1. Aluminum-plastic plate as wall: paste aluminum-plastic plates with the same or different colors and specifications on the skeleton as wall. This skeleton can be made of wood, metal or brick mud structure. 2, acrylic wall: acrylic is the best plastic, outdoor for ten years does not fade. Therefore, it is best to choose the primary color acrylic board, so that a wall can last at least 20 years (indoors). Of course, the price of this material will be higher than that of aluminum-plastic board. The production method is the same as that of aluminum-plastic board, because acrylic board is relatively heavy, so it can't just be stuck on it. 3, glass wall: glass is transparent, and the wall that wants transparent effect is the first choice. Of course, glass can also be colored. Transparent effect requires less skeleton, firmness and beauty, so stainless steel or plastic steel is generally used. Most importantly, the glass must be tempered glass. Production technology of LOGO characters: LOGO characters include metal, acrylic, PVC, PP, wood and so on. Mainly the carving process. 1, metal characters: stainless steel is generally used (to reduce corrosion), LOGO characters are made by soldering process, and then wood lines are filled. , make the joint with the wall bigger. 2, acrylic, PVC, PP, wood and other words, mainly carving techniques, are generally made into two layers, one is the color layer, and the other is the thickness (three-dimensional).