Malone's serve is mainly topspin and backspin on the side of the small triangle in forehand position, and the landing point changes greatly. The following is the introduction of the bottom plate of Malone table tennis bat. Welcome to read and browse.
Introduction of table tennis bat used by Malone: Nita Gumu guitar
It is said that Malone, who just debuted, also used the legendary table tennis table like OC in Stica. However, in the early days, what impressed the fans most was that Malone used the Nitagu guitar table tennis bat. During this period, Malone's playing style was obviously not as intense as it is now, but his swing style was clearly reflected. At that time, the national table tennis was the loudest when it shouted the slogan "Forehand wins the world". Malone can occupy a place in table tennis with a good hand, which shows his profound basic skills. If we want to say how fast this wooden guitar table tennis bat can help Malone further improve the absolute speed, it can only be said that it is illusory, because the pure wooden structure has an acoustic guitar with a non-hardwood surface material, and speed is not a strong point. The carbon of the guitar produced in the later stage is still not as good as that of the hardwood seven clips. But why did Malone choose the wooden guitar floor to use? From the chronological point of view, pure wood still occupied the mainstream of table tennis at that time, so in terms of absolute quality, wooden guitars did not show weakness. At the same time, in performance, acoustic guitar is a table tennis bat equipment that can be called "dream touch the ball", and its good sense of control when touching the ball is of great help to Malone's quick connection hit rate.
Introduction to the bottom plate of table tennis bat used by Malone: butterfly Bohr spirit
This era of butterfly Bohr spirit table tennis bat shines brilliantly, which is an era when inorganic glue has just been implemented and 40mm balls have been completely innovated. In Bohr's hand, its configuration is double-sided SRIVER, and in Malone's hand, it is replaced by a hard forehand sponge familiar to Chinese people. The very versatile performance also makes this table tennis bat bottom plate, commonly known as "Old Boer", still in service in the hands of many golfers. The bottom plate of this table tennis bat is much stronger than an acoustic guitar. However, judging from the arrangement of members of butterfly's ALC camp, it is very biased towards a pure wood feel, and the playing feel is very "solid", especially the stability when the defense dominates, which also increases Malone's confidence for many rounds. The strength element is not prominent on this substrate, and it is easier to experience its excellent rotation with this substrate, which further enhances the fault tolerance. Another point that needs special emphasis is that the handle of table tennis bat is more round than some later ALC table tennis bats, so it is not practical to hold it in your hand. Malone's transfer from the pure wooden structure to this table tennis bat can also strengthen the quality and the threat ability of the veneer in the round at the same time of fast pace.
Introduction of table tennis bat used by Malone: Butterfly Bohr ALC
Observing the change of Malone's ball style, we can see that the board breaking speed of Bohr ALC belongs to the series of Bohr's sword and is faster than that of Bohr's spirit. Judging from the arc of hitting the ball, his playing style is more grim. Among the three, rotation, strength and speed are dominant, and the ball-holding ability of this table tennis board is not as good as Bohr's spirit. This is also the reason why many fans think that Pol ALC is not as good as T05 with arrogant forehand cooperation. Using a hard sponge to match this floor requires a better level. Observing Malone's hitting at this time, his strength level has improved more obviously than in the past, and he can also see Malone marking people actively instead of blindly carrying his opponent to death with his backhand. On the other hand, it also explains the purpose of professional players to replace the bottom plate. One is to strengthen their own advantages and match their own style of table tennis bats, and the other is to make up for their own shortcomings. The more professional players change boards, there is only one reason. After all, this is the most basic requirement for those who can board the world stage without obvious loopholes.
Introduction of table tennis bat used by Malone: Double Happiness, Jiaolong 5.
What really makes people feel that Malone has become a thousand enemies is that after Malone used this double happiness whirlwind dragon 5, Wang Hao used the built-in optical fiber, and Wang Liqin also used it at the end of his career. The built-in fiber soleplate produced by Shuangxi became an instant hit, but because of this Cyclone Dragon 5, Malone returned from the external fiber structure to the built-in fiber that is more inclined to pure wood impact. The elongated handle of this table tennis bat enhances the whipping effect of Malone when he swings. Built-in optical fiber was extremely rich in structure when COSCO Taiwan Province was deadlocked, and it became the looper with Malone. When Malone's connection is fast enough, strengthening veneer quality becomes the most urgent problem to be solved. Although Malone's connection is fast, his own strength movement structure is not small, which is a representative of stretching movements. In this way, the storm dragon 5 can be fully deformed under the long-distance power, and at the same time, it feels comfortable and has high fault tolerance under the medium power of the storm dragon 5.
Table tennis size introduction
Table tennis has a diameter of 40mm and a weight of 2.7g. ..
Table tennis originated in England. /kloc-At the end of 0/9, tennis was all the rage in Europe. However, due to the limitation of venue and weather, some college students in Britain move tennis indoors, using the dining table as a table, books as a net, parchment as a racket and playing around the dining table. 1890, several British naval officers stationed in India came across that playing tennis on a small table was quite exciting. Later, they replaced solid balls with solid rubber, then changed them into hollow plastic balls, and replaced rackets with wooden boards, thus playing this novel "tennis match" on the table.
The "small ball" became a "big ball"
In the early 1980s, after the China team won seven championships in the 36th World Table Tennis Championships, some people put forward the suggestion of increasing table tennis and nets, but this suggestion didn't get people's attention.
Since then, the technology of table tennis has been developing continuously, and the ball speed is getting faster and faster, and the rotation is getting stronger and stronger. Many athletes have fewer rounds against each other; Sometimes the ball flies like lightning before the audience can see it clearly, and the outcome has been decided, which weakens the interest of table tennis fans. Therefore, Ichiro Okimura, former president of ITTF, once considered increasing table tennis events. As the president of ITTF, Xu Yinsheng put this matter on the agenda.
1in may, 1996, ITTF parliament agreed to the proposal of testing big balls-in order to slow down the speed and rotation of the ball and increase the roundness and appreciation, it is suggested to increase the diameter of table tennis by two millimeters. ITTF is going to do an experiment in the youth championship in Japan next year, but Japanese manufacturers gave up because of too much opinion. At that time, I just suggested changing a big ball. In order to produce big balls, manufacturers need to invest money to remake molds and adjust the process. If the proposal is finally rejected, the money will be wasted.
In order to support the reform of table tennis, Shanghai Double Happiness Table Tennis Group resolutely undertook the trial-production task, and produced a number of high-quality big balls as required, which were sent to member associations for trial use by ITTF. The only table tennis association in the world that has instruments to measure the speed and rotation of dynamic table tennis has taken the initiative to undertake the testing work. Researchers from the Scientific Committee of the Chinese Table Tennis Association made an experiment on the influence of table tennis with different diameters and weights on hitting speed and rotation. The experimental conclusions are as follows: the ball with large diameter is slower than the ball with small diameter, and the rotation is weaker than the ball with small diameter; For balls with the same diameter, a ball with large weight and elasticity is faster and more powerful than a ball with small weight and elasticity.
1997 During the 44th World Table Tennis Championships, the first big ball test was conducted, but it had little impact. 1in the spring of 998, the second experiment was conducted in the Suzhou international table tennis "big ball" competition proposed by Xu Yinsheng. The Chinese Table Tennis Association took the initiative to undertake the funding for the Suzhou trials. 1999, another international competition was held in Copenhagen, Denmark, using big balls.
1999 At the ITTF Congress held during the 45th World Table Tennis Championships in Dawei, the proposal of "Big Ball Reform" was shelved because it did not get a three-quarters majority. Of the members of 124, 84 voted for it, 30 opposed it, and 10 abstained. Shalala, then the new president of ITTF, said that some delegates abstained or voted against the reform because they didn't understand the impact of the reform, and he would explain and convince them.
On February 23rd, 2000, ITTF Special Meeting and Congress adopted the reform plan of 40mm big ball in Kuala Lumpur, and decided to replace 38mm small ball with a big ball with a diameter of 40mm and a weight of 2.7g from June 65438+ 10/,that is, after the Sydney Olympic Games.
In addition, the table tennis reform also includes "replacing' 21'with'1'"and "open serve".
Introduction of table tennis table
Length: 2740mm (2.74m)
Width:1525mm (1.525m)
Height: 760mm (0.76m)
Clear height:1525mm (1.525m)
Note: The clear height here refers to the distance between the net and the ground, while the distance between the table and the ground is 0.76m, the net length is1.83m, and the net height is 0.1.525m.. ..
Table tennis table tennis net device:
(1) The net device comprises a net, a net hanging rope, a net post and a fixture component for fixing them on a table;
(2) The net should be hung on a rope, and both ends of the rope should be tied to an upright net column with a height of15.25cm, and the distance from the outer edge of the net column to the outer edge of the sideline is15.25cm;
(3) The distance from the top of the whole net to the playing table15.25 cm;
(4) The bottom edge of the whole net is as close to the table as possible, and both ends are as close to the net column as possible.
(5) Draw white lines with a width of 0.02m on the four sides of the table, and there is a middle line with a width of 0.003m parallel to the long side of the ball in the middle of the table.
Introduction of table tennis facilities
Competition table
(1) The left and right half areas are also called 1/2 areas, and their direction is the batter himself.
(2) Near-net area refers to the area within 40 cm from the net.
(3) The bottom line area refers to the area within 30 cm from the end line.
(4) The middle area refers to the area between the near net area and the bottom line area.
(5) The boundary area refers to the area near the edge of the table.
Racket shape
Racket shape includes racket face angle, racket transverse degree and racket face direction.
(1) racket face angle: the angle formed by the racket face and the table top.
(1) The racket face is perpendicular to the table.
(2) The angle between the racket face and the desktop is less than 90 degrees.
(3) The angle between the racket face and the desktop is greater than 90 degrees.
(2) Racket crossing: the angle change of the racket caused by the back and forth rotation of the racket.
When the racket handle is perpendicular to the end line of the table, it is 0, and the left transverse angle increases as the racket rotates around the front and rear axes. When the handle is parallel to the end line, turn 90 degrees to the left; When the racket turns right in the front and back axial direction to be parallel to the end line of the table, it is a right angle of 90 degrees. Usually the racket is semi-horizontal, that is, it is 45 degrees horizontal.
(3) racket face direction: the angle formed by the racket and the end line of the table when it is deflected left and right.
Hitting route
The hitting route refers to the line formed from the hitting point to the landing point. The five basic lines (based on the batter) are: forehand diagonal line, forehand straight line, sideways diagonal line, sideways straight line and middle straight line. The straight ball in the middle is always determined by the position in the actual game, that is, chasing the ball, also called chasing the road in the middle.
Hitting point
The hitting point refers to the spatial position where the racket touches the ball at the moment of hitting the ball, which is related to the relative position of the batter, including the following three factors: ① the position of the ball in the front and back of the body; ② the distance between the ball and the body; ③ The position of the ball.
;