Previously, netizens sent a batch of mobile boxes seeking to brush machines, hoping to watch TV for free, including a mobile convergence enterprise gateway. At that time, the enterprise gateway failed to brush the machine successfully and has been obsessed with it. Two days ago, Guangdong netizens sent one, China Mobile Convergence Enterprise Gateway, which was successfully completed today. You can install software at will, watch live TV for free, and order online video for free. The specific implementation method is introduced below.
Introduction to box
This box integrates optical cat, wireless router and network set-top box, and has rich box interfaces. At the bottom of the box is an optical cable access port, followed by two LAN ports, two USB ports, an external infrared receiving socket, a telephone interface, an AV video output interface, an HDMI high-definition output interface and a power socket.
This kind of box is suitable for small and micro enterprises. After opening related services, a box can solve all problems. The box comes with its own wireless router, which does not need to be connected separately (of course, one can be added to expand the coverage of wireless signals), and the built-in network set-top box does not need to be purchased separately.
In short, optical cable access, a box to solve all the needs, equipment access, telephone access, video access. I feel that this kind of box is more suitable for a small shop with only one hall, which can save complicated wiring.
Brush thinking
Because it is the original cable connection, and the box comes with wireless, the optical cat should work in routing mode, and the LAN port and wireless wlan can directly access the equipment to surf the Internet. There are various ways for the network set-top box to access the network, such as dhcp, ipoe, static ip, etc., but only the account verification program built in the IPTV box. If we set the wired connection of the box to dhcp, then the box should be in the same position with two LAN ports, which means that this gateway has three LAN ports, one of which is built into the network set-top box.
Follow this idea and practice.
Network access
Because this enterprise gateway is connected by optical cable, but we don't need optical cable broadband now, we can only use LAN port to connect, so this enterprise gateway (hereinafter referred to as box) is equivalent to a three-port switch. As long as the dhcp server inside the box is turned off, and then the external network is connected to the LAN port, the network set-top box can obtain the IP address from other wireless routers, thus accessing the Internet.
Specific operation
Remove the small board with TTL brush, and install the third-party desktop in the U disk into the network set-top box. After disassembling the machine, measure the three pins GND, TX and RX of ttl as shown in the figure below, and then connect the ttl brush board. I use ch340 model, you can also use other models.
Open the computer software and connect the small board. Turn on the box, wait for the code to scroll, and install the third-party desktop as follows. Here I withdraw cash, copy the desktop program to the root directory of the U disk and rename it dbzm.apk
Enter the command df to check that the mount directory of the USB flash drive is/storage/external _ storage/sda1.
Enter the directory CD/storage/external _ storage/sda1,and then press enter to switch the directory to/storage/external _ storage/sda1.
Enter the command pm install dbzm.apk to install the third-party desktop to the set-top box.
Restart the box, wait a moment, and automatically enter the third-party desktop. Enter the setting menu and set the wired network connection mode to dhcp.
Method for set light cat management page
The LAN port is connected to the computer. According to the instructions on the back of the box, enter the box management address, enter the user name and password to enter the management page, close the dhcp server, and change the LAN port address to 192. 168. 1 (just different from the wireless router to be connected). Unplug the network cable from the computer and plug it into the LAN port of the wireless router, then restart the set-top box.
Automatically enter the third-party desktop after restarting, download the required software to the U disk on the computer, insert it into the USB port of the box, and install live broadcast software and on-demand software in the U disk. In this way, if you open the live broadcast software, you can watch live TV for free, and you can watch online videos and movies at will with the on-demand software.
To sum up, through the above operations, this idle and useless converged enterprise gateway can be transformed into a Netcom box, realizing free live TV viewing and free online video on demand. Summarize the implementation method, open the management page of Guangmao, close the dhcp server, and set the IP address as192.168.168.1(just different from the router to be accessed). The third-party desktop is installed in ttl mode when it is disassembled, and the software can be installed at will after it is automatically turned on, thus realizing live broadcast and free on-demand viewing.
You can directly open today's headline app and enter "TTL brushing tutorial" in the search box to learn more about brushing methods.
The above is the original of China Digital House, and the full text is first published. Reprinting without permission is prohibited. Reprinting will be investigated.