I. Strictly perform the following duties and obligations at work:
1. Firmly establish the idea of "everyone is responsible for safety in production" and "safety first, prevention first and comprehensive treatment", and consciously abide by the company's various safety and environmental management rules and regulations and operating procedures.
2. New employees must attend the three-level safety and environmental protection education in the company, workshop and team, and can only take up their posts after passing the examination.
3. Seriously participate in the safety team study and daily briefing, actively participate in various safety production and environmental protection activities, care about safety and environmental protection work, and take the initiative to put forward reasonable suggestions on safety production and environmental protection.
4. Strengthen the awareness of self-protection, wear labor protection articles correctly, care for each other and urge to achieve "four no injuries" (I don't hurt myself, I don't hurt others, I don't get hurt by others, I protect others from harm).
5. Understand the working environment of the construction site, check the tools and mechanical equipment used at any time, and do not dismantle the safety protection devices on the mechanical equipment without authorization. Don't touch the equipment and facilities that have nothing to do with this job, and don't enter dangerous places that have nothing to do with yourself.
6. Be familiar with the technological process and operation skills, and do a good job of handover. Finish the work, clean up the materials and clean up the site.
7. The accident should be reported in time and actively participate in the rescue. At the same time, the scene of the accident should be protected and the investigators should be provided with truthful information.
8. Have the right to refuse the illegal command and criticize or accuse the wrong decision or behavior that violates the safety and environmental management regulations.
Second, strictly implement the following operating procedures:
1. Wear personal protective equipment before work.
Don't drink and drive, don't smoke, eat and chat while driving.
3. Before starting the vehicle, check the sensitivity and reliability of the brake, steering wheel, horn, lighting and hydraulic system. It is forbidden to drive with illness.
4. Before starting, see clearly whether there are pedestrians and obstacles before and after, and then press the horn to start stepping. In and out of the factory gate, workshop and warehouse, you should honk your horn to slow down and drive to the right; When crossing the intersection, you should "slow down, watch it and cross it"; When passing the car, be polite and do "three firsts" (let go first, slow down first, stop first); It is forbidden to overtake by force.
5. Vehicles driving in the factory area, the maximum speed shall not exceed 20km; The speed of entering and leaving workshops, warehouses, docks and bends shall not exceed 5 kilometers per hour; The speed in the workshop and warehouse shall not exceed 3 kilometers per hour. It is forbidden to drive laterally on roads with a slope greater than 20 degrees. Vehicles are not allowed to be overloaded. When the forklift shovels objects, the height of the bucket shall not exceed 2/3 of the height of the whole vehicle, and the height of the bucket from the ground shall not be greater than 0.5m during operation.
6. No one is allowed to go up, down, climb or jump when the vehicle is running and not stopped. The cab is not allowed to be overcrowded, and it is forbidden to carry passengers on the pedal, shovel teeth, roof and bumper of the vehicle.
7. When forklift shovels heavy objects, it is found that the rear or side tires are off the ground, so stop immediately and stop shoveling. Stacked objects should be neat and smooth to prevent collapse accidents.
8. After the work is completed, the vehicle must be braked and shut down. The shovel teeth of the forklift should be placed on the ground. When the driver gets off the bus, he should take off the key, close the door and window, and do a good job of succession.
9. In the cold winter, the water in the water tank should be released after work to prevent frost cracking.
If I seriously violate the relevant regulations on safety in production, I will voluntarily accept the punishment of the branch, workshop and team, and bear the corresponding consequences.
Employee's signature:
Forklift truck workers' safety production notification commitment letter and safety production responsibility letter
In order to strengthen the safety management of forklifts, prevent production safety accidents, and ensure the safety of life and property, according to the Law of People's Republic of China (PRC) on Safety in Production and the Regulations on Safety Supervision of Special Equipment, and in line with the principle of people-oriented, forklift drivers voluntarily make the following commitments to this unit:
1.
2. Voluntary acceptance of safety education and training organized by the unit. Strictly abide by the safety production rules and regulations of the unit, and do not violate the rules and regulations of forklift operation.
3.
4. Drunk driving, fatigue driving, speeding or overloading driving are strictly prohibited. Do a good job of daily maintenance. Before use, you must check whether the forklift is in good condition, especially: direction control, horn, brakes, tires, lighting, etc. , and handle and report any abnormal situation in time.
5. When leaving the forklift or not using the forklift, please unplug the key. Keep it safe and don't lend it to others. Otherwise, the consequences are at your own risk. In case of major accidents, legal responsibilities will be investigated.
6. If illegal operation is found, the car keys are not removed or lent to others, a fine of 50-200 yuan will be imposed.
Principal responsible person of the unit: signature of the promisor:
Date: Date: