With the development of society and the improvement of people's quality of life, video surveillance can not only be used for local monitoring at any time, but also for remote monitoring at any time. Today, let's introduce how to set up the remote monitoring of Shanghai Conway video recorder.

Methods/steps

1

Step 1: DVR related settings, and confirm whether the following points have been filled in.

Step 1: DVR related settings, and confirm whether the following points have been filled in.

Step 2: Port mapping (two configuration methods are provided below, one of which is enough).

1, UPnP automatic port mapping

Description:

One requirement of this setting is that the router should support UPnP, so please confirm whether the router you are using supports this function first. If UPnP is supported, you can refer to the following settings. If UPnP is not supported, please strictly follow the port mapping in point 2.

The operation steps are as follows:

Log in to the router configuration interface, turn on the UPnP function, enter the device local configuration interface, and enable UPn.

Refresh the port and see that the status is displayed as "valid".

2. Router port mapping

Log in to the configuration interface of the router and find the virtual server (or port mapping) and the mapped port (the device has three ports by default, namely 80, 8000 and 554, which can be modified on the device, and all three ports must be mapped at the same time.

If there are multiple monitoring devices on the same router, please use port numbers to distinguish them, and they cannot be reused.

Port.

Photo tutorial /jsfa/ 193.html