Single machine repeat printing generally needs to install sleeve, sleeve regulator and ribbon, and then make corresponding settings;
Install casing and casing regulator;
Put the housing regulator in a relaxed state, pass the housing through the housing regulator from right to left, and then put the housing and regulator into the machine. Pull out the front end of the housing about 6 cm, so that the front end of the housing exceeds the print head, and turn the knob of the housing adjuster to make it horizontal.
Installing sleeve and ribbon
Installation ribbon:
? Tighten the ribbon in the direction of the arrow on the ribbon box to flatten it; Make the print head in a relaxed state; Place the ribbon box at the position marked by the line numbering machine.
Cover the upper cover, plug in the power cord and start the machine.
Plug in the power cord and turn on the power.
1. How to set up single machine repeat printing?
(1) contents are different, and it is printed repeatedly.
After startup, the display screen will enter the material selection interface. After selecting "sleeve", press "Enter" and the screen will display "Please select the sleeve diameter". Description of selection: Select sleeve diameter, 0.5 square, 0.75 square and 1.0 square sleeves, all of which are1.0; 1.5 square, 2.5 square and 4.0 square pipes are all 4.0; 6.0 Square sleeve is selected as 6.0. Select the casing specification through the left and right arrow keys, and press the "enter" key to enter the document input interface, where you can enter the contents.
screen display
Enter letters, Chinese or match, for example, enter s, u, p, v, a, n once, and the screen will display: SUPVAN.
Press "Enter", the next paragraph will be generated automatically, and the screen will display: 2:
Enter the "line number machine" again, and the second line will print the contents as follows: line number machine, edit the contents you need in turn until the editing is finished, press the repeat key, directly input the number of times you need to repeat printing, and press "Print", the machine will automatically print out the input contents and automatically cut them in half; During printing, the LCD screen will display "Printing …". After printing, it will automatically return to the document input interface.
(2) The same content is repeatedly printed.
Shuofang line numbering machine comes with a keyboard with a "repeat" button. This function key is used to set the number of repetitions of a paragraph. The range of repetitions is 1-200 times, and the initial setting is 1 time. Duplicate means that all the document contents you selected are printed only once.
"repeat" key
After editing the content, press Enter, and the paragraph where the cursor is located and all subsequent paragraphs will print the number of times you entered repeatedly, and automatically return to the document input interface. Press the print button to repeat printing. The above is how to print repeatedly when the line number machine is offline;
How to print all the No.2 printers connected to the computer repeatedly?
First, open Master Fang official website, find "Program Download" in the lower right corner of the homepage, click the universal compression package on the PC side of Master Fang's computer, and click Download to install the software.
Download location
2. Open the Supvan editor, select TP numbering machine to select sleeve size in the print setting box, double-click the editing content in the blank, click the upper left corner to print after editing, and directly enter the number of times to repeat in the print setting, with the range of 1-200.
Edit software operation interface
Edit software operation interface
Computer-side form template import
When the computer creates a new form template, the first line of editing the form template must have a title, and the second line begins to input the printed content. After editing, the form is imported.
Table screenshot
2. Open the software Supvan editor, click Import Import Excel in the file in the upper left corner, find the table we edited, and double-click it to see the title just edited and the content corresponding to the title. (If you need to include a title when printing, we will check the following {Content includes a title when importing}), check the content to be printed, and then click Import. After the import is successful, we will adjust the font, font size and size.
Edit software operation interface
Edit software operation interface
3. After editing is successful, we will click on the content of the edit dialog box, and the printed content will change. If you shrink the edit box and click Print in the upper left corner, the Excel print range option will appear in the print settings. Fill in the serial number in the form, and then click the print button.
Edit software operation interface
Note: If you need to use the general editing software of the main control PC to set different copies of table contents, you can add a separate line of "copies" in Excel. After adding a value in the "number of copies" column as required (the number of copies can be different), the digital tube printer will automatically print according to different numbers of copies.