First, the application of string to accurately measure the ring mouth
1, there is no doubt whether the conformity of the ring mouth of the jade bracelet is based on the specification and model of the nominal diameter inside the bracelet, which can be solved at will by using the red rope measurement method. Cui You can fuse the thumb and the tail finger, and then use a red rope to bypass the palm from the highlight of the thumb, and you can get the size of your circle. Then, divide the length accurately measured by the red rope by 3. 14 to get the specifications and models, and then add 1 and one 1-2mm, which is your most suitable bracelet nominal diameter ring. To be clear, everyone's hobbies are different. Cui you who likes to be relaxed can add more points appropriately, and you don't need to like the right one. For example, if you accurately measure the individual length as 180mm, then the nominal diameter of your bracelet is180/3.14 (1-2). This practical technique can predict your approximate palm circle.
2. After accurate measurement with red rope is completed, it is very appropriate to measure the effect with a bracelet in the store. Before putting the jade bracelet in the palm of your hand, put the five fingers together to the palm, and then put the bracelet in the palm for a preliminary test. If you think the bracelet is small, but you can go in with it, this situation is that you think this is your best cycle. Because the bracelet will not be lost when swinging the elbow, it is best to choose a small straight warp specification for the bracelet. If the bracelet can't be obviously worn on the palm of your hand, it should be properly aligned.
3, a round mouth that can be combined with the length of the palm. The length is -28 cm, and the size and model of the bracelet are 62-65 mm; Length -25cm, matching bracelet specification-61mm; Length -22 cm, matching bracelet specifications-57 mm; Length-19 cm, matching bracelet specification-54mm; The length is-15cm, and the matching bracelet model is19-51mm; To be clear: if you buy a jade bracelet, you should add 1.5-2 cm more.
4. Through calculation, you can master your best specification and model range:
Line length: 6-9cm bracelet inner diameter 4.0-4.5cm line length:10-13cm bracelet inner diameter 4.6-4.8cm line length:13-15cm bracelet inner diameter 4.9-5. 1 cm.
Line length: 16- 19 cm bracelet inner diameter 5.2-5.4 cm line length: 20-22 cm bracelet inner diameter 5.5-5.7 cm line length: 23-25 cm bracelet inner diameter 5.8-6. 1 cm
Line length: 26-28cm. The inner diameter of the bracelet is 6.2-6.5cm Note: If it is oval (also called princess bracelet), the line looks redundant, so the line length should be increased by1.5-2cm. ..
Second, accurately measure the ring mouth of the jade bracelet with a scale.
Well, that's all I have to share with you in this issue. Thanks for your support. I'm Ying Fei. See you next time! # Fashion #