I'm a professional designer. I usually leave 1MM for my business card and 3MM for my picture book poster. Shooter ads are targeted.
Does it bleed to make a picture album or publicize three-fold pages? How much do you want?
Keep it. Keep it for about 3 mm
It is common sense that printing and typesetting should bleed (generally 3mm), otherwise binding will go wrong; The generation of cutting lines depends on typesetting software. Some will be generated automatically when the movie is output, and some need to be generated manually. In short, the output film must have a cutting line, otherwise it cannot be cut in a standard way. The printing process is complex and diverse. Don't expect to become a master in a few days. It is very important to lay a solid foundation, otherwise it may delay customers and lose your reputation.
How much bleeding should I leave when I use C9 as my business card?
The picture album and business card are 3mm, and whether the poster is printed or sprayed is different. None of them are right. To be exact, leave about 3 mm. That's right. I have been preprinting for 4 years. I am a professional designer.
How much bleeding should I leave when I use software to make brochures, leaflets and the like?
The printing size of A4 size publicity pages is 16, that is, 2 10*285mm, which cannot be directly established as A4 size. As for the problem of bleeding, some printing plants need to keep bleeding, and some printing plants don't need to keep bleeding. If bleeding is left, it is usually printed in 3 mm or so.
If you want to make a brochure with a height of 2 1cm and a width of 27cm, how much bleeding should PS design leave?
If the width of a single sheet of paper is 27cm, you should build a size of 27x2+0.6 (bleeding) x2 1+0.6. So we can design the left and right together. In addition to the front cover and back cover, it is the left and right pages inside. Just a piece of paper. If there is a lot of content, it is recommended to consider the page location. Folio pages are not necessarily connected. I'm a novice, too. I'm not sure. I don't understand. Just open a magazine.
How many bleeding spots should CorelDRAWX4 leave as my business card?
Generally, it is enough to leave 3mm for the width and length of the outer frame. Some printing companies will help you leave a bleeding spot before printing, so you don't have to worry about it yourself.
What's the difference between a poster and a 30% discount brochure? How come?
There's no need to search online. The simplest statement is: the role of posters is to let people know about the school for the first time, but it is not detailed, such as the slogan of the school or the best major of the school; Brochure is a more detailed division of the school, such as how many majors there are and how many award-winning achievements there are;
What size should business cards, picture books and brochures be designed?
Business cards are of a fixed size: 90-54 mm,
As for the brochure, you can customize it. The conventional ones are A4 and A5. Of course, it can also be customized. Major companies publicize their needs. How much is it to make brochures and picture books (color pages) 1p for the company?
The normal price is 50 p, which means that the content can float up and down. Pay attention to whether the post-printing can be displayed when designing.
How appropriate is the resolution setting of common posters? Do you want to add bleeding? Is it printed or printed? 1. Whether printing or printing, the resolution should be set to 300dpi2. 2. Bleeding should be added. 3. Whether to print or not depends on the quantity, usually batch print. Only a few can print ps designs. Do booths, posters and street signs need to leave blood lines? (Please explain in detail) Yes.
The bleeding line is mainly to make the printed picture exceed that line, and then even if there is a little deviation when cutting, the printed thing will not be scrapped. The position outside the bleeding line is the place to cut.
Bleeding in printing is specially used for each production process within its process tolerance to avoid cutting the white edge or cutting content of the finished product. Because the tool used to cut the printed matter is a mechanical tool, the cutting position is not very accurate. In order to solve the problem caused by inaccurate cutting, the general designer will add 2~4mm bleeding line around the cutting position of the picture.
Extended data:
In relief printing, the image part is raised, so that the ink pigment is dyed during printing, but the non-image part is lowered, so that the ink pigment is not dyed, and printing can be carried out. Letterpress printing also includes engraving, movable type, photography, reproduction and electronic letterpress printing.
The characteristic of letterpress printing is that when mistakes are found in the printing process, they can be corrected at any time, and the ink color is strong, which is suitable for large-scale printing or small-scale printing, so it is mostly used for printing books, newspapers, magazines, cards, stationery and so on.
Lithographic printers, with and without printed parts, keep the same height on the page. The printed part makes them absorb ink and repel water, and the non-printed part makes them absorb water and repel ink. Because water and fat can't be mixed, you can print.
Lithography can be divided into three categories: flat plate, intaglio plate and relief plate. Lithographic printing is characterized by fast plate making, large layout, convenient overprinting and low cost. Although its printing ability and expressive force are slightly lower than that of letterpress, it has the widest printing range, which can print books, newspapers and magazines, but ordinary pictures and color prints.
-Vent pipe
Find a corporate service and go to Pig Bajie. Com, delivery, acceptance and payment.