What is windows Remote Desktop Port 6?

First, the default Windows Remote Desktop port is.

Secondly, users can change the port of Windows Remote Desktop Service to any unoccupied TCP port by the following methods.

1. Run regedit and open the Registry Editor.

2. Open the registry key and change the value of PortNamber to the port number you want. Note that it is 10.

3. Open the registry key and change the value of port number to the required port number.

4. Log off or restart the host for the service configuration information to take effect.

Can tplink router be viewed remotely?

A: You can view the tplink router remotely. The default WEB management port of 1. router is 80. If you change the default WEB management port (for example, to 88), you must use the "IP address: port" method (for example, http:/192.438+068.1.88).

This feature needs to restart the router to take effect. If the router sets the virtual server to occupy port 80, it is necessary to change the management port to a port other than 80, and it is recommended that the port number be greater than 1024.

2. The default IP address of the remote WEB management router is 0.0.0.0. In this default state, all computers in the WAN cannot log on to the router to perform remote WEB management. If you change the default IP address of remote WEB management (for example, to 202.96. 12.8), only the specified IP address (for example, 202.96.65438+) is available in the WAN.

If the IP address of remote WEB management is set to 255.255.255.255, all computers in the WAN can log on to the router to perform remote WEB management.

Remote default port of ftp?

The default data port of FTP is 2 1.

FTP (file transfer) protocol proxy server commonly used port number: 2 1, others such as HTTP protocol proxy server commonly used port number: 80/8080/3128/8081/9080; SOCKS proxy protocol server public port number: 1080.

The port number used for http communication is 80smmp: the default port of mysql is the default port of 3306sql service. The default port of 3389tomcat is 8080windows, and the port number of the remote terminal is 3389oracle default port 152 1, 1526.

How does cetonos open the remote access server?

The default remote port 22 is open, so you can connect remotely normally by configuring the root password.

How does windows7 change the port?

How to change the port:

1. Click the Start menu in the lower left corner, select Run, and then we enter the shortcut command "regedit" to open the Registry Editor.

2. After opening the registry, we expand the key HKEY _ Local _ Machine System Current Control Settings to control the terminal server server WDTDTCP. There are many levels. Don't take it wrong.

3. After selecting the TCP key item, double-click the "PoPortNumber" item in the right window, which is the subitem for recording the remote port number. After opening, we select decimal, and the value d3d will become 3389. At this time, we will change it to 3396, or other values. The most important thing is not to conflict with other program ports.

4. We also need to change a location in the registry. Find the port number under the WDS key in the right window of WinstationsRDP-TCP and change it to 3396.

5. After all changes are completed, the default port of remote desktop in Win7 Ultimate will be changed.