Optical cat bridging refers to turning off the routing function of optical cat and using it as a pure modem to better cooperate with external routers. When setting up the optical cat bridge, it is sometimes necessary to log in to the optical cat management interface for relevant configuration.

Logging in to the light cat management interface usually requires installing light cat management software on the computer. The specific operation steps are as follows:

1. First, connect the computer with the light cat through the network cable.

2. Open a browser and enter the default website address of the management page of the light cat, usually "192.168.1.1".

3. Enter Guang Mao's username and password in the login interface that pops up. If it has not been set, you can try to enter the default account password, usually "admin" and "admin".

4. Click the login button to enter the light cat management page.

After logging in to the optical cat management interface, you can make relevant configurations as needed, including optical cat bridging, wireless network setting, port forwarding, etc. It should be noted that when bridging the optical cat, it must be set as required to avoid network instability or other problems caused by improper setting. At the same time, before any configuration, it is best to make a backup so that you can recover quickly when there is a problem in the future.