Question 2: Is it good to arrange a skull bed? Compared with the traditional bed, the ribs bed has the following advantages: 1. The skeleton is more in line with the principle of human mechanics. 2. The air permeability of skeleton bed is better than that of wooden bed board. 3. The stress range of the skeleton bed is wider and the stress is dispersed. 4. The ribs used normally bear 350-400kg, which is larger than the wooden bed board.
Question 3: Which is better, a bed board or a bed with a skeleton? Mainly depends on what kind of mattress you want to put: if you want to put it thinner, choose the bed board; If you put a thick cushion, anything will do; Bones are more elastic. Its load-bearing capacity is 40 kilograms, and after being put on the mattress, the force is even. In contrast, it can also disperse the pressure of the mattress and prolong the service life of the mattress, so don't worry.
Question 4: The difference between skeleton bed and high box bed. Only thick mattresses, high-box beds, or thin mattresses can be used. Storage space, high boxes can be higher than ribs 10 cm, not much difference. Ribs are cheaper, so I think so much for the time being.
Question 5: Which is better, the skeleton or the bed board? Comparison between skeleton and bedplate;
The row skeleton is used to support the mattress just like the bed board, but there are obvious differences.
1, the skeleton row was invented by a German engineer, which conforms to the principle of ergonomics, and the bed with skeleton row is very comfortable to sleep in; The bed board is flat, and after using for a period of time, the place with large stress will obviously sink, causing sleep fatigue;
2. The processing technology of ribs is complicated and the quality requirements are high. Ikea, a world-famous home furnishing company, has even formulated a set of standards and testing methods to ensure the reliability of ribs. There is no standard for ordinary bed boards in the market, and each family has its own specifications. After the product has problems, it can only be replaced as a whole;
3. The skeleton is made at high temperature and high pressure, and the surface is treated with moisture, which will not be moldy and deformed, and will rebound quickly even if it is pressed for a long time; However, the surface of the bed board has not been treated, and the wood itself has strong water absorption, which is easy to bend, deform, be eaten by insects and be moldy.
Question 6: Anxiety! Is the skeleton of this solid wood bed good or not? 50 points. This kind of bed has the best skeleton, quiet ventilation, solid structure and environmental protection. Never use that flat bed.
Question 7: Is it better to use a mattress or a bed board? I have a bed board at home. I suggest you buy one. Generally, boards have storage functions. Bed board is more comfortable for human body, but it is really easy to break down, especially one side is biased. I suggest that if you buy a bed board, you can sleep somewhere else from time to time.
Question 8: How about arranging a skull bed? The utility model relates to a sparerib bedstead, which consists of a bedstead steel frame and bed legs, wherein the bedstead steel frame is formed by splicing the A side and the B side of the bedstead steel frame, the middle of the bedstead steel frame is provided with a middle bed leg, and the outer four corners of the bedstead steel frame are provided with peripheral bed legs; A side of the steel frame of the bedstead is a frame, two corners on the right side of the frame are circular arcs, reinforcing strips are fixed in the circular arcs, and the reinforcing strips are provided with holes; Two earrings are fixed on the inner side of the left frame of the frame, and there is a hole in the earrings; B side of the steel frame of the bedstead is a frame, two earrings are fixed on the inner side of the right frame of the frame, and the earrings are provided with a hole; The left two corners of the frame are circular arcs, reinforcing strips are fixed in the circular arcs, and holes are arranged on the reinforcing strips; The middle bed leg is a supporting body, the upper end face of the supporting body is fixed with a flat plate, and two ends of the flat plate are respectively provided with a hole; The peripheral bed legs are support bodies, and the upper end face of the support body is provided with threaded holes. The sparerib bedstead has light structure, saves transportation cost and is not easy to be extruded and deformed.
A sparerib bedstead consists of a bedstead steel frame and bed legs, and is characterized in that the sparerib bedstead is formed by splicing a bedstead steel frame edge A and a bedstead steel frame edge B, a middle bedstead leg is arranged in the middle of the bedstead steel frame, and peripheral bedstead legs are arranged at the outer four corners of the bedstead steel frame; A side of the steel frame of the bedstead is a frame, a strip is fixed in the frame, the right corner of the frame is an arc, a reinforcing strip is fixed in the arc, and the reinforcing strip is provided with holes; Two earrings are fixed on the inner side of the left frame of the frame, and there is a hole in the earrings; B side of the steel frame of the bedstead is a frame, and a strip is fixedly arranged in the frame; two earrings are fixedly arranged on the inner side of the right frame of the frame, and the earrings are provided with holes; the left two corners of the frame are circular arcs; reinforcing strips are fixedly arranged in the circular arcs, and the reinforcing strips are provided with holes; The middle bed leg is a supporting body, the upper end face of the supporting body is fixed with a flat plate, and two ends of the flat plate are respectively provided with a hole; The peripheral bed legs (4) are support bodies, and the upper end face of the support body is provided with threaded holes.
Dongguan Haoyuan Furniture Hardware Co., Ltd. is a professional manufacturer of sparerib beds, sparerib bedsteads, sparerib bed accessories, sparerib bed styles and ribs. Folding bedstead; Pneumatic bedstead; Electric bedstead; Metal bedstead; Ribbed strip; Rib cover; Skeleton fittings; Electric bed; Sofabed rack; Furniture fittings; Furniture fittings; Electric row skeleton; Electric bedstead; Furniture hardware; Accessories of furniture fittings; A manufacturer of wrought iron furniture with folding beds. Seek development by quality, survival by service and development by kindness.
Professional pickling and phosphating treatment
Our equipment is completely environment-friendly, and the pickling sewage can be used to raise fish after environmental protection treatment. Our spraying is an automatic assembly line, which has better firmness, better bonding rate, bright color and longer service life than ordinary spraying. The formaldehyde emission of all our ribs has reached the European E 1 standard.
. Common specifications of single bed are 900* 1800, 1000* 1900.
, double bed 1200* 1900,1500 *19001500 * 2000,1540 * 20401. 20401840 * 21401990 * 20401940 * 2040 (two rows) 2000*2020
By analogy, various sizes can be customized according to customer requirements, and matching ribs can be selected: craft wood, poplar, birch, beech, sticker, embossing, etc. , skeleton pipe is
30*30* 1.030*30* 1.2
Square tube
Our slogan: place orders, make friends, develop a group of customers and establish credibility.
Dongguan haoyuan furniture hardware co., ltd
Question 9: Is the MDF used as row skeleton strong? Structural characteristics and principle of use of MB908 bedstead: \ r \ The fabric is made of natural leather or environmental protection leather, and the frame is made of environmental protection MDF, which has been treated with anti-corrosion and moth-proofing. The bedstead is firm and stable, making full use of the space, forming an air convection area, and keeping the sleeping environment dry and clean. \ r \ Main performance: safety, compression resistance and comfort. The formaldehyde emission is ≤ 1.5mg\/L, and the mechanical properties meet the requirements of national standards. \ r \ Main parameters: The maximum bearing capacity of the bottom plate is 350-400 kg in normal use; \ r \ nThe normal bent can bear 350-400kg. \ r \ Scope of application: Please use it at room temperature. \r\n\r\nMB908 mattress structure features and principle of use: \r\nDouble-layer independent drum-type pocket spring is adopted to form point elasticity and release pressure independently and layer by layer. \ r \ Main performance: safety, compression resistance and comfort. \ r \ Main parameters: The spring has passed 90,000 withstand voltage tests and meets the standard requirements. The mattress completely fits the human body and conforms to the ergonomic principle.
Question 10: A bed is necessary. The binding board has a skeleton. Is the mattress strong on it? Stronger. Now it's basically a bed with a skeleton.