees improve in finding dangerous factors, get education in eliminating dangerous factors and get exercise in safety inspection.

Third, civilized construction.

(1) Significance of civilized construction: Civilized construction is an important symbol of modern construction, a basic management work of construction enterprises and a window of enterprises. Adhering to civilized construction is of great significance.

(2) Civilized construction measures: Take the project manager as the team leader in the construction site, improve the personal post responsibility system, and implement the system of self-inspection, mutual inspection and handover inspection according to specialty, post, region and building number. To achieve self-production, Nissan Nissin, cleaning after work, standardized management.

(3) Environmental protection measures: strengthen the monitoring of dust and noise on the construction site, eliminate the pollution of dust and sewage, strengthen the contact with local environmental protection departments, and make contributions to the good environmental benefits of enterprises.

Safety production self-inspection report 6

In order to further strengthen and improve the safety work of the project department, respond to the call of the institute, effectively protect the life safety and property safety of the employees, and ensure the normal construction order of the project, combined with the actual situation of the project department, our department conducted a serious inspection on the safety work of the construction site and carried out hidden dangers investigation and management activities on the construction site. The self-inspection and rectification situation is summarized as follows:

I. Safety management

1, establishment and improvement of safety organization.

The project department has established a safety management network with the project manager as the first responsible person, as well as a safety production responsibility system and a safety management system. Equipped with full-time security officers, responsible for on-site safety patrol inspection and construction site safety inspection, forming a top-down safety assurance system.

2, the implementation of safety management system and responsibility system

(1) At present, the safety rules and regulations of the project department are complete and have strong operability. Continuously improve the execution of the safety and civilized construction system, strengthen the management of safety and civilized construction, and prevent accidents.

(2) In order to ensure the safety in production, the project department formulated the safety target indicators and decomposed them step by step according to the relevant requirements of the company, and defined the safety responsibilities of personnel and departments at all levels, which were put in place in the construction process.

The Project Department shall sign safety responsibility letters with the heads of various construction ZuoYeDui, and strictly implement the provisions on the responsibility system for production safety at all levels and the accountability for safety accidents. The Quality and Safety Department of the Project Department shall supervise, inspect and assess the implementation of the safety responsibility system, promptly remind and educate those who violate the responsibility system, and reward and punish them according to the assessment results.

3, safety inspection, hidden trouble investigation

In addition to the daily safety patrol inspection, the project department also prepares various safety warning signs and construction signs according to the site conditions, and places corresponding signs at the entrance, passage and near electrical equipment of the construction site.

Warning placards, to remind employees to pay attention to, do a good job of safety protection for themselves and others, and eliminate potential safety hazards.

4. Safety education and training

(1) The Project Department provides timely safety education and training to new managers and workers from time to time. The main contents of the training include: enterprise rules and regulations, basic safety knowledge, construction safety precautions, various related safety technical measures and operating procedures, and emergency rescue plan learning.

(2), according to the provisions, to participate in the electrician, welder, loader driver and other special operations personnel safety technical training and evidence collection.

(3) security team education activities carried out by various construction teams.

Second, the site construction safety situation

1, temporary facilities

(1) Temporary facilities are planned in a unified way in strict accordance with the requirements, and the layout is reasonable.

(2) Temporary facilities shall meet the technical requirements of fire prevention, rain protection and heat preservation. Living office area, construction area, warehouse, mechanical equipment parking area, etc. Patrol around the clock to ensure the safety of materials on site.

2. Use electricity safely

"One machine, one brake and one leakage" of electrical equipment on the construction site to ensure the safety of electricity use; Power supply equipment is equipped with warning signs. Lighting lamps and power supply lines shall be erected as required. The electrician on duty will often patrol to deal with hidden dangers in time to prevent accidents.

3. Special equipment

Daily operation, maintenance and handover records of major mechanical equipment shall be kept by special personnel. Check, repair and maintain the equipment and transport vehicles regularly during use, and fill in the equipment operation, repair and maintenance records. Immediately stop, rectify or repel the equipment with potential safety hazards. Scaffolding construction

4, fire management

The project department has formulated the fire management responsibility system and put it in place. Formulate and improve the fire emergency plan.

The project department will strengthen the inspection and monitoring of fire-prone places.

(1) There is no illegal use of open flame for heating in the construction area; Check the dormitory, found no illegal use of high-power electrical appliances and other phenomena, lighting power cord standard selfless connection.

(2) There is no violation in the work area or part where fireworks or smoking are prohibited.

5, safety protection facilities

During the construction period, safety management personnel can formally wear and use protective equipment such as safety helmet and safety belt; Protective facilities and obvious warning signs shall be set at the mouth of the cave and dangerous parts; Fire-fighting facilities are arranged near power-consuming parts and flammable materials.

Three. Problems existing in safety management

1, individual personnel have weak safety awareness, and there are still habitual violations on the construction site.

2. The layout of construction power lines is chaotic and needs to be further standardized.

3. Check the equipment regularly and improve various systems; However, the inspection data and records of the equipment itself are incomplete; Need to be further improved.

4. Individual safety protection facilities can't keep up with the construction progress, which leads to the lag of safety protection in the construction process.

IV. Corrective measures taken:

In order to ensure the safety of engineering construction and eliminate all kinds of potential safety hazards, aiming at the main problems existing in the process of self-inspection, the project department puts forward the following rectification measures:

1, the project department will strengthen supervision, carry out safety education in batches, and educate and publicize safety knowledge, laws and regulations for staff and cadres by means of daily inspections, inspections, meetings, safety education and training, billboards, newspapers, documents, etc., so as to improve staff's safety awareness and responsibility awareness and prevent safety accidents.

2. Continue to pay attention to the problem of electricity consumption in construction, strictly investigate the phenomenon of illegal electricity consumption in workers' dormitories, and make a unified and standardized layout of on-site lines.

3, increase the supervision of habitual violations. To strengthen safety education, management supervision and punishment, we must improve employees' safety awareness ideologically.

4, improve and perfect the system, promote the comprehensive safety management work rules-based, put in place. Implement the responsibilities of all levels and departments in strict accordance with the safety responsibility system.

5, in a timely manner in accordance with the provisions of the project department, regularly carry out safety inspection and hidden trouble investigation and management, do a good job in the construction site safety hidden trouble search and rectification.

In a word, through this inspection, we found some shortcomings and omissions in the safety work of the project department. The project department carried out rectification in time, which was effectively controlled, but the safety work is a long-term work. The project department will continue to pay close attention to safety, consolidate the basic work of safety management, improve employees' safety awareness, better implement various tasks and requirements of safety management, further enhance employees' safety responsibility awareness, clarify their respective responsibilities, and provide safety guarantee for the smooth progress of project construction.