First, the basic provisions of driller 1. Personnel engaged in drilling work must receive safety education before taking up their posts. New workers must operate under the guidance of the monitor or skilled workers. 2, engaged in drilling personnel must have certain health conditions. It is forbidden to drink alcohol before and during work. 4. When employees work at the airport, they must have complete protective equipment, wear safety helmet, work clothes and work shoes or rubber shoes, and the tower crane must wear a seat belt. Second, lifting drilling post safety operation procedures 1, abide by the basic rules of drilling workers. 2. Before lifting the drilling tool, check the operation of the lifting system, whether the brake handle is flexible and reliable, and whether all lifting tools such as wire rope and traveling block are in good trial operation. 3, should pay attention to the mechanical operation in lifting, whether the sound is normal, whether the wire rope neatly arranged. 4. When lifting drilling tools, you should concentrate your thoughts, always pay attention to the situation of the tower body up and down and the orifice, and pay attention to the operation of the traveling block to ensure the smooth lifting of drilling tools. 5. Supervise the safe operation of other posts, and be cautious, centralized, consistent in slogan and action, accurate in action, cooperative and safe in operation. 6. When the situation in the hole is complicated, report to the team leader in time and take corresponding measures. 7. When lifting drilling tools, it is forbidden to carry out repair work unrelated to lifting drilling tools on the tower. 8. When lowering the drilling tool and tripping in and lifting it, the incision of the elevator must be downward, and someone must hold or drag the drilling tool with the trolley slide. 9. The elevator shall be operated steadily and slowly, and it is strictly forbidden to operate savagely, and it shall be coordinated with the wellhead operator and the personnel in the tower. 10. When towing drilling tools, the floormen should stand outside the lifting range of drilling tools. 1 1. When loosening the drilling tool, it is not easy to use excessive force, and the pad fork should have a safety hook to prevent flying fork. 12, don't touch the wire rope with your hands when lifting drilling tools. 13. After the drilling tool rises, cover the orifice. When the large-diameter drilling tool is hung above the orifice, it is not allowed to visit the core in the core tube. 14. When using the closed elevator or other elevator for climbing pole, the mushroom head must be tightened, and the wire rope should be loosened before unscrewing the drill pipe to prevent the mushroom head from falling off. The elevator should go up along the drill pipe, and slow down when passing through the coupling to prevent the drill pipe from hurting people. 15. When using the ball clamp remover, be sure to check whether the inner sleeve and pin are flexible and easy to use. When tightening or lowering the drilling tool, the safety pin must be inserted. 16, wire rope fixed head, each must use three rope clips, it is forbidden to use knotted and worn wire rope, so as not to break or hurt people. Three. Basic rules for safe operation of orifice pad fork hill 1. Observe the basic rules of the driller. 2. When shifting the fork, pad the fork, pay attention to the operation of the traveling block and elevator, and cooperate closely with elevator operators. 3. When shifting the fork pad fork, it is forbidden to put your hands under the pad fork and pedal turntable. 4, move the drill pipe, feet to leave the drill pipe falling range. 5. When using rotary table to unload drilling tools, personnel should leave the orifice and stand in a safe position to prevent flying forks from hurting people. 6. When lifting the drilling tool upwards, the incision of the elevator should be downward to prevent the snap ring from slipping and the drilling tool from falling and hurting people. 7, once found to run drill, don't rob to insert the pad fork, in case the pad fork is damaged and hurts people. 8. When the cushion fork is not in place or the cushion fork does not fall to the bottom, the safety ring of the elevator cannot be removed. 9. It is forbidden to use the rotary table to drive the pipe wrench to unscrew the drilling tool. Four, tower crane mount guard safety operation procedures 1, abide by the basic provisions of the driller. 2. It is forbidden to touch the running wire rope with hands when climbing the tower. 3, tower and elevator posted unified slogan, to prevent personal accidents caused by mistakes. 4, the use of tools to tie up, to prevent falling cuts. 5. Don't throw things down from the tower. 6. Regularly check the derrick foundation, car body, screws, guy ropes and various parts on the derrick, and rectify in time if any hidden danger is found. 7, strong ascension, the tower shall not be retained. 8. Before climbing the tower, check whether the safety accessories of the movable workbench are complete and in good condition, and then climb the tower after confirmation. You must wear a safety belt when working on the tower. Five, drilling tool post safety operation procedures 1, abide by the basic provisions of the driller. 2. During the shift change, all tools should be counted, and the damaged tools should be repaired and replaced in time. 3. Repair or replace the damaged floor in time to keep the machine flat and clean. 4. Carefully check the safety protection device of the drilling rig during the shift change, and maintain it in time when problems are found. 5, the lubrication of the crown block and pulley block, check once a day, and timely refueling. 6. At the end of the shift, the airport environment should be clean and the tools should be intact. Six, mechanical and electrical post safety operation procedures 1, abide by the basic provisions of the driller and hold electrician certificate. 2, circuit maintenance, generally not allowed to live work, when it is really necessary to work on behalf of electricity, must be supervised, and do a good job in various safety protection measures to prevent equipment and personal accidents. 3, maintenance of electrical equipment, you must first disconnect the power supply, remove the wire wrap. 4. Choose a safe place when working, and ensure the safety and reliability of the supporting crane and ladder, and pay attention to whether there is a charged body nearby and whether it can be touched when raising your head and moving your arm. 5. Fasten your seat belt and anklet when working high above the ground. The ladder should be secure, and the guardian should do a good job of monitoring to prevent the ladder and anklet from slipping and falling objects from high altitude. 6, when working on the maintenance circuit equipment and lines, must hang check power outage signs. Non-working personnel are prohibited from turning on the power supply. Check carefully before closing, and make sure that no one is overhauled and the temporary grounding has been removed before closing and sending. 7. When the switch trips or the burnt-out insurance is serious, you must first find out the reason, and then close or break-brake, so as to avoid accidents. 8, mechanical and electrical equipment, transmission belt, open gear, grinding wheel, coupling close to the ground, shaft, pulley and flywheel and other dangerous parts to install protective devices. 9. Be familiar with the maintenance, management and troubleshooting of electrical equipment and circuits. 10, manage and use airport fire fighting equipment and take fire prevention measures. 1 1, all kinds of mechanical and electrical equipment should be operated, disassembled and overhauled by trained and qualified full-time personnel. 12, electrical equipment appearance should be kept clean, prevent be affected with damp. Seven, mud pump post safety operation procedures 1, abide by the basic provisions of the driller. 2. Check the connection between the water pump protection device and the high-pressure pipeline during the shift change, and maintain it in time when problems are found. 3. When preparing mud, strictly follow the mud technical specifications, and strictly manage and rationally use chemicals. 4. When using caustic soda and other corrosive chemicals, goggles and rubber gloves must be worn to prevent liquid from splashing on the skin. 5, keep the instrument effective, damaged to replace in time. Eight, recorder safety operation procedures 1, abide by the basic rules of drilling workers. 2, security team meeting records should be accurate and specific, should have the number of participants, meeting content and safety requirements. 3, security team inspection records should be accurate and timely, to find out the unsafe factors recorded one by one and corrective measures to people. 4, accident records should be detailed (time, place, accident, etc. ) .5 Data such as drilling tool length and hole depth shall be accurately recorded.

The above safety operation procedures for each post in drilling construction shall be collected and sorted by Zhong Da Consulting Company.

For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd