Method of setting web connection for tplink router 1, home router with traditional interface
First, log in to the router interface. The general address is 192. 168. 1 or192.168.1.253, depending on the login address written on the back of the router.
Log in to the router interface, in Security Functions >: Remote WEB Management: modify the WEB management port, select Enable in the remote WEB management state, and set the IP address of remote WEB management to 255.255.255.255 (that is, all external computers are allowed to access the router interface), as shown in the following figure:
After the setting is completed, the router prompts to restart, and the setting will not take effect until the router is restarted.
Please note the following two points.
[1] Common ports such as 80 and 8080 are easily blocked by broadband service providers, so it is suggested to set the WEB management port as an uncommon port, such as a port above 9000.
[2] After modifying the WEB management port, the intranet computer needs to use access.
3. Enterprise router
Log in to the router interface and click System Tools >: Device Management/Account Management > Remote Management: add an entry of 0.0.0.0/32 (0.0.0.0/32 means that all external computers can access the router). The added address list is as follows.
At the same time, set the WEB service port in System Tools > Device Management/Management Account > System Management Settings.
Some enterprise router interfaces will prompt to save the configuration. Please make sure to save the configuration.
pay attention to
[1] ER5 series Internet cafe router click system service >: Web servers are set in remote management and service settings respectively, and the setting method is the same as above.
[2] TL-ER7520G must add the remote address entry 0.0.0.0/0.
Check the IP address of the router WAN port in the running state, and enter http://WAN IP: port in the browser address bar of the external network computer for remote access. As shown in the figure below:
Note:121.201.33.100 is just an example. Please refer to the actual IP address when accessing.
If a dynamic domain name is registered on the router, you can also use the http:// domain name: port to access it.
?
Articles about tplink router setting up web connection;
How to set up remote web management for 1 Tp450g router?
2. How to set up router Web authentication?
3. How does a TP router remotely manage the web?
4.TP-LINK wireless router detailed setup tutorial