Personal Work Summary of Work Safety 1
Over the past 20__ years, under the correct leadership of the company, closely around the company's overall work ideas and priorities, we have continuously improved the level of engineering supervision and put an end to major safety accidents. Taking the company's quality goal as the work goal, in line with the enterprise spirit of strict supervision, enthusiastic service, law-abiding justice and scientific integrity, after one year's efforts, I basically achieved this year's work goal. As a member of the supervision company, I now make the following summary report to the leaders on this year's work and study:
I. Summary of field work
1. Master the engineering design drawings in the process of the project, find out the difficulties in quality control, determine the control objectives, and consult the construction specifications and quality inspection standards of various disciplines in this project to meet the needs of this project. Review the qualification and scheme of professional construction units entering the site.
2. Pay attention to the inspection and acceptance of materials and components in the site, and require the construction unit to attach the factory certificate to the materials in the site, and report to the supervision department in time for appearance inspection and quality certificate review of the materials in the site, and sign the materials for approval. The contractor is required to immediately remove unqualified materials from the site and shall not use them. At the same time, in the process of supervision, the materials used are tracked and supervised to prevent the contractor from shoddy and stealing the column when using materials.
3. Conduct on-site supervision on concealed works and key parts, and require supervisors to make on-site supervision records. Strict requirements are put forward for the construction inspection procedures of contractors' sub-items, so as to avoid the disconnection between engineering entities and data and ensure the synchronization of construction progress and data. For the quality, safety and progress problems existing in the construction process, oral communication should be conducted first, then written inquiry and tracking should be conducted, and finally a special meeting should be held to solve them. Organize special meetings on professional quality, safety and progress, and coordinate relevant personnel on site to conduct safety inspection on the construction site every week.
4. Work closely with the construction unit, review the construction progress plan prepared by the construction unit in advance, and put forward opinions on the unreasonable process arrangement of the construction unit after consulting with the owner and obtaining the consent, and ask it to make reasonable adjustments to make the progress plan meet the actual engineering needs. Before the acceptance of each type of work by our supervision department and the owner, we must make a good example room, which can be spread out in a large area and form a written record at the same time. In the process of construction, we should be aware of the completion of each single project, and each project should be reported to the owner for confirmation in time.
Second, the shortcomings and suggestions
1. In the process of work, I found that my professional level, professional skills and knowledge are limited. For example:
A, the boundaries between some detail acceptance specifications and mandatory provisions are not clear.
B, at work, there are many verbal instructions to the construction unit.
C, insufficient communication with the construction party, etc. As a result, the supervision work is very passive. In the future work, the control of project progress should also start from the implementation scenario to avoid the disconnection between the progress and the entity.
D, at the same time, strengthen the study and accumulation of their own professional knowledge of safety production management to meet the needs of safety production.
2. It is suggested that the company can organize more experienced professionals to train our supervisors at an appropriate time to improve their professional level.
Third, the next work plan and experience
As a supervision engineer, I haven't been an engineer for a long time, and there are still many shortcomings in my work. In the future, I will be more strict with myself, study my business hard, constantly update and supplement new knowledge, improve my business level and work ability, sum up my experience and better complete the supervision work.
Summary of personal work safety II
In an instant, 20 years passed quickly. It has been two years since I was transferred from the inspector in the quality department to the manufacturing department. As an ordinary production manager, I keep telling myself, "study, study, and study again", pay attention to correcting the shortcomings in my work and obey the arrangements and instructions of the leaders. 20__ Year after year, he led all the staff in the second workshop to achieve the company's annual goal, always insisting on starting from me, regarding quality as the life of the enterprise and employees as the wealth of the enterprise. Looking back over the past 20 years, the summary is as follows:
First, arrange the plan reasonably to ensure that the production task is completed on time.
This year, the production plan of Xiaomi has not been very stable, and there are many temporary production plans, especially the external production of pole pieces. Due to the market demand, the production of polar plates is often arranged upon arrival, so it is difficult to ensure the timeliness of raw material inspection, and some new product documents are not very comprehensive, which brings great difficulties to the normal release of the plan. When issuing the plan, we must communicate with the departments of quality, technology and logistics. , and then arrange specific working hours for employees. According to their respective production capacity and the number of production auxiliary materials, reasonable arrangements are made between several working procedures to ensure that employees have something to do at work every day and to ensure that production tasks are completed on time.
Second, strengthen quality management and take practical and effective measures to improve product quality.
In March, the automatic separator was used to assemble the super-calcium polar plate, and the 10AH internal and external conversion polar plate used a small turnover box. The electrode plate produced by small machine grinding has been well received by welding process, and the grinding method has been improved by large machine grinding, and the frame is polished vertically. In March, a QC team was established, with the topic of "keeping the working efficiency unchanged and improving the polishing quality of electrode sheets". After several months of implementation, preliminary results have been achieved. In the assembly process, in order to improve the matching rate of the polar plate and ensure the timely circulation of the polar plate, the information is always fed back to the coating process at the first time, so as to adjust the coating weight in time. Due to June 10, the weight adjustment is relatively difficult. In order to avoid the long-term backlog of polar plates and speed up the circulation, we communicate with the on-site inspectors in time and feed back the quality information to ensure the smooth circulation of external plates during the assembly process. In order to improve the quality of film packaging, the reward and punishment regulations of film packaging process were formulated, and the operation methods of film packaging personnel were standardized. In addition, through post skill competition and knowledge competition, an atmosphere of competition, learning and catching up has been formed in the workshop. Through the continuous implementation of these quality improvement measures, no quality accident occurred. At present, the circulation speed of products is obviously accelerated and the quality is steadily improved.
Three, strengthen the construction of staff, improve the loyalty of employees to the enterprise.
The second workshop belongs to a special workshop in the whole company. The staff come from all over the country, with an average age and uneven quality, which adds great difficulty to the management of the workshop. To this end, I use the time before and after work to communicate with employees, publicize the double boarding culture and wolf culture, combine humanized and institutionalized management methods, adhere to people-oriented, start from small things, and pass the militarized queue training and comprehensive training for employees in the second quarter organized by the company everywhere. Due to the company's management policy of outsourcing small secrets, there is a surplus of personnel in the slicing and polishing process. By the end of the month, employees whose contracts have expired will be tracked by the General Department one by one. Among them, 20 employees canceled and renewed their contracts with the company without any disputes or mistakes.
Fourth, strengthen the management of saving costs and reducing consumption.
In the past, scraps and polar plates were often found in waste lead powder, which caused certain losses to the company. In order to stop this waste, we appointed the person in charge, formulated severe punishment measures and personally checked, and now it has finally been effectively controlled. In order to reduce the scrap rate of polar plate slicing, the number of staff and posts were fixed, and all polar plate slicing employees were evaluated. Unqualified employees were eliminated, equipment was refurbished, the backing of slicer was reduced, and the number of poles was specified. At the same time, the phenomena that affect the slicing effect, such as plate deformation and offset cutter, are communicated with the previous process in time, and the annual plate scrap rate is lower than the index set by the company. In order to reduce the power consumption, reasonably arrange the polishing operation shifts and ensure the utilization rate of dust removal facilities. Through the control of raw materials, it is found that there are quality problems in raw materials and actively communicate with the purchasing department. Anyone found to be wasting materials will be dealt with resolutely and seriously. The main raw material diaphragm of the second workshop has a surplus of about 3% per month.
Five, strengthen 5S, safety and occupational protection management.
The second workshop is the place where the company's lead dust pollution is the most serious, and it is difficult to implement occupational protection and 5S work. In view of the special environment, under the care of the leaders of the manufacturing department, the dust removal facilities were tracked, and the potential safety hazards were eliminated. Through the training of employees and the implementation of various assessment systems, employees' awareness of protection has changed from passive to active, and their awareness of safety has been strengthened. There is no phenomenon of entering the workshop without wearing a mask. The rod pulling plate is always supported by one person, and the operation is gradually standardized, which improves the physical and mental health of employees.
20 years is coming, and this is a new beginning for me. Although I have worked hard and diligently this year, I always feel too ordinary and lack of highlights:
First, we are still far from the company's high standards, and we still have a gap. We need to improve our standards in our future work and complete all the work with high quality.
Second, there is a lack of advanced consciousness and pioneering spirit in the work.
Third, we should strengthen the study of business theory knowledge, improve personal quality and improve our working ability.
In 20__ years, I will focus on the overall goal of the company, carry forward the spirit of seeking truth from facts, improve work efficiency, try to solve various contradictions in my work, be an excellent grass-roots manager in the company, be an excellent leader among employees, build a successful team, and make due contributions to the realization of the company's goals in the coming year.
Summary of personal safety production work 3
20__ years passed in tension and busyness. Looking back on the past year, I can't help feeling a lot. This year, although there was no vigorous victory, it was an extraordinary test and tempering. On the occasion of bidding farewell to the old and welcoming the new, our production department will make a detailed summary of the work and gains and losses in the past year and pray that our company will be better next year.
I. Production and output
In the past year, the production department bravely shouldered the heavy burden and carried out a large number of process exploration experiments. In stamping, the difficulties such as poor shape of raw materials, greatly improved customer quality standards, delayed arrival of raw materials and temporary adjustment of customer orders have been overcome. , so that our company's product production has achieved a successful transition from single product to synchronous production in previous years. Successfully completed tons, tons. Heat treatment: According to the customer's requirements, timely refer to the relevant experience of the same industry manufacturers, and boldly improve the traditional annealing process of our company. After a period of experiments, some newly exposed high-efficiency materials were treated, and the products basically met the requirements of customers, and the production department also summarized a lot of valuable experience. * * * Finished tons of heat treatment. New product: This machine is a new product developed by customers this year. In order to meet the requirements of customers in terms of output and quality, the production department has processed several tons of special products for customers in view of the difficulties such as untimely arrival of raw materials, messy product models, small demand for single products, unstable customer orders, frequent mold replacement, etc., and rationally adjusted the production plan, and used spare time to develop products for customers and complete small batch supply. It laid a good foundation for the diversification of the company's products in the future. As for the primary processing and external processing of materials, as of February 20th, 65438, * * * has completed __kg of materials.
Second, product quality.
While completing the above output, our manufacturing department also attaches great importance to product quality, strictly controls every quality link in the production process, and instills quality concepts into operators in time by means of regular meetings, quality meetings, pre-shift meetings, production processes, etc., and insists that operators are the first quality inspectors. According to the turnover of operators, arrange basic theoretical training and on-site operation practice for new employees in time to ensure that every new operator can understand the basic product quality discrimination method before operating independently on the computer. According to the classification characteristics and quality requirements of products, we arrange a part-time staff in the production department. We always believe that product quality is produced. As long as every employee in the production department has a high sense of quality and puts himself into every link of production and operation, the product quality will be steadily improved to meet the quality requirements of customers.
Third, equipment mold management.
This year, the company invested money to purchase more sophisticated molds and equipment, which provided a stronger guarantee for the output and quality of products, although most of the equipment was new and the failure rate was low. However, our equipment maintenance personnel overcame the difficulty of weak technical force, carried out regular maintenance of the equipment according to the relevant documents of equipment maintenance, and made corresponding records, detailed equipment checklist and mold maintenance records, and established detailed files for each set of molds, effectively ensuring the normal operation of the equipment and further ensuring the stability of production and operation to a great extent.
Fourth, personnel management.
Due to the sharp increase of production tasks and the diversification of product models, the company recruited a large number of new employees. * * * There are many batches of new employees entering various production positions in the workshop, and the turnover of personnel is very large, which brings great pressure to the management of all aspects of production. Under such pressure, under the correct guidance of the foreman and leaders at all levels, the production department firmly conducts simple pre-job training for each position to ensure that new employees can smoothly enter the post role.
Verb (abbreviation of verb) safe production
Over the past year, based on the particularity of the industry, our production department has incorporated safety production into daily management, and can often educate employees in various positions on safety knowledge, train operators to operate production equipment correctly, and handle problems in time when found. However, on May 4th, June 8th and June 28th of 10, vicious personal injury accidents still occurred due to violation of operating procedures. In view of such incidents, the production department has conducted more frequent safety warning education for all gymnasts. Serious economic punishment and criticism and warning were given to some people and things that may cause personal injury or damage to equipment and molds.
Summary of personal safety production work 4
Under the leadership of the street Party Working Committee, with the strong guidance and help of the superior business departments, and with the joint efforts of the members of the street safety production leading group and the comrades engaged in safety production in the whole street, the overall situation of safety production in the whole street is relatively stable. Now make the following self-summary:
First, strengthen the network and implement responsibilities.
1. The street safety production leading group was adjusted in time, and the whole street safety production management network was further improved. On the basis of extending the safety mechanism to village guidance sub-centers, enterprises and markets with more than 10,000 yuan last year, this year, the safety mechanism will be extended to villages (communities) and enterprises again, and the village (residential) safety leading group will be established, making it clear that the top leaders of enterprises at all levels are the first responsible persons for production safety, so as to ensure the smooth work order of production safety.
2, improve the responsibility system for production safety, street offices, management office; The management office, office, village, enterprise and community have signed * * * copies of the responsibility book for comprehensive production safety objectives. The assessment method of target responsibility system for street safety production management was improved, and safety production was linked with cadre assessment, which really guaranteed the organization of safety production work and strengthened the responsibility system for safety production.
Second, carry out in-depth special rectification work
In addition to organizing regular inspections every month, it also carried out internal inspections, issued rectification instructions, twice carried out "three-in-one" major inspections of hidden enterprises, and cooperated with the safety inspections of higher authorities for many times, and successively organized and carried out:
1, safety inspection, organized many inspections for "three-in-one" enterprises. In the key investigation at the end of June and the beginning of July, * * * visited more than 200 enterprises and issued a rectification book within a time limit.
2, the implementation of the provisions of the regional management of the market for hazardous chemicals business households, to carry out law enforcement inspection of hazardous chemicals business households still operating in the city, and to carry out special rectification activities of hazardous chemicals.
3. Special rectification of fire safety in the market was carried out. From early May to mid-June, the fire exits in the market (mainly Zhuji small commodity market) were cleaned up, and fire-fighting facilities were added, which effectively improved the market safety.
4. Carry out safety inspection and major accident hidden danger investigation and rectification. (From the end of April to mid-May, from the end of June to mid-July), the street held a mobilization meeting attended by all government officials, responsible persons of affiliated enterprises, administrative village secretaries, directors and community cadres. A carpet investigation of the enterprises belonging to the street found that there are "three in one" enterprises and enterprises with potential safety hazards (including self-employed households without business licenses). After many door-to-door persuasion, the fire exits in workshops, fire extinguishers in staff quarters, gas stoves and other phenomena have been initially solved. Some enterprises' staff dormitories are being relocated, but most of them have not yet moved. In the process of persuasion, a better way is to hold a forum attended by the landlord, the person in charge of the enterprise and the street management office. After the symposium, many enterprises actively cooperated with the inspection and rectification work.
Third, strive to explore a long-term mechanism.
1. Establish and improve enterprise safety rules and regulations, and improve enterprise safety software and hardware facilities.
2, pay attention to the construction of village (neighborhood) security personnel, organize street village (neighborhood) personnel to participate in the ji yang street village (neighborhood) and community safety supervisor training organized by the Municipal Safety Supervision Bureau.
Fourth, strengthen publicity, education and training.
1, combined with the national "Safe Production Month Activity", seriously carry out the publicity and education activities of organizing Safe Production Month, hang 30 "Safe Production" banners in the publicity windows of communities and offices, and post the cover of safety publicity wall newspapers; Organize safety production publicity activities signed by ten thousand people in the city square, and distribute more than 200 copies of publicity materials/kloc-0.
2, strengthen professional skills training, actively organize enterprise electricians, welders, rock drills, underground workers, mine managers, hazardous chemicals management personnel and employees and other special types of workers and 1 10,000 enterprise leaders and safety officers to participate in the training courses organized by the Municipal Safety Supervision Bureau. Carry out safety training for all employees of the enterprise, and train 1.500 people again on the basis of training 1.500 people last year, which has improved the safety awareness and self-protection ability of enterprise owners and employees.
Problems with verbs (abbreviation of verb)
1. In the inspection of "three-in-one" enterprises, it is found that both landlords and employees live in residential houses, forming family-run enterprises, and most of them have no business licenses (such as Xin 'an Jiayuan Community), which makes it difficult to completely rectify.
2. The main body of the "three-in-one" enterprise rectification work is township streets, but in the rectification process, it needs to involve safety supervision, fire protection, industry and commerce, public security and other departments. And there are some difficulties in the process of deploying various forces, lacking the ability of overall planning and coordination.
3. It is difficult to rectify the hidden dangers of the homemade freight elevator found in the inspection.
This street has a special location, and many industries (such as architecture, beauty salons, shopping malls, etc. ) The jurisdiction is unknown, so the street is under great pressure.
Summary of personal safety production work 5
In 20__, our company undertook * * * projects, including _ _ New Year's Eve projects and _ _ new projects. Under the correct leadership of the superior departments and the company, the Ministry of Safety adheres to the safety production policy of "safety first, prevention first and comprehensive treatment", improves the company's various safety management systems, standardizes and unifies the management of safety data on the construction site, and regularly carries out safety production inspection activities. By strengthening the management of construction safety production, perfecting and implementing a series of safety management measures, and strengthening the supervision of various project departments, all the work has achieved certain results.
First, based on publicity and education, improve the safety awareness of all employees.
1. The activity rate of "three-level safety education" was100% when the project started and resumed; In order to further strengthen the management of production safety, the Safety Department will focus on checking and urging each employee to carry out "three-level safety education" in time, intensify the inspection of certificates, professional knowledge training and examinations for special types of work, and check the implementation of safety technical disclosure by various project departments.
2. Actively organize and carry out safety production publicity activities. At the beginning of this year's safety production month, the Ministry of Security called full-time safety officers of subordinate project departments to make work arrangements and put forward requirements, requiring all project departments to hang large-scale safety production slogans in a prominent position on the construction site to strengthen the safety education of employees in the safety production month. Through these organizational education work, the safety awareness of all employees in the company has been greatly strengthened.
The second is to strengthen the safety production inspection to ensure the smooth progress of the company's safety production work.
1. This year, on the basis of weekly safety inspection, the Safety Production Department has successively carried out special safety inspections such as scaffolding engineering, safety of large machinery, preventing objects from hitting, preventing falling from heights, temporary power consumption, and safety data management.
2. Up to now, the Department of Safety has carried out more than _ _ inspections this year, and urged all project departments to check hidden dangers for more than _ _ times. The inspection contents include safety production, civilized construction, certificates for special types of work, safety data management, etc. of all construction sites under construction.
3. Through regular inspection and targeted inspection, the safety management level of our company has been improved to a certain extent, and the occurrence of safety accidents has been effectively prevented and curbed. The Ministry of Security also requires all project departments to be strict with subordinate construction teams and strictly implement the reward and punishment system.
Three, improve the safety production responsibility system and target management system.
At the beginning of its establishment, the safety supervision department formulated the company's safety production responsibility system and safety management objectives, requiring all project departments to decompose and formulate the safety management objectives of each project department in combination with the company's responsibility system and management objectives, and improve the project safety production responsibility system; And the company's safety management system, issued to the project department for future reference.
Four, 20__ years of work achievements and difficulties.
The effectiveness of the work has been reflected in the above aspects, so I won't say much. This year, our department is bent on doing a good job in safety production, but there are still problems in implementing safety production. In view of this situation, we summarized and analyzed, and the main reasons for the difficulty in implementing safety production work are:
1, the project department's division of labor in safety management is not clear, which is a common reason. All the management personnel in the project department think that as long as safety is involved, it should be managed by safety officers, and there is no clear division of labor according to the principle of "managing production must manage safety".
2. Because the dynamic security risks exist every day and constantly change, the safety officer is inert in rectifying the hidden dangers on site, just to cope with the inspection of the company and the higher authorities in some aspects.
3. The quality of building grass-roots personnel is low, and their ideas are poor.
4. Some aspects of the company are in a sound stage and can't really put safety first, which leads to unqualified materials or untimely supply, insufficient manpower and untimely funds. To sum up, the company's safety production work is difficult to implement.
Five, 20__ year safety work priorities.
1 and 20__, the safety department will continue to make efforts to set the annual safety management objectives according to the company's requirements, and determine the development and management of all work according to the management objectives to ensure that no major casualties occur throughout the year.
2, strengthen the safety management of production safety leading group, the project department to strengthen the safety management of the construction site, to ensure that no safety accidents.
3, strengthen safety education, strengthen the guidance for workers to learn and implement operating procedures.
4, increase the management of machinery and equipment, who do not show certificates once found, immediately stop the operation, change people within a time limit, and give economic penalties in accordance with the provisions.
5. Strengthen the prevention and inspection of falling from a height and objects hitting the construction site, and do a good job of safety protection in strict accordance with the standards.
6, pay close attention to safety education and special type of work related certificates, regular safety education for construction personnel on the construction site, strengthen and consolidate the safety awareness of employees.
7, earnestly do a good job of on-site inspection, inspection principle is found that the problem, rectification within a time limit, due to review, overdue punishment, for violation of mandatory provisions or potential safety hazards, shall be ordered to stop work for rectification.
8. Strengthen corporate image management. Each project represents the corporate image and reflects the management level of the company. Therefore, the security department will cooperate with all departments of the company in the next year's work, requiring all project departments to do a good job seriously and make aspects that can reflect the corporate culture and image.
The year of 20__ is coming to an end, but the work of safety in production is a long-term work, and the company leaders attach great importance to it. No matter in the past or now, the company has invested a lot of energy, manpower and financial resources in safety issues. The company's security department will take 20__ as a new starting point, further strengthen the management of safety work, strengthen the supervision of safety production, strictly implement various systems, push safety work to a higher level, and further create a good safety environment for the company's production and construction.
Summary of personal work in production safety five related articles:
★ 5 personal safety production work summary.
★ 2020: 5 model articles summarizing personal work in production safety.
★ Personal safety production work summary 5 selected articles
★ There are 5 model articles of personal work summary report on safety production.
★ Four Summaries of Personal Work Safety
★ 5 copies of personal annual work summary of safety officer.
★ The year-end personal work summary of five selected safety officers.
★ Five selected personal annual work summaries of safety officers.
★ Five excellent model essays are summarized for personal work of safety officers.
★ Summary of personal safety production work