It is very important to formulate the company's safety management system. The safety of the company is not only reflected in the work, but also in the handling of various details, each of which is very important. Zhong Da Consulting will introduce you to the development of its safety management system.

Chapter I General Provisions

Article 1 In order to do a good job in safety work, ensure the completion of safety work objectives, and benefit from safety, this method is formulated according to the instruction spirit of the Safety Work Management Measures of the Ministry of Security of our company and the actual situation of our department.

Article 2 The main tasks of safety management are to conscientiously implement the principles and policies of the Party and the State on safety in production, implement the spirit of the documents on safety in production at higher levels, establish and improve safety management institutions, ensure safety in production, put an end to major and extraordinarily serious safety accidents, and minimize general accidents.

Article 3 All units should be highly responsible to the Party and the country, stand at the political height of maintaining stability and promoting development, adhere to the principle that safety must be paid attention to when grasping production, strengthen management, be strict with requirements, focus on the overall situation, start with small things, strictly grasp the narrow tube, sound the alarm bell, persevere, and strive to create a good safe production environment.

Chapter II Organizational Structure and Responsibilities

Article 4 A safety production committee is established, which is the management organization responsible for the whole section of safety production, and is responsible for the planning, arrangement, inspection, summary, appraisal and commendation of the whole section of safety work. The section chief is in charge, the party branch secretary is in charge, and the trade union is responsible for the specific work.

Fifth grass-roots units should set up safety work leading groups at all levels, responsible for the safety management of their own units, and have the right to lead, supervise, inspect, summarize and commend the safety work of their own units.

Article 6 In accordance with the principle of "production must pay attention to safety", leaders at all levels, functional departments and safety management personnel should have a clear responsibility system for safety posts, so that all levels have responsibilities and everyone is in charge, and the division of labor is not divided, and joint efforts should be made.

Article 7 The main tasks of security organizations at all levels are:

1, to convey and implement the policies, regulations and rules on production safety issued by superiors.

2, formulate the annual work plan and key points of production safety.

3, combined with the actual situation of the unit and the emergence of new situations, formulate, modify and improve the safety production rules and regulations.

4. Supervise and inspect the implementation of safety systems and measures and the preparation of safety production infrastructure.

5. Be responsible for the handling, statistics and reporting of accidents in this unit.

6. Be responsible for the publicity and education of this unit and the safety technical training of employees.

7. Organize a safety analysis meeting, analyze and study the safety situation, and summarize and commend advanced units and individuals in production safety.

Article 8 The main tasks of the safety officers of each unit are:

8. Pay special attention to the implementation of specific laws, regulations and rules on production safety and the relevant provisions on production safety formulated by this unit.

9. Responsible for uploading and issuing relevant safety production documents, and implementing the spirit of holding safety work meetings by leaders at all levels.

10, responsible for drafting the annual work plan for safety production, summarizing all kinds of information on safety production, and planning indoor construction standards.

1 1, responsible for daily safety production management and organizing employees to actively carry out various beneficial safety production activities.

12, responsible for the cultivation and publicity of advanced models, increase visibility and transparency, and give full play to the typical role.

13, responsible for guiding grass-roots work safety, extensively collecting and listening to the opinions of the masses, and being a good staff and assistant to the leaders.

14. Assist the leader in handling the accidents, statistics and reports of the unit.

15, have the right to stop and report to the superior orders and arrangements that are not conducive to safe production. In the production process, the safety officer has the right to stop the phenomenon and behavior that violates the operating procedures.

Chapter III Construction of Rules and Regulations

Article 9 All units shall carefully formulate seven safety production rules and regulations suitable for the production nature of their own units.

Article 10 Safety education system.

16, special safety education shall be conducted once every quarter, not less than 4 times a year; Grass-roots units conduct special safety education once a month, and important parts (factories, stations, motorcades and branches) conduct safety education once every two months; Every bridge, culvert, oil road construction site and maintenance team should be educated before and after work every day.

17, education should be practical, run classes, blackboard newspapers, slogans and other forms. The necessity of safe production and the harmfulness of accidents should be instilled in all employees and managers.

18, we should do a good job in ideological and political education, labor protection principles and policies education, safety technology knowledge education, typical experience and accident lessons education.

19, the safety management personnel of the whole section should be trained every year. Only after passing the training and examination can they take up their posts.

Article 11 Safety inspection system

1. The safety committee will conduct a special safety inspection every quarter, and will also conduct unscheduled and temporary inspections.

2, grass-roots units check once a month; The maintenance branch shall check once every six months, and the maintenance operation team shall check once a week; Mixing stations, prefabricated parts purchasing plants, various oil depots, material depots and construction sites shall be inspected once a day during the peak production season.

3, safety inspection strictly implement "who is in charge, who is responsible for; Who checks, who is responsible; Who signs, who is responsible. "

4. The contents of safety inspection include: (1) inspection ideas. Mainly refers to the understanding of safety work; (2) Check the site. Check whether the safety facilities are complete, whether the personnel of each type of work carry out the operation procedures and whether there is any illegal command phenomenon; (3) Check for hidden dangers. Whether hidden dangers are found and rectified in time; (4) Check whether the system is sound and whether it is implemented; (5) Check whether the management system is complete and whether the management means are feasible.

5. For any special safety inspection, the leaders of all units should personally lead the team, strictly check, leave no dead ends, find problems, point them out in time, put forward specific rectification opinions and requirements, and follow them up.

6, factories, stations, construction sites, branches, maintenance teams, find out hidden dangers, can make rectification on their own, should be reported to the rectification in a timely manner.

Twelfth safety work conference system

1, Duan and its subordinate units should pay attention to safety at every meeting and achieve "five simultaneities", that is, when planning, arranging, inspecting, summarizing and assessing production work, they should plan, arrange, inspect, summarize and assess safety work at the same time.

2. The team should hold more than 4 safety situation analysis meetings every year to study and analyze the safety work situation, convey and implement the spirit of the superior documents, sum up the safety work experience, find out the existing problems and reasons, and study the specific methods to solve the problems.

3. The Safety Committee shall hold more than 3 safety meetings every year to arrange, guide and summarize various safety activities, put forward requirements and summarize the safety work at the stage.

4, grass-roots units held a safety meeting once a month, summed up the exchange situation, find out the cause of the problem, clear the next step of safety work.

5. The safety work site experience exchange meeting will be held once a year, and grass-roots units will hold more than 2 safety work site exchange meetings every year.

6, safety work meeting should have detailed work records, neat handwriting, well preserved.

Thirteenth safety responsibility system

1, the network management mode is adopted for safety work, the safety indicators are decomposed layer by layer, and the post responsibility system for safety production is implemented step by step, so that everyone can ask about safety work and someone can take care of it everywhere.

2. Formulate, modify and improve the post responsibility system for safety production of all kinds of personnel at all levels, strictly implement the responsibility system based on posts, and avoid the responsibility system based on people.

3, layers of production safety liability form, in accordance with the content of the liability form earnestly implement.

4, strict implementation of the responsibility system, the first level, the first level is responsible for the first level, layers of implementation, diversified safety management pattern.

For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd